AutoTecknic Dry Carbon Fiber License Plate Frame
AutoTecknic Dry Carbon Fiber License Plate Frame — BMW, Porsche & Exotic Vehicles
The details define the build. Handcrafted from 100% genuine pre-preg dry carbon fiber, the AutoTecknic Dry Carbon Fiber License Plate Frame brings motorsport-grade precision to the finishing touch of your vehicle — because no part of your build should be an afterthought.
Unlike conventional wet-lay carbon fiber license plate frames, AutoTecknic's dry carbon construction uses precision autoclave curing and vacuum-sealed pre-preg materials, delivering a flawless 3K twill weave pattern, razor-sharp edges, and a luxury-grade high-gloss finish with zero air pockets and minimal resin waste. The result is a real carbon fiber license plate frame engineered to the same standard as components found on high-performance exotics, track cars, and luxury sport vehicles.
Feather-light at just 47 grams. Compatible with all standard US and Canadian license plates. Installs in minutes using your factory screws. No compromises, no shortcuts — just the obsessive attention to detail that defines every AutoTecknic carbon fiber product.
Whether you drive a BMW, Porsche, Ferrari, Lamborghini, McLaren, Mercedes-Benz, or Audi, the AutoTecknic carbon fiber license plate frame is the cleanest way to finish your build the right way.
What Sets AutoTecknic Dry Carbon Apart
Most carbon fiber accessories on the market are wet-lay — resin applied by hand, prone to air pockets, inconsistent weave patterns, and excess weight. AutoTecknic uses the same pre-preg dry carbon process trusted by Formula 1 teams and aerospace engineers. Every piece is vacuum-sealed and autoclave-cured under precise heat and pressure, producing a lighter, stronger, and visually flawless result — every single time.
This isn't a carbon look. This is carbon.
Product Details
- 100% real pre-preg dry carbon fiber construction
- Motorsport-inspired 3K twill weave pattern
- Wider bottom strip for a bold, refined look
- High-gloss UV-protected finish for long-lasting clarity
- Lightweight: 47g / 1.66 oz
- Standard US/Canadian license plate size: 12.4" x 6.3" x 0.3"
- Two top mounting holes for easy, secure installation
- Compatible with all standard US and Canadian license plates
- 1-Year limited warranty
Frequently Asked Questions
What vehicles does the AutoTecknic carbon fiber license plate frame fit?
The AutoTecknic Dry Carbon Fiber License Plate Frame fits all standard US and Canadian license plates, making it compatible with virtually any vehicle — including BMW, Porsche, Mercedes-Benz, Audi, Ferrari, Lamborghini, McLaren, and more.
Is this real carbon fiber or a carbon fiber look?
This is 100% genuine pre-preg dry carbon fiber — not a vinyl wrap, ABS plastic overlay, or wet-lay imitation. AutoTecknic uses the same autoclave-cured pre-preg process found in motorsport and aerospace applications.
What is the difference between dry carbon and wet carbon fiber?
Dry carbon fiber (pre-preg) is manufactured using pre-impregnated resin sheets cured under heat and pressure in an autoclave. This produces a lighter, stronger, and more visually consistent product compared to wet-lay carbon, which applies resin by hand and is more prone to air pockets, resin pooling, and uneven weave patterns.
How do I install the AutoTecknic carbon fiber license plate frame?
Simply align the frame over your license plate and secure using your existing factory screws through the two top mounting holes. No drilling or modification required. Installation takes under five minutes.
Does the AutoTecknic license plate frame come with a warranty?
Yes. Every AutoTecknic carbon fiber license plate frame is backed by a 1-Year limited warranty against manufacturing defects.
Is this compatible with front and rear license plates?
Yes. The frame fits standard US and Canadian plate dimensions and can be used on both front and rear plate mounts.
AutoTecknic Dry Carbon Fiber License Plate Frame — BMW, Porsche & Exotic Vehicles
The details define the build. Handcrafted from 100% genuine pre-preg dry carbon fiber, the AutoTecknic Dry Carbon Fiber License Plate Frame brings motorsport-grade precision to the finishing touch of your vehicle — because no part of your build should be an afterthought.
