Yonristic Audi RS Q8 Exhaust VANTA Edition Valved Catback Double X-Pipe 3"
Audi RS Q8 Valved Catback Exhaust Performance Upgrade
Dual 3-inch architecture. Twin X-pipe acoustics. Super-SUV sound, fully unleashed.
The Audi RS Q8 delivers immense performance on paper, but the factory exhaust system holds back much of the V8’s character. Designed around strict global noise regulations, the OEM layout prioritizes suppression over expression, flattening the engine’s voice and compressing flow at higher RPM. Our RS Q8 catback exhaust is engineered to remove those constraints and give the twin-turbo V8 the clarity, aggression, and presence it deserves.
The system runs a true dual 3-inch layout from the front of the catback to the rear outlets, avoiding the stepped-down diameters commonly found in factory and aftermarket alternatives. The increased cross-section lowers backpressure and maintains exhaust gas velocity under load, allowing the engine to breathe freely as boost and RPM rise. At the heart of the system is a dual X-pipe strategy. The first X-pipe sits in the mid-section, blending exhaust pulses early to smooth low- and mid-range frequencies while eliminating uneven resonance during steady cruising. A second X-pipe positioned before the rear section further refines phase alignment and harmonic balance, sharpening the exhaust note and giving it a clean, exotic edge as it exits the system. Together, these X-pipes don’t just add volume—they control the waveform, delivering a sound that is tight, aggressive, and high-definition.
This is a fully valved exhaust system, allowing the RS Q8 to switch personalities instantly. With the valves open, exhaust flow follows a near straight-through path from the dual 3-inch midpipes, across the rear X-pipe, and out through the quad outlets. The result is maximum volume, rapid throttle response, and a sharp, motorsport-inspired V8 tone with crisp overrun behavior. With the valves closed, gases are routed through a carefully tuned rear canister designed to suppress boom and cabin resonance while retaining a deep, authoritative character. Daily driving remains refined and comfortable, while aggressive driving unleashes the full super-SUV experience at the push of a button.
Every component is engineered for precision fitment and long-term durability. The system is developed using 3D scans of the RS Q8 underbody, ensuring accurate routing, ideal clearances, and OEM-style mounting. Mandrel bends preserve true 3-inch diameter through every curve, and all welds are hand-finished TIG for strength, consistency, and a show-quality finish. Customers can choose between AISI 304 stainless steel for maximum corrosion resistance or Ti-6Al-4V Grade 5 titanium for significant weight reduction and a more vivid, high-energy acoustic character. Oversized quad tips are designed to perfectly fill the factory diffuser openings and are available in brushed, polished, black, or burnt finishes.
The result is a complete transformation of the RS Q8—quiet and composed when you want it, ferocious and exotic when you don’t. This system doesn’t just make the RS Q8 louder; it makes it sound correct.
Key Features
Configuration
-
True dual 3.0-inch mandrel-bent piping
-
Twin X-pipe design: one in the mid-section, one before the rear section
-
Valved dual-path system with straight-through and muffled routing
Performance
-
Horsepower Gain: ~ +18–23 HP @ higher RPM
-
Torque Gain: ~ +14–20 lb-ft
-
Reduced backpressure for improved throttle response and boost efficiency
Materials & Construction
-
AISI 304 Stainless Steel – long-term durability and corrosion resistance
-
Ti-6Al-4V Grade 5 Titanium – lightweight, resonance-enhancing option
-
Fully hand TIG-welded construction
-
CNC-machined flanges and brackets for factory-level fitment
Tips
-
Quad 4.0-inch oversized outlets
-
Available finishes: brushed, polished, black, burnt
Installation
-
Designed from full 3D vehicle scan data
-
100% bolt-on installation
-
No cutting or welding required
Vehicle Fitment
-
Audi RS Q8
-
Model Years: 2020+
Built for a More Controlled Exhaust Experience
The Audi RS Q8 valved catback exhaust is designed for drivers who want stronger performance, better sound control, and a more aggressive look without sacrificing everyday comfort. This Yonristic VANTA Edition system uses a valved design, allowing the exhaust note to change based on driving mode and throttle input. When the valves are open, the RS Q8 delivers a deeper, sharper tone that matches its high-performance character. When closed, the system stays more refined for daily use. It is an ideal upgrade for owners who want a balanced solution that improves both excitement and drivability.
