Chevrolet Corvette C5 / Camaro Z28 / SS, Pontiac Firebird Formula / Trans Am & GTO LS1 Billet Aluminium Throttle Cable Bracket Kit for 102mm Aftermarket Intake Manifolds (1997 - 2004)

Complete your LS1 102mm aftermarket intake manifold installation with this premium billet aluminium throttle cable bracket kit, precision CNC-machined from aircraft-grade 6061-T6 aluminium for permanent durability and proper throttle cable routing. When installing a 102mm aftermarket intake manifold (FAST 102, Holley HiRam, MSD Atomic, TSP, BTR, or similar) on your LS1-powered Corvette, Camaro, Firebird, or GTO, the factory throttle cable bracket no longer aligns with the new intake manifold geometry — leaving the throttle cable improperly routed, potentially binding, and unable to mount cleanly. This bracket kit solves the problem with purpose-built throttle cable mounting that aligns properly with 102mm sheet metal intake manifolds, providing both standard throttle body and inverted (upside-down) throttle body mounting options for maximum hood clearance flexibility. Aircraft-grade billet aluminium construction delivers permanent durability while keeping weight low for serious LS performance builds.

Features:

• Premium 6061-T6 aircraft-grade billet aluminium construction – delivers exceptional strength while keeping weight low
• CNC machined precision – ensures perfect fit to 102mm aftermarket intake manifold geometry
• Compatible with all 102mm sheet metal intake manifolds – fits FAST 102, Holley HiRam, MSD Atomic, TSP, BTR, and similar aftermarket intakes
• Dual throttle cable bracket configuration – includes brackets for both standard and inverted throttle body orientations
• Inverted throttle body support – provides additional hood clearance when needed for aggressive intake manifold installations
• Thickened bracket construction – delivers superior rigidity compared to thinner aftermarket alternatives
• Anodized surface finish – delivers corrosion resistance and a clean professional aesthetic for long-term engine bay durability
• Complete kit – includes support bracket, dual throttle cable brackets, and all required mounting hardware

Specifications:

• Condition: 100% Brand New
• Type: LS1 Throttle Cable Bracket Kit (102mm Intake Compatible)
• Material: 6061-T6 Aircraft-Grade Billet Aluminium
• Construction: CNC Machined
• Surface Finish: Anodized
• Item Weight: 0.35 kg
• Quantity: Complete Kit (3 Pieces + Hardware)
• Position: Throttle Cable Mounting / Intake Manifold
• Engine Compatibility: Chevrolet LS1
• Intake Compatibility: 102mm Aftermarket Sheet Metal Intake Manifolds
• Purpose: Performance Build Component / Throttle Cable Routing

Fitment:

• Chevrolet Corvette C5 (1997 – 2004) – Excludes Z06
• Chevrolet Camaro Z28 / SS (1998 – 2002)
• Pontiac Firebird Formula / Trans Am (1998 – 2002)
• Pontiac GTO (2004)
• Compatible with vehicles using 102mm aftermarket sheet metal intake manifolds
• Confirm vehicle model, engine configuration, and intake manifold specification before ordering

Contents:

• 1x Support Bracket
• 2x Front Throttle Cable Brackets (one for standard throttle body orientation, one for inverted/upside-down placement)
• All required mounting hardware

Benefits:

• Enables clean professional throttle cable routing on 102mm aftermarket intake manifold installations – the most common LS1 performance intake upgrade requires this kind of supporting hardware
• Solves the throttle cable misalignment problem that develops when factory cable brackets no longer fit aftermarket intake manifold geometry
• Inverted throttle body capability provides critical hood clearance options – particularly valuable for aggressive cammed builds, raised intake manifolds, or low-hood applications
• Aircraft-grade 6061-T6 billet aluminium construction permanently outlasts factory or budget aftermarket components
• CNC machined precision ensures perfect fitment without modification – installs cleanly without grinding, drilling, or fabrication
• Anodized finish maintains the premium aluminium appearance over years of engine bay heat exposure
• Significant cost savings compared to fabricating custom brackets – this purpose-built kit eliminates the need for one-off fabrication work
• Foundation product for serious LS1 performance builds – pairs naturally with 102mm intake manifolds, large throttle bodies, and supporting performance components