Unlike conventional wet-lay carbon fiber license plate frames, AutoTecknic's dry carbon construction uses precision autoclave curing and vacuum-sealed pre-preg materials, delivering a flawless 3K twill weave pattern, razor-sharp edges, and a luxury-grade high-gloss finish with zero air pockets and minimal resin waste. The result is a real carbon fiber license plate frame engineered to the same standard as components found on high-performance exotics, track cars, and luxury sport vehicles.
Feather-light at just 47 grams. Compatible with all standard US and Canadian license plates. Installs in minutes using your factory screws. No compromises, no shortcuts — just the obsessive attention to detail that defines every AutoTecknic carbon fiber product.
Whether you drive a BMW, Porsche, Ferrari, Lamborghini, McLaren, Mercedes-Benz, or Audi, the AutoTecknic carbon fiber license plate frame is the cleanest way to finish your build the right way.
What Sets AutoTecknic Dry Carbon Apart
Most carbon fiber accessories on the market are wet-lay — resin applied by hand, prone to air pockets, inconsistent weave patterns, and excess weight. AutoTecknic uses the same pre-preg dry carbon process trusted by Formula 1 teams and aerospace engineers. Every piece is vacuum-sealed and autoclave-cured under precise heat and pressure, producing a lighter, stronger, and visually flawless result — every single time.
This isn't a carbon look. This is carbon.
Product Details
- 100% real pre-preg dry carbon fiber construction
- Motorsport-inspired 3K twill weave pattern
- Wider bottom strip for a bold, refined look
- High-gloss UV-protected finish for long-lasting clarity
- Lightweight: 47g / 1.66 oz
- Standard US/Canadian license plate size: 12.4" x 6.3" x 0.3"
- Two top mounting holes for easy, secure installation
- Compatible with all standard US and Canadian license plates
- 1-Year limited warranty
Frequently Asked Questions
What vehicles does the AutoTecknic carbon fiber license plate frame fit?
The AutoTecknic Dry Carbon Fiber License Plate Frame fits all standard US and Canadian license plates, making it compatible with virtually any vehicle — including BMW, Porsche, Mercedes-Benz, Audi, Ferrari, Lamborghini, McLaren, and more.
Is this real carbon fiber or a carbon fiber look?
This is 100% genuine pre-preg dry carbon fiber — not a vinyl wrap, ABS plastic overlay, or wet-lay imitation. AutoTecknic uses the same autoclave-cured pre-preg process found in motorsport and aerospace applications.
What is the difference between dry carbon and wet carbon fiber?
Dry carbon fiber (pre-preg) is manufactured using pre-impregnated resin sheets cured under heat and pressure in an autoclave. This produces a lighter, stronger, and more visually consistent product compared to wet-lay carbon, which applies resin by hand and is more prone to air pockets, resin pooling, and uneven weave patterns.
How do I install the AutoTecknic carbon fiber license plate frame?
Simply align the frame over your license plate and secure using your existing factory screws through the two top mounting holes. No drilling or modification required. Installation takes under five minutes.
Does the AutoTecknic license plate frame come with a warranty?
Yes. Every AutoTecknic carbon fiber license plate frame is backed by a 1-Year limited warranty against manufacturing defects.
Is this compatible with front and rear license plates?
Yes. The frame fits standard US and Canadian plate dimensions and can be used on both front and rear plate mounts.
- Fitment verified for YOUR exact year/model/trim
- Not sure? Call +1 772-277-2495 for a real specialist to help you order
- Got install questions? Text a tech who's actually installed this part before, even after it arrives
Select your exact model and see if this part fits
AutoTecknic Dry Carbon Fiber License Plate Frame is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Wrong fit or arrives damaged? Free replacement or refund
Details
Details
AutoTecknic Dry Carbon Fiber License Plate Frame — BMW, Porsche & Exotic Vehicles
The details define the build. Handcrafted from 100% genuine pre-preg dry carbon fiber, the AutoTecknic Dry Carbon Fiber License Plate Frame brings motorsport-grade precision to the finishing touch of your vehicle — because no part of your build should be an afterthought.