Double X-Pipe 3-Inch Flow Design
At the core of this system is a 3-inch double X-pipe layout, engineered to improve exhaust flow and create a more refined performance sound. The X-pipe design helps balance exhaust pulses, which can support smoother flow and a cleaner tone under acceleration. This layout also enhances the overall sound quality, giving the RS Q8 a more exotic and premium exhaust note. With reduced restriction and improved gas movement, the system is built to complement the power and presence of the Audi RS Q8. It is a practical performance upgrade for enthusiasts who want noticeable results.
VANTA Edition Styling and Premium Fitment
The VANTA Edition adds a bold, performance-focused look that fits the RS Q8’s aggressive design language. Built with attention to detail, this catback system is made to deliver a clean fit and an OEM-style finish that integrates well with the vehicle’s rear profile. The polished construction and modern design make it a strong visual upgrade as well as a functional one. For Audi owners, fitment matters just as much as sound, and this system is made to meet those expectations. It offers a premium appearance, reliable construction, and a clear upgrade over the factory exhaust setup.
Why This Upgrade Makes Sense for RS Q8 Owners
Choosing an Audi RS Q8 valved catback exhaust is about more than louder sound. It is about improving the driving experience with better control, stronger presence, and more dynamic character. This Yonristic system is ideal for drivers who want their RS Q8 to feel more responsive and sound more exciting without losing comfort during normal commuting. The combination of valved operation, 3-inch flow, and double X-pipe performance makes it a well-rounded choice for street use and spirited driving. For owners who want a meaningful exhaust upgrade, this system delivers a premium blend of sound, style, and performance.
Audi RS Q8 Valved Catback Exhaust Performance Upgrade
Dual 3-inch architecture. Twin X-pipe acoustics. Super-SUV sound, fully unleashed.
The Audi RS Q8 delivers immense performance on paper, but the factory exhaust system holds back much of the V8’s character. Designed around strict global noise regulations, the OEM layout prioritizes suppression over expression, flattening the engine’s voice and compressing flow at higher RPM. Our RS Q8 catback exhaust is engineered to remove those constraints and give the twin-turbo V8 the clarity, aggression, and presence it deserves.
The system runs a true dual 3-inch layout from the front of the catback to the rear outlets, avoiding the stepped-down diameters commonly found in factory and aftermarket alternatives. The increased cross-section lowers backpressure and maintains exhaust gas velocity under load, allowing the engine to breathe freely as boost and RPM rise. At the heart of the system is a dual X-pipe strategy. The first X-pipe sits in the mid-section, blending exhaust pulses early to smooth low- and mid-range frequencies while eliminating uneven resonance during steady cruising. A second X-pipe positioned before the rear section further refines phase alignment and harmonic balance, sharpening the exhaust note and giving it a clean, exotic edge as it exits the system. Together, these X-pipes don’t just add volume—they control the waveform, delivering a sound that is tight, aggressive, and high-definition.
This is a fully valved exhaust system, allowing the RS Q8 to switch personalities instantly. With the valves open, exhaust flow follows a near straight-through path from the dual 3-inch midpipes, across the rear X-pipe, and out through the quad outlets. The result is maximum volume, rapid throttle response, and a sharp, motorsport-inspired V8 tone with crisp overrun behavior. With the valves closed, gases are routed through a carefully tuned rear canister designed to suppress boom and cabin resonance while retaining a deep, authoritative character. Daily driving remains refined and comfortable, while aggressive driving unleashes the full super-SUV experience at the push of a button.
Every component is engineered for precision fitment and long-term durability. The system is developed using 3D scans of the RS Q8 underbody, ensuring accurate routing, ideal clearances, and OEM-style mounting. Mandrel bends preserve true 3-inch diameter through every curve, and all welds are hand-finished TIG for strength, consistency, and a show-quality finish. Customers can choose between AISI 304 stainless steel for maximum corrosion resistance or Ti-6Al-4V Grade 5 titanium for significant weight reduction and a more vivid, high-energy acoustic character. Oversized quad tips are designed to perfectly fill the factory diffuser openings and are available in brushed, polished, black, or burnt finishes.
The result is a complete transformation of the RS Q8—quiet and composed when you want it, ferocious and exotic when you don’t. This system doesn’t just make the RS Q8 louder; it makes it sound correct.
