1993-2002 Chevrolet Camaro 3 Piece Rear Wing Spoiler - FRP
1993-2002 Chevrolet Camaro 3-Piece Rear Wing Spoiler – FRP
Three-piece FRP rear wing delivers clean lines and structural rigidity for track or street. Built from fiberglass-reinforced plastic and shipped in raw FRP condition, this wing breaks down into manageable sections for easier handling and fitment. The modular design lets you adjust mounting angles and spacing to dial in your exact look and downforce preference.
Key Features
- Three-piece assembly - Separates into main wing and support sections for simpler installation and transport.
- FRP material - Lightweight and durable compared to steel, resists UV degradation.
- Modular construction - Allows fine-tuning of wing angle and positioning during setup.
Specs
- Material: Fiberglass-reinforced plastic (FRP)
- Configuration: 3-piece wing assembly
- Condition: Brand new
What's Included
- 3-piece rear wing assembly
Frequently Asked Questions
What's the difference between a three-piece and single-piece wing design?
A three-piece wing separates into distinct sections — the main wing blade and mounting supports. This modular approach makes transport easier and lets you adjust the wing's angle and height on the car before final fastening. Single-piece designs lock you into one fixed geometry from the start.
Does this wing maintain stability at highway speeds?
Yes. The three-piece FRP construction distributes loads across multiple mounting points, and the sectional design allows you to dial in the angle during installation to optimize aerodynamic balance for your specific driving. Check that your mounting surface is clean and fasteners are properly secured before highway use.
Will this interfere with trunk lid operation?
That depends on your chosen mounting height and angle. Before drilling any holes, test-fit the wing assembly against the trunk opening and lid clearance. Mark where the main blade sits relative to the lid's full range of motion to ensure no contact when opening and closing.
1993-2002 Chevrolet Camaro 3-Piece Rear Wing Spoiler – FRP
Three-piece FRP rear wing delivers clean lines and structural rigidity for track or street. Built from fiberglass-reinforced plastic and shipped in raw FRP condition, this wing breaks down into manageable sections for easier handling and fitment. The modular design lets you adjust mounting angles and spacing to dial in your exact look and downforce preference.
Key Features
- Three-piece assembly - Separates into main wing and support sections for simpler installation and transport.
- FRP material - Lightweight and durable compared to steel, resists UV degradation.
- Modular construction - Allows fine-tuning of wing angle and positioning during setup.
Specs
- Material: Fiberglass-reinforced plastic (FRP)
- Configuration: 3-piece wing assembly
- Condition: Brand new
What's Included
- 3-piece rear wing assembly
Frequently Asked Questions
What's the difference between a three-piece and single-piece wing design?
A three-piece wing separates into distinct sections — the main wing blade and mounting supports. This modular approach makes transport easier and lets you adjust the wing's angle and height on the car before final fastening. Single-piece designs lock you into one fixed geometry from the start.
Does this wing maintain stability at highway speeds?
Yes. The three-piece FRP construction distributes loads across multiple mounting points, and the sectional design allows you to dial in the angle during installation to optimize aerodynamic balance for your specific driving. Check that your mounting surface is clean and fasteners are properly secured before highway use.
Will this interfere with trunk lid operation?
That depends on your chosen mounting height and angle. Before drilling any holes, test-fit the wing assembly against the trunk opening and lid clearance. Mark where the main blade sits relative to the lid's full range of motion to ensure no contact when opening and closing.
- Fitment verified for YOUR exact year/model/trim
- Not sure? Call +1 772-277-2495 for a real specialist to help you order
- Got install questions? Text a tech who's actually installed this part before, even after it arrives
FREE Shipping
Select your exact model and see if this part fits
1993-2002 Chevrolet Camaro 3 Piece Rear Wing Spoiler - FRP is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Wrong fit or arrives damaged? Free replacement or refund
30,000+ Happy Customers
30-Day Returns
One Year Warranty
Details
Details
1993-2002 Chevrolet Camaro 3-Piece Rear Wing Spoiler – FRP
Three-piece FRP rear wing delivers clean lines and structural rigidity for track or street. Built from fiberglass-reinforced plastic and shipped in raw FRP condition, this wing breaks down into manageable sections for easier handling and fitment. The modular design lets you adjust mounting angles and spacing to dial in your exact look and downforce preference.