Unlike conventional wet-lay carbon fiber license plate frames, AutoTecknic's dry carbon construction uses precision autoclave curing and vacuum-sealed pre-preg materials, delivering a flawless 3K twill weave pattern, razor-sharp edges, and a luxury-grade high-gloss finish with zero air pockets and minimal resin waste. The result is a real carbon fiber license plate frame engineered to the same standard as components found on high-performance exotics, track cars, and luxury sport vehicles.
Feather-light at just 47 grams. Compatible with all standard US and Canadian license plates. Installs in minutes using your factory screws. No compromises, no shortcuts — just the obsessive attention to detail that defines every AutoTecknic carbon fiber product.
Whether you drive a BMW, Porsche, Ferrari, Lamborghini, McLaren, Mercedes-Benz, or Audi, the AutoTecknic carbon fiber license plate frame is the cleanest way to finish your build the right way.
What Sets AutoTecknic Dry Carbon Apart
Most carbon fiber accessories on the market are wet-lay — resin applied by hand, prone to air pockets, inconsistent weave patterns, and excess weight. AutoTecknic uses the same pre-preg dry carbon process trusted by Formula 1 teams and aerospace engineers. Every piece is vacuum-sealed and autoclave-cured under precise heat and pressure, producing a lighter, stronger, and visually flawless result — every single time.
This isn't a carbon look. This is carbon.
Product Details
- 100% real pre-preg dry carbon fiber construction
- Motorsport-inspired 3K twill weave pattern
- Wider bottom strip for a bold, refined look
- High-gloss UV-protected finish for long-lasting clarity
- Lightweight: 47g / 1.66 oz
- Standard US/Canadian license plate size: 12.4" x 6.3" x 0.3"
- Two top mounting holes for easy, secure installation
- Compatible with all standard US and Canadian license plates
- 1-Year limited warranty
Frequently Asked Questions
What vehicles does the AutoTecknic carbon fiber license plate frame fit?
The AutoTecknic Dry Carbon Fiber License Plate Frame fits all standard US and Canadian license plates, making it compatible with virtually any vehicle — including BMW, Porsche, Mercedes-Benz, Audi, Ferrari, Lamborghini, McLaren, and more.
Is this real carbon fiber or a carbon fiber look?
This is 100% genuine pre-preg dry carbon fiber — not a vinyl wrap, ABS plastic overlay, or wet-lay imitation. AutoTecknic uses the same autoclave-cured pre-preg process found in motorsport and aerospace applications.
What is the difference between dry carbon and wet carbon fiber?
Dry carbon fiber (pre-preg) is manufactured using pre-impregnated resin sheets cured under heat and pressure in an autoclave. This produces a lighter, stronger, and more visually consistent product compared to wet-lay carbon, which applies resin by hand and is more prone to air pockets, resin pooling, and uneven weave patterns.
How do I install the AutoTecknic carbon fiber license plate frame?
Simply align the frame over your license plate and secure using your existing factory screws through the two top mounting holes. No drilling or modification required. Installation takes under five minutes.
Does the AutoTecknic license plate frame come with a warranty?
Yes. Every AutoTecknic carbon fiber license plate frame is backed by a 1-Year limited warranty against manufacturing defects.
Is this compatible with front and rear license plates?
Yes. The frame fits standard US and Canadian plate dimensions and can be used on both front and rear plate mounts.
Fitment
Fitment
Our Guarantee
Our Guarantee
Warranty Assurance:
At K2 Industries, your satisfaction is our priority, and we stand behind the quality of our products. Here's a brief overview of our warranty:
Defect Coverage:
If you find a defect after receiving your order, get in touch with us. We're committed to resolving the issue, whether it involves a replacement, repair, or refund.
Installation Note:
Please inspect your purchase before installation. Unfortunately, damages post-installation are not covered, so ensure everything looks good beforehand.