Key Features
Configuration
-
True dual 3.0-inch mandrel-bent piping
-
Twin X-pipe design: one in the mid-section, one before the rear section
-
Valved dual-path system with straight-through and muffled routing
Performance
-
Horsepower Gain: ~ +18–23 HP @ higher RPM
-
Torque Gain: ~ +14–20 lb-ft
-
Reduced backpressure for improved throttle response and boost efficiency
Materials & Construction
-
AISI 304 Stainless Steel – long-term durability and corrosion resistance
-
Ti-6Al-4V Grade 5 Titanium – lightweight, resonance-enhancing option
-
Fully hand TIG-welded construction
-
CNC-machined flanges and brackets for factory-level fitment
Tips
-
Quad 4.0-inch oversized outlets
-
Available finishes: brushed, polished, black, burnt
Installation
-
Designed from full 3D vehicle scan data
-
100% bolt-on installation
-
No cutting or welding required
Vehicle Fitment
-
Audi RS Q8
-
Model Years: 2020+
Built for a More Controlled Exhaust Experience
The Audi RS Q8 valved catback exhaust is designed for drivers who want stronger performance, better sound control, and a more aggressive look without sacrificing everyday comfort. This Yonristic VANTA Edition system uses a valved design, allowing the exhaust note to change based on driving mode and throttle input. When the valves are open, the RS Q8 delivers a deeper, sharper tone that matches its high-performance character. When closed, the system stays more refined for daily use. It is an ideal upgrade for owners who want a balanced solution that improves both excitement and drivability.
Double X-Pipe 3-Inch Flow Design
At the core of this system is a 3-inch double X-pipe layout, engineered to improve exhaust flow and create a more refined performance sound. The X-pipe design helps balance exhaust pulses, which can support smoother flow and a cleaner tone under acceleration. This layout also enhances the overall sound quality, giving the RS Q8 a more exotic and premium exhaust note. With reduced restriction and improved gas movement, the system is built to complement the power and presence of the Audi RS Q8. It is a practical performance upgrade for enthusiasts who want noticeable results.
VANTA Edition Styling and Premium Fitment
The VANTA Edition adds a bold, performance-focused look that fits the RS Q8’s aggressive design language. Built with attention to detail, this catback system is made to deliver a clean fit and an OEM-style finish that integrates well with the vehicle’s rear profile. The polished construction and modern design make it a strong visual upgrade as well as a functional one. For Audi owners, fitment matters just as much as sound, and this system is made to meet those expectations. It offers a premium appearance, reliable construction, and a clear upgrade over the factory exhaust setup.
Why This Upgrade Makes Sense for RS Q8 Owners
Choosing an Audi RS Q8 valved catback exhaust is about more than louder sound. It is about improving the driving experience with better control, stronger presence, and more dynamic character. This Yonristic system is ideal for drivers who want their RS Q8 to feel more responsive and sound more exciting without losing comfort during normal commuting. The combination of valved operation, 3-inch flow, and double X-pipe performance makes it a well-rounded choice for street use and spirited driving. For owners who want a meaningful exhaust upgrade, this system delivers a premium blend of sound, style, and performance.
- Fitment verified for YOUR exact year/model/trim
- Not sure? Call +1 772-277-2495 for a real specialist to help you order
- Got install questions? Text a tech who's actually installed this part before, even after it arrives
FREE Shipping
Select your exact model and see if this part fits
Yonristic Audi RS Q8 Exhaust VANTA Edition Valved Catback Double X-Pipe 3" - AISI304 Stainless Steel is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Wrong fit or arrives damaged? Free replacement or refund
30,000+ Happy Customers
30-Day Returns
One Year Warranty
Details
Details
Audi RS Q8 Valved Catback Exhaust Performance Upgrade
Dual 3-inch architecture. Twin X-pipe acoustics. Super-SUV sound, fully unleashed.
The Audi RS Q8 delivers immense performance on paper, but the factory exhaust system holds back much of the V8’s character. Designed around strict global noise regulations, the OEM layout prioritizes suppression over expression, flattening the engine’s voice and compressing flow at higher RPM. Our RS Q8 catback exhaust is engineered to remove those constraints and give the twin-turbo V8 the clarity, aggression, and presence it deserves.