Key Features
- Three-piece assembly - Separates into main wing and support sections for simpler installation and transport.
- FRP material - Lightweight and durable compared to steel, resists UV degradation.
- Modular construction - Allows fine-tuning of wing angle and positioning during setup.
Specs
- Material: Fiberglass-reinforced plastic (FRP)
- Configuration: 3-piece wing assembly
- Condition: Brand new
What's Included
- 3-piece rear wing assembly
Frequently Asked Questions
What's the difference between a three-piece and single-piece wing design?
A three-piece wing separates into distinct sections — the main wing blade and mounting supports. This modular approach makes transport easier and lets you adjust the wing's angle and height on the car before final fastening. Single-piece designs lock you into one fixed geometry from the start.
Does this wing maintain stability at highway speeds?
Yes. The three-piece FRP construction distributes loads across multiple mounting points, and the sectional design allows you to dial in the angle during installation to optimize aerodynamic balance for your specific driving. Check that your mounting surface is clean and fasteners are properly secured before highway use.
Will this interfere with trunk lid operation?
That depends on your chosen mounting height and angle. Before drilling any holes, test-fit the wing assembly against the trunk opening and lid clearance. Mark where the main blade sits relative to the lid's full range of motion to ensure no contact when opening and closing.
Fitment
Fitment
How To Get The Best Results
How To Get The Best Results
Duraflex is the go-to choice for builders doing a proper custom build using flexible fiberglass engineered to be shaped, fitted, and finished by a body shop. This is how serious aero work gets done.
The build process:
- Sand and smooth the surface before fitting, which is standard for fiberglass aero
- Test fit before you paint. Pros always do this, it's part of the process
- Minor waves, pinholes, or uneven edges are normal and part of what your body shop will address during prep
- Prime, paint, and finish to your exact spec and color
Best for:
- Builds already going in for bodywork or paint
- Projects where you want aggressive styling at a price that leaves budget for quality paint
- Builders working with shops familiar with fiberglass aero, which is most of them
Got questions before you order? Text a tech who's actually installed this part, even after it arrives.
Our Guarantee
Our Guarantee
Warranty Assurance:
At K2 Industries, your satisfaction is our priority, and we stand behind the quality of our products. Here's a brief overview of our warranty:
Defect Coverage:
If you find a defect after receiving your order, get in touch with us. We're committed to resolving the issue, whether it involves a replacement, repair, or refund.
Installation Note:
Please inspect your purchase before installation. Unfortunately, damages post-installation are not covered, so ensure everything looks good beforehand.
Claims Made Simple:
Need to make a claim? Reach out to us at support@k2-industries.com. We're here to assist you. Just keep your original packaging and documentation handy.
Your Satisfaction Matters:
Your trust in K2 Industries is appreciated. We're dedicated to ensuring your satisfaction with our quality automotive parts.
Shipping & Returns
Shipping & Returns
Shipping Information:
At K2 Industries, we strive to provide a seamless and efficient shopping experience for automotive enthusiasts like you. Our commitment is to deliver high-quality parts to your doorstep with the utmost care.
Fast and Reliable Shipping:
Many of our products are stocked in our local warehouse, ensuring swift processing and delivery. Orders placed for these items typically ship within 2-5 business days, allowing you to get your parts in no time.
Extended Selection, Global Reach:
To offer you a broader range of automotive parts, some items are sourced from trusted suppliers around the world. While these products might have a slightly longer processing time, we assure you that the wait is worth it for the exceptional quality and value they bring.
Shipping Transparency:
For products shipped internationally, we provide estimated delivery times on the product page. Rest assured, we are continually working to optimize our supply chain and minimize any potential delays.
Combined Shipments:
To streamline your shopping experience, if your order includes items from both our local warehouse and international suppliers, they may be shipped separately. You will receive separate tracking information for each shipment.
Questions or Concerns?
If you have any questions about shipping or would like assistance tracking your order, our dedicated customer support team is here to help. Feel free to reach out to us at support@k2-industries.com.
You can also track your order here
Thank you for choosing K2 Industries for your automotive needs. We appreciate your trust in us.
FAQs
Will this fit the factory trunk?