Claims Made Simple:
Need to make a claim? Reach out to us at support@k2-industries.com. We're here to assist you. Just keep your original packaging and documentation handy.
Your Satisfaction Matters:
Your trust in K2 Industries is appreciated. We're dedicated to ensuring your satisfaction with our quality automotive parts.
Shipping & Returns
Shipping & Returns
Shipping Information:
At K2 Industries, we strive to provide a seamless and efficient shopping experience for automotive enthusiasts like you. Our commitment is to deliver high-quality parts to your doorstep with the utmost care.
Fast and Reliable Shipping:
Many of our products are stocked in our local warehouse, ensuring swift processing and delivery. Orders placed for these items typically ship within 2-5 business days, allowing you to get your parts in no time.
Extended Selection, Global Reach:
To offer you a broader range of automotive parts, some items are sourced from trusted suppliers around the world. While these products might have a slightly longer processing time, we assure you that the wait is worth it for the exceptional quality and value they bring.
Shipping Transparency:
For products shipped internationally, we provide estimated delivery times on the product page. Rest assured, we are continually working to optimize our supply chain and minimize any potential delays.
Combined Shipments:
To streamline your shopping experience, if your order includes items from both our local warehouse and international suppliers, they may be shipped separately. You will receive separate tracking information for each shipment.
Questions or Concerns?
If you have any questions about shipping or would like assistance tracking your order, our dedicated customer support team is here to help. Feel free to reach out to us at support@k2-industries.com.
You can also track your order here
Thank you for choosing K2 Industries for your automotive needs. We appreciate your trust in us.
FAQs
How do I confirm this part fits my vehicle?
Use the vehicle selector at the top of this page to verify fitment. If anything's unclear, send us your year/model/trim (or VIN) via live chat or email support@k2-industries.com — we'll confirm fitment for free, before you commit.
How long until I get my order?
In-stock items typically process in 3-5 business days, then ship — most domestic orders arrive within 3-7 business days after that. Larger freight items take 3-10 days in transit. Some items are made-to-order (carbon fiber, aero kits) and require 10-25 business days of production before shipping — these are marked on the product page.
What if it arrives damaged?
Inspect your shipment when it arrives, take photos of any damage to the box and part, and reach out via live chat or support@k2-industries.com. For freight deliveries, note visible damage on the paperwork before signing. We handle the carrier claim and get you a replacement.
What if I want to return it?
You have 30 days from delivery. As long as the part is uninstalled and in original condition, you can choose between an exchange, store credit (no fees, never expires — our most popular option), or a refund. Drop us a message and we'll walk you through the easiest path.
Can I install this myself, or do I need a shop?
Depends on the part. Some are straightforward DIY, others are body shop or specialist work. Each product page indicates the recommended install path. If you're unsure, message us with your build details and we'll give you a real assessment.
What's the fastest way to reach you?
Live chat and email — typical response time is a few business hours, and you can reach out anytime. Chat with us on the site or email support@k2-industries.com. We resolve issues directly far faster than going through your bank or card processor.
The K2 Difference
- • Built by enthusiasts who've made every fitment mistake you're afraid of. Now we verify parts for 30,000+ builds a year with zero wrong-part claims.
- • Real specialists answer your questions in minutes, not chatbots reading scripts. We've built the same cars you're building.
- • Freight damage, wrong parts, installation question, we handle it so you don't deal with suppliers or shipping companies.
Built By Someone Who's Been There
Max, the Owner, started in his garage making E36 M3 tail lights in his own oven.
- • Started modifying cars before he could legally drive them
- • Spent years hunting down parts that actually fit and don't suck
- • Made the same fitment mistakes you're afraid of
What You Get With Every Order
What Sets K2 Industries Apart?
Frequently Asked Questions
How do I know this will actually fit my car?
How do I know this will actually fit my car?
Every part listing shows compatible years, models, and trims. But here's the thing—trim packages and factory options can be confusing. If you're not 100% certain, text us at 772-277-2495 with your VIN or photos of your car. We'll verify fitment before you order so you're not stuck with an $800 part that doesn't fit. We've done this for 30,000+ builds. We've seen every weird trim combo and factory option. Takes us 2 minutes to verify, saves you weeks of headaches.