The system runs a true dual 3-inch layout from the front of the catback to the rear outlets, avoiding the stepped-down diameters commonly found in factory and aftermarket alternatives. The increased cross-section lowers backpressure and maintains exhaust gas velocity under load, allowing the engine to breathe freely as boost and RPM rise. At the heart of the system is a dual X-pipe strategy. The first X-pipe sits in the mid-section, blending exhaust pulses early to smooth low- and mid-range frequencies while eliminating uneven resonance during steady cruising. A second X-pipe positioned before the rear section further refines phase alignment and harmonic balance, sharpening the exhaust note and giving it a clean, exotic edge as it exits the system. Together, these X-pipes don’t just add volume—they control the waveform, delivering a sound that is tight, aggressive, and high-definition.
This is a fully valved exhaust system, allowing the RS Q8 to switch personalities instantly. With the valves open, exhaust flow follows a near straight-through path from the dual 3-inch midpipes, across the rear X-pipe, and out through the quad outlets. The result is maximum volume, rapid throttle response, and a sharp, motorsport-inspired V8 tone with crisp overrun behavior. With the valves closed, gases are routed through a carefully tuned rear canister designed to suppress boom and cabin resonance while retaining a deep, authoritative character. Daily driving remains refined and comfortable, while aggressive driving unleashes the full super-SUV experience at the push of a button.
Every component is engineered for precision fitment and long-term durability. The system is developed using 3D scans of the RS Q8 underbody, ensuring accurate routing, ideal clearances, and OEM-style mounting. Mandrel bends preserve true 3-inch diameter through every curve, and all welds are hand-finished TIG for strength, consistency, and a show-quality finish. Customers can choose between AISI 304 stainless steel for maximum corrosion resistance or Ti-6Al-4V Grade 5 titanium for significant weight reduction and a more vivid, high-energy acoustic character. Oversized quad tips are designed to perfectly fill the factory diffuser openings and are available in brushed, polished, black, or burnt finishes.
The result is a complete transformation of the RS Q8—quiet and composed when you want it, ferocious and exotic when you don’t. This system doesn’t just make the RS Q8 louder; it makes it sound correct.
Key Features
Configuration
-
True dual 3.0-inch mandrel-bent piping
-
Twin X-pipe design: one in the mid-section, one before the rear section
-
Valved dual-path system with straight-through and muffled routing
Performance
-
Horsepower Gain: ~ +18–23 HP @ higher RPM
-
Torque Gain: ~ +14–20 lb-ft
-
Reduced backpressure for improved throttle response and boost efficiency
Materials & Construction
-
AISI 304 Stainless Steel – long-term durability and corrosion resistance
-
Ti-6Al-4V Grade 5 Titanium – lightweight, resonance-enhancing option
-
Fully hand TIG-welded construction
-
CNC-machined flanges and brackets for factory-level fitment
Tips
-
Quad 4.0-inch oversized outlets
-
Available finishes: brushed, polished, black, burnt
Installation
-
Designed from full 3D vehicle scan data
-
100% bolt-on installation
-
No cutting or welding required
Vehicle Fitment
-
Audi RS Q8
-
Model Years: 2020+
Built for a More Controlled Exhaust Experience
The Audi RS Q8 valved catback exhaust is designed for drivers who want stronger performance, better sound control, and a more aggressive look without sacrificing everyday comfort. This Yonristic VANTA Edition system uses a valved design, allowing the exhaust note to change based on driving mode and throttle input. When the valves are open, the RS Q8 delivers a deeper, sharper tone that matches its high-performance character. When closed, the system stays more refined for daily use. It is an ideal upgrade for owners who want a balanced solution that improves both excitement and drivability.
Double X-Pipe 3-Inch Flow Design
At the core of this system is a 3-inch double X-pipe layout, engineered to improve exhaust flow and create a more refined performance sound. The X-pipe design helps balance exhaust pulses, which can support smoother flow and a cleaner tone under acceleration. This layout also enhances the overall sound quality, giving the RS Q8 a more exotic and premium exhaust note. With reduced restriction and improved gas movement, the system is built to complement the power and presence of the Audi RS Q8. It is a practical performance upgrade for enthusiasts who want noticeable results.
VANTA Edition Styling and Premium Fitment
The VANTA Edition adds a bold, performance-focused look that fits the RS Q8’s aggressive design language. Built with attention to detail, this catback system is made to deliver a clean fit and an OEM-style finish that integrates well with the vehicle’s rear profile. The polished construction and modern design make it a strong visual upgrade as well as a functional one. For Audi owners, fitment matters just as much as sound, and this system is made to meet those expectations. It offers a premium appearance, reliable construction, and a clear upgrade over the factory exhaust setup.