It's made for the vehicle fitment listed on this page. Confirm your model and trunk style before ordering, especially if your car has an aftermarket trunk or existing spoiler holes.
Will I need to drill into my trunk?
Some spoilers use 3M tape mounting (no drilling), others require bolt-through installation. The spec sheet tells you which. Once holes are drilled, they can't be undone.
Does it ship painted or unpainted?
Most ship unpainted and require paint to match your vehicle. A small number are available pre-painted in factory colors — the spec sheet tells you which.
Will a rear wing affect my backup camera or sensors?
Most wings sit above the trunk and don't interfere with backup cameras or parking sensors. Tall wings on hatchbacks may affect rear visibility — check the install photos to see how it sits relative to your rear glass.
1993-2002 Chevrolet Camaro 3 Piece Rear Wing Spoiler - FRP
This Is How Serious Builds Get Done
Duraflex has been the go-to aero choice for serious builders for over 20 years. These parts are flexible fiberglass pieces engineered to be shaped, prepped, and painted to your exact spec. If you're doing a proper build with body shop work planned, this is the right part.
What to expect
Parts ship unpainted and require professional prep, prime, and paint before final installation. Minor adjustments during fitting are normal and expected, this is how custom builds get a factory-quality result.
Caleb D.
Verified Purchase
2006–2011 BMW 3 Series E90
Caleb D.
Verified Purchase
2006–2011 BMW 3 Series E90
"Delivery guys were super meticulous and helpful, all around great service throughout the shipping process. Got the bumper put on and painted next day! Overall it looks great."
The K2 Difference
- • Built by enthusiasts who've made every fitment mistake you're afraid of. Now we verify parts for 30,000+ builds a year with zero wrong-part claims.
- • Real specialists answer your questions in minutes, not chatbots reading scripts. We've built the same cars you're building.
- • Freight damage, wrong parts, installation question, we handle it so you don't deal with suppliers or shipping companies.
Built By Someone Who's Been There
Max, the Owner, started in his garage making E36 M3 tail lights in his own oven.
- • Started modifying cars before he could legally drive them
- • Spent years hunting down parts that actually fit and don't suck
- • Made the same fitment mistakes you're afraid of
Why Buy Duraflex From K2 Vs. Anywhere Else
See Why Customers Love K2 Industries
Frequently Asked Questions
Will this fit my exact year, make, and trim?
Will this fit my exact year, make, and trim?
Fitment is verified for your specific vehicle before it ships. If you want confirmation before ordering, text our team and we'll verify your exact year, make, trim, and body type in under 5 minutes.
Do I need a body shop to install this?
Do I need a body shop to install this?
Yes. Duraflex parts are engineered for professional prep, prime, and paint. They're built for builders doing a proper custom finish. Your body shop has almost certainly worked with Duraflex before, it's the most widely used fiberglass aero brand in the aftermarket.
What does the prep and install process look like?
What does the prep and install process look like?
Your shop will sand, test-fit, smooth any minor imperfections, prime, and paint to your exact color spec. Minor waves or uneven edges on raw fiberglass are completely normal and are addressed during prep, this is standard for any custom aero build.
How close will the panel gaps be?
How close will the panel gaps be?
Duraflex parts are designed to fit within acceptable custom aero tolerances. Because they're flexible fiberglass rather than OEM plastic, minor adjustments during fitting are normal and expected. Your body shop will dial in the gaps during the test-fit stage before paint.
What if my part arrives damaged?
What if my part arrives damaged?
Send us some photos. We ship a replacement. You don't file freight claims, you don't wait weeks, we handle it immediately.
Can I still get help after the part is installed?
Can I still get help after the part is installed?
Yes. Text a tech who's actually installed this exact part, even after it arrives. Most places disappear after the sale. We don't.
What if it doesn't fit at all?
What if it doesn't fit at all?
If there's a genuine fitment issue, not a prep issue, we make it right. Our team will work with you directly to find the correct part or issue a refund.
Can I pay in installments?
Can I pay in installments?
Yes, we offer flexible financing options to make it easier for you to upgrade your vehicle without paying the full amount upfront. Choose our financing option at checkout to split your purchase into manageable payments, so you can start your build now and pay over time.
How long will it take to receive my order?
How long will it take to receive my order?
It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.
Do you ship overseas?
Do you ship overseas?
Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.