What if the part arrives damaged or is the wrong item?
What if the part arrives damaged or is the wrong item?
We handle it. You don't fight with freight companies or file claims. Text us photos within 48 hours of delivery. If it's damaged or wrong, we ship a replacement immediately. You're not waiting 6 weeks for a freight claim to process. We eat the cost, not you. This is why we package everything like it's going to war. But if something slips through, we fix it ASAP. No forms, no back-and-forth, no "file a claim and wait." Just text us and we handle it.
Can I install this myself or do I need a shop?
Can I install this myself or do I need a shop?
Depends on the part. Emblems, front lips, some spoilers, bolt-on, DIY-friendly, you can do it in your driveway with basic tools. Full bumpers, hoods, wide-body kits, possible for experienced DIYers but most people take them to a shop for paint and install. Check the product description for installation difficulty. If you're unsure, text us. We'll be honest about whether you can handle it or if you should take it to a pro. We'd rather you know upfront than get frustrated halfway through.
What's your return policy if it doesn't fit or I don't like it?
What's your return policy if it doesn't fit or I don't like it?
30 days, unused parts in original packaging. You pay return shipping unless we sent the wrong part or it arrived defective. Once you install it, modify it, paint it, or mount it, we can't take it back. That's why we push so hard on verifying fitment BEFORE you order. We don't want you stuck with something you can't use. Text us before ordering if you're unsure. We'll confirm fitment so you never have to worry about returns.
Do you offer financing?
Do you offer financing?
Yes. Affirm and Shop Pay available at checkout for orders over $50. Split payments over 3-12 months depending on order size. No hard credit check to see your options. Most people use this for big-ticket items like body kits, suspension setups, or wheel/tire packages. Rates vary based on credit. You see the monthly payment before you commit. Makes it easier to build now instead of waiting months to save up.
What if I have questions after I receive the part?
What if I have questions after I receive the part?
Text 772-277-2495. We don't disappear after you buy. Fitment questions, installation issues, "does this bolt go here" questions... we'll walk you through it. We've installed these parts ourselves or helped hundreds of people install them. You're not getting transferred to a call center in the Philippines. You're texting someone who's actually installed your part before. If we can't help remotely, we'll recommend a local shop that knows these parts.
Why should I buy from K2 instead of eBay/Amazon/other sites?
Why should I buy from K2 instead of eBay/Amazon/other sites?
eBay and Amazon sellers don't answer fitment questions. They don't verify your VIN before shipping. They don't handle freight damage claims for you. If something goes wrong, you're filing disputes and waiting weeks. We're builders selling to builders. We verify fitment before you order. We handle damage claims same-day. We answer texts in minutes. We're not the cheapest, but you're not gambling $800 on whether a part fits. You're paying for support, verification, and someone who cares if your build goes sideways.
What does your warranty cover?
What does your warranty cover?
1 year against manufacturing defects: cracking, warping, paint peeling, hardware failure, fitment issues caused by the part being made wrong. Does NOT cover installation damage (you cracked it bolting it on), road damage (curb rash, rock chips), or normal wear. If it breaks because we made it wrong, we replace it free. If it breaks because you hit a parking block, that's on you. We're fair about it. Send photos and we'll tell you honestly if it's covered.
Shipping
Do you ship overseas?
Do you ship overseas?
Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.
How much does shipping cost and when will I see the total?
How much does shipping cost and when will I see the total?
Depending on where you're located, small parts can ship free. Large parts like bumpers, hoods, and body kits require freight shipping. Uou'll see the exact cost at checkout before you pay. Freight usually runs $150-$300 depending on size and your location. We know it's expensive. We negotiate the best rates we can. If you're ordering multiple large parts, text us. We can sometimes combine shipping and save you money. We're not hiding fees in the final step. What you see at checkout is what you pay.
How long will it take to receive my order?
How long will it take to receive my order?
It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.