Why This Upgrade Makes Sense for RS Q8 Owners
Choosing an Audi RS Q8 valved catback exhaust is about more than louder sound. It is about improving the driving experience with better control, stronger presence, and more dynamic character. This Yonristic system is ideal for drivers who want their RS Q8 to feel more responsive and sound more exciting without losing comfort during normal commuting. The combination of valved operation, 3-inch flow, and double X-pipe performance makes it a well-rounded choice for street use and spirited driving. For owners who want a meaningful exhaust upgrade, this system delivers a premium blend of sound, style, and performance.
Fitment
Fitment
Our Guarantee
Our Guarantee
Warranty Assurance:
At K2 Industries, your satisfaction is our priority, and we stand behind the quality of our products. Here's a brief overview of our warranty:
Defect Coverage:
If you find a defect after receiving your order, get in touch with us. We're committed to resolving the issue, whether it involves a replacement, repair, or refund.
Installation Note:
Please inspect your purchase before installation. Unfortunately, damages post-installation are not covered, so ensure everything looks good beforehand.
Claims Made Simple:
Need to make a claim? Reach out to us at support@k2-industries.com. We're here to assist you. Just keep your original packaging and documentation handy.
Your Satisfaction Matters:
Your trust in K2 Industries is appreciated. We're dedicated to ensuring your satisfaction with our quality automotive parts.
Shipping & Returns
Shipping & Returns
Shipping Information:
At K2 Industries, we strive to provide a seamless and efficient shopping experience for automotive enthusiasts like you. Our commitment is to deliver high-quality parts to your doorstep with the utmost care.
Fast and Reliable Shipping:
Many of our products are stocked in our local warehouse, ensuring swift processing and delivery. Orders placed for these items typically ship within 2-5 business days, allowing you to get your parts in no time.
Extended Selection, Global Reach:
To offer you a broader range of automotive parts, some items are sourced from trusted suppliers around the world. While these products might have a slightly longer processing time, we assure you that the wait is worth it for the exceptional quality and value they bring.
Shipping Transparency:
For products shipped internationally, we provide estimated delivery times on the product page. Rest assured, we are continually working to optimize our supply chain and minimize any potential delays.
Combined Shipments:
To streamline your shopping experience, if your order includes items from both our local warehouse and international suppliers, they may be shipped separately. You will receive separate tracking information for each shipment.
Questions or Concerns?
If you have any questions about shipping or would like assistance tracking your order, our dedicated customer support team is here to help. Feel free to reach out to us at support@k2-industries.com.
You can also track your order here
Thank you for choosing K2 Industries for your automotive needs. We appreciate your trust in us.
FAQs
Will this require a tune after installation?
Bolt-ons like exhaust tips, cat-backs, and basic intakes usually don't. Larger mods — turbo upgrades, supercharger kits, headers — typically need an ECU tune to run safely. The spec sheet indicates if tuning is recommended.
Is this part emissions / CARB compliant?
If you're in California or another CARB-regulated state, check the CARB status on this page before ordering. Many performance parts are off-road or competition use only — if so, we say it clearly.
Will installing this void my factory warranty?
Modifications can affect manufacturer warranty on related components only — not your entire warranty. The Magnuson-Moss Warranty Act protects you from blanket warranty voids. If warranty matters to you, talk to your dealer before installing.
Can I install this myself?
Depends on the part. Bolt-ons are DIY-friendly. Turbo upgrades, headers, and supercharger kits need a professional shop. The product description gives a difficulty estimate.
Yonristic Audi RS Q8 Exhaust VANTA Edition Valved Catback Double X-...
The K2 Difference
- • Built by enthusiasts who've made every fitment mistake you're afraid of. Now we verify parts for 30,000+ builds a year with zero wrong-part claims.
- • Real specialists answer your questions in minutes, not chatbots reading scripts. We've built the same cars you're building.
- • Freight damage, wrong parts, installation question, we handle it so you don't deal with suppliers or shipping companies.
Built By Someone Who's Been There
Max, the Owner, started in his garage making E36 M3 tail lights in his own oven.
- • Started modifying cars before he could legally drive them
- • Spent years hunting down parts that actually fit and don't suck
- • Made the same fitment mistakes you're afraid of
What You Get With Every Order
What Sets K2 Industries Apart?