Installation Notes:

• Intake compatibility verification required: Confirm your aftermarket intake manifold uses 102mm throttle body geometry before ordering – this kit is not compatible with stock LS1 intake manifolds or smaller throttle body configurations
• Throttle body orientation choice: Decide whether you'll install the throttle body in standard or inverted orientation before installation – the kit includes brackets for both configurations, but installation procedure differs
• Allow the engine to fully cool before beginning installation to avoid burns from hot engine components
• Disconnect the negative battery terminal before beginning installation to prevent electrical issues
• Remove the existing throttle body, throttle cable, and any factory cable mounting hardware – inspect for damage during removal
• Install the support bracket to the intake manifold mounting points using included hardware
• Select the appropriate front throttle cable bracket based on your throttle body orientation (standard or inverted)
• Mount the throttle cable bracket to the support bracket and align with the throttle body cable mounting position
• Route the throttle cable through the new bracket configuration – ensure smooth cable travel without binding
• Tighten all mounting hardware to manufacturer-specified torque values using a calibrated torque wrench
• Verify smooth throttle operation through full pedal travel before starting the engine
• Reconnect battery and test throttle response at idle before driving
• Test full RPM range operation at low speeds before aggressive driving
• Inspect bracket and cable mounting periodically for any signs of loosening or wear
• Professional installation strongly recommended unless you have experience with LS engine intake manifold and throttle system modifications
• If unsure about compatibility with your specific LS1 application or intake manifold, contact our team with your year, model, intake manifold specification, and throttle body configuration before ordering

Warranty:

• 12-month standard warranty from date of purchase
• Contact our support team for assistance with any issues

Warranty Assurance:

At K2 Industries, your satisfaction is our priority, and we stand behind the quality of our products. Here's a brief overview of our warranty:

Defect Coverage:
If you find a defect after receiving your order, get in touch with us. We're committed to resolving the issue, whether it involves a replacement, repair, or refund.

Installation Note:
Please inspect your purchase before installation. Unfortunately, damages post-installation are not covered, so ensure everything looks good beforehand.

Claims Made Simple:
Need to make a claim? Reach out to us at support@k2-industries.com. We're here to assist you. Just keep your original packaging and documentation handy.

Your Satisfaction Matters:
Your trust in K2 Industries is appreciated. We're dedicated to ensuring your satisfaction with our quality automotive parts.

Shipping Information:

At K2 Industries, we strive to provide a seamless and efficient shopping experience for automotive enthusiasts like you. Our commitment is to deliver high-quality parts to your doorstep with the utmost care.

Fast and Reliable Shipping:
Many of our products are stocked in our local warehouse, ensuring swift processing and delivery. Orders placed for these items typically ship within 2-5 business days, allowing you to get your parts in no time.

Extended Selection, Global Reach:
To offer you a broader range of automotive parts, some items are sourced from trusted suppliers around the world. While these products might have a slightly longer processing time, we assure you that the wait is worth it for the exceptional quality and value they bring.

Shipping Transparency:
For products shipped internationally, we provide estimated delivery times on the product page. Rest assured, we are continually working to optimize our supply chain and minimize any potential delays.

Combined Shipments:
To streamline your shopping experience, if your order includes items from both our local warehouse and international suppliers, they may be shipped separately. You will receive separate tracking information for each shipment.

Questions or Concerns?
If you have any questions about shipping or would like assistance tracking your order, our dedicated customer support team is here to help. Feel free to reach out to us at support@k2-industries.com.

You can also track your order here

Thank you for choosing K2 Industries for your automotive needs. We appreciate your trust in us.