Perfect fit guaranteedFrequently Asked Questions
How do I know this will actually fit my car?
How do I know this will actually fit my car?
Every part listing shows compatible years, models, and trims. But here's the thing—trim packages and factory options can be confusing. If you're not 100% certain, text us at 772-277-2495 with your VIN or photos of your car. We'll verify fitment before you order so you're not stuck with an $800 part that doesn't fit. We've done this for 30,000+ builds. We've seen every weird trim combo and factory option. Takes us 2 minutes to verify, saves you weeks of headaches.
What if the part arrives damaged or is the wrong item?
What if the part arrives damaged or is the wrong item?
We handle it. You don't fight with freight companies or file claims. Text us photos within 48 hours of delivery. If it's damaged or wrong, we ship a replacement immediately. You're not waiting 6 weeks for a freight claim to process. We eat the cost, not you. This is why we package everything like it's going to war. But if something slips through, we fix it ASAP. No forms, no back-and-forth, no "file a claim and wait." Just text us and we handle it.
Can I install this myself or do I need a shop?
Can I install this myself or do I need a shop?
Depends on the part. Emblems, front lips, some spoilers, bolt-on, DIY-friendly, you can do it in your driveway with basic tools. Full bumpers, hoods, wide-body kits, possible for experienced DIYers but most people take them to a shop for paint and install. Check the product description for installation difficulty. If you're unsure, text us. We'll be honest about whether you can handle it or if you should take it to a pro. We'd rather you know upfront than get frustrated halfway through.
What's your return policy if it doesn't fit or I don't like it?
What's your return policy if it doesn't fit or I don't like it?
30 days, unused parts in original packaging. You pay return shipping unless we sent the wrong part or it arrived defective. Once you install it, modify it, paint it, or mount it, we can't take it back. That's why we push so hard on verifying fitment BEFORE you order. We don't want you stuck with something you can't use. Text us before ordering if you're unsure. We'll confirm fitment so you never have to worry about returns.
Do you offer financing?
Do you offer financing?
Yes. Affirm and Shop Pay available at checkout for orders over $50. Split payments over 3-12 months depending on order size. No hard credit check to see your options. Most people use this for big-ticket items like body kits, suspension setups, or wheel/tire packages. Rates vary based on credit. You see the monthly payment before you commit. Makes it easier to build now instead of waiting months to save up.
What if I have questions after I receive the part?
What if I have questions after I receive the part?
Text 772-277-2495. We don't disappear after you buy. Fitment questions, installation issues, "does this bolt go here" questions... we'll walk you through it. We've installed these parts ourselves or helped hundreds of people install them. You're not getting transferred to a call center in the Philippines. You're texting someone who's actually installed your part before. If we can't help remotely, we'll recommend a local shop that knows these parts.
Why should I buy from K2 instead of eBay/Amazon/other sites?
Why should I buy from K2 instead of eBay/Amazon/other sites?
eBay and Amazon sellers don't answer fitment questions. They don't verify your VIN before shipping. They don't handle freight damage claims for you. If something goes wrong, you're filing disputes and waiting weeks. We're builders selling to builders. We verify fitment before you order. We handle damage claims same-day. We answer texts in minutes. We're not the cheapest, but you're not gambling $800 on whether a part fits. You're paying for support, verification, and someone who cares if your build goes sideways.
What does your warranty cover?
What does your warranty cover?
1 year against manufacturing defects: cracking, warping, paint peeling, hardware failure, fitment issues caused by the part being made wrong. Does NOT cover installation damage (you cracked it bolting it on), road damage (curb rash, rock chips), or normal wear. If it breaks because we made it wrong, we replace it free. If it breaks because you hit a parking block, that's on you. We're fair about it. Send photos and we'll tell you honestly if it's covered.
Shipping
Do you ship overseas?
Do you ship overseas?
Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.
How much does shipping cost and when will I see the total?
How much does shipping cost and when will I see the total?
Depending on where you're located, small parts can ship free. Large parts like bumpers, hoods, and body kits require freight shipping. Uou'll see the exact cost at checkout before you pay. Freight usually runs $150-$300 depending on size and your location. We know it's expensive. We negotiate the best rates we can. If you're ordering multiple large parts, text us. We can sometimes combine shipping and save you money. We're not hiding fees in the final step. What you see at checkout is what you pay.
How long will it take to receive my order?
How long will it take to receive my order?
It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.
