BMW E81 / E82 / E87 / E88 1 Series, E90 / E91 / E92 / E93 3 Series & E84 X1 Billet Aluminum Rear Trailing Arm & Monoball Bearing Kit 2005 - 2015 (Replaces 33322406291 / 33326763477 / 33326763092)
Eliminate rear suspension flex and restore precise handling on your BMW E8X, E9X, or E84 X1 with this premium billet aluminum rear trailing arm and monoball bearing kit, precision crafted for permanent durability and dramatically improved suspension response. The BMW E9X rear suspension uses a complex five-link design where the trailing arm connects the subframe to the main axle through factory rubber bushings — these factory components are notoriously prone to deformation under aggressive driving (hard braking, hard acceleration, cornering loads), causing dramatic changes in rear suspension geometry that result in handling instability, deflection, and compromised sport performance. This complete kit addresses both the trailing arm itself (rigid billet aluminum construction) and the trailing arm bearing (custom monoball with dust seal) to deliver maximum suspension precision while maintaining street-friendly low NVH characteristics. The result is consistent rear suspension geometry under all driving conditions, sharper handling response, and the direct mechanical feel that performance BMW enthusiasts demand.
Features:
Rear Trailing Arm:
- Sturdy and durable construction – billet aluminum alloy delivers exceptional strength and durability compared to factory stamped components
- Enhanced rigidity – rigid design optimizes rear suspension geometry for better cornering stability and faster response
- Precision CNC engineering – advanced manufacturing ensures perfect fit to factory mounting points
- Direct OE replacement – no calibration required, installs directly into factory trailing arm position
- Improved driving experience – more responsive handling characteristics under all driving conditions
Trailing Arm Bearing:
- Custom-sized monoball bearing – matches factory dimensions for non-destructive replacement of factory rubber bushings using proper installation tools
- Dust cover seal design – keeps debris out and locks grease in for extended bearing life, avoiding the wear-prone conditions common to exposed spherical bearings
- Precision handling – stabilizes camber and toe geometry during cornering, acceleration, and braking for improved steering response
- Direct road feedback – monoball construction transfers spring and damper forces to the ground without rubber bushing lag
- Low NVH increase design – engineered for quiet daily driving with minimal impact on cabin comfort
Specifications:
- Condition: 100% Brand New
- Type: Rear Trailing Arm & Monoball Bearing Kit
- Trailing Arm Material: Billet Aluminum Alloy
- Bearing Material: 40Cr Bearing Steel
- Construction: CNC Machined
- Bearing Design: Sealed Monoball with Dust Cover
- NVH Increase: Low (designed for street use)
- Recommended Use: Street Performance / Spirited Driving
- Item Weight: 4 kg
- Position: Rear Trailing Arm Mount
- Purpose: Performance Upgrade / Suspension Geometry Stabilization
OE / Replacement Part Numbers:
- Trailing Arm: 33322406291 / 33 32 2 406 291
- Trailing Arm: 33326763477 / 33 32 6 763 477
- Trailing Arm Bearing: 33326763092 / 33 32 6 763 092
Fitment:
- BMW 1 Series:
- BMW E81 (2005 – 2013)
- BMW E82 (2007 – 2013) – Coupe
- BMW E87 (2005 – 2013)
- BMW E88 (2007 – 2013) – Convertible
- BMW 3 Series:
- BMW E90 (2005 – 2013) – Sedan
- BMW E91 (2005 – 2013) – Touring / Wagon
- BMW E92 (2005 – 2013) – Coupe
- BMW E93 (2005 – 2013) – Convertible
- BMW X1:
- BMW E84 X1 (2010 – 2015)
- Compatible with all engine variants and trim levels within the listed chassis range
- Confirm vehicle model, chassis code, and production year before ordering
Contents:
- Rear Trailing Arm Set (Pair)
- Rear Trailing Arm Monoball Bearing Set (Pair)
Benefits:
- Eliminates rear suspension geometry deflection caused by deformed factory rubber bushings – critical for consistent handling under aggressive driving
- Stabilizes camber and toe alignment during cornering, acceleration, and braking – maintaining proper rear tire contact patches under all loads
- Improves steering response and handling precision – the rigid trailing arm and monoball bearing combination delivers direct mechanical feedback
- Restores sport performance characteristics – addresses the common complaint of "vague rear-end feel" that develops as factory bushings age
- Billet aluminum trailing arm construction provides permanent dimensional stability – will not bend, crack, or fail under sustained loads
- Custom monoball bearing maintains factory dimensions – enables non-destructive bushing replacement with proper installation tools
- Dust cover seal design provides extended bearing life compared to exposed spherical alternatives – critical for daily-driven vehicles in varied weather conditions
- Low NVH increase design enables street use without harsh ride compromise – delivers performance benefits while maintaining daily driveability
- Comprehensive kit addresses both the trailing arm and bearing – avoiding the partial fix scenario where one wears out faster than the other
- Wide cross-platform compatibility makes this versatile for BMW enthusiasts who manage multiple E8X / E9X / E84 chassis
Important Use-Case Notes:
- Recommended for street and performance use: Designed for street, spirited driving, and weekend track day applications
- Low NVH increase: The monoball bearing design will provide slightly increased steering wheel feedback and road imperfection transfer compared to factory rubber bushings, but is engineered for daily-driver compatibility
- Wheel alignment recommended: Have your vehicle professionally aligned after installation to verify proper rear suspension geometry
- Specialized installation tools: Bearing replacement requires proper bushing extraction/installation tools or hydraulic press for non-destructive installation
Installation Notes:
- Specialized tools required: Trailing arm bearing replacement requires a hydraulic press or proper bushing installation tools – do not attempt installation without correct equipment
- Properly support the rear of the vehicle on jack stands rated for the vehicle weight before beginning installation – never work under a vehicle supported only by a jack
- Mark the original alignment positions of all rear suspension components before disassembly
- Carefully remove the factory rear trailing arms from the vehicle following factory service procedure
- Use proper bushing installation tools to non-destructively replace the factory rubber bushings with the new monoball bearings – the custom-sized monoball matches factory dimensions for clean installation
- Inspect surrounding rear suspension components during installation – worn control arms, sway bar links, or other rear suspension components will compromise the performance benefits of the upgraded trailing arms
- Apply manufacturer-specified grease to the monoball bearing during installation – do not run dry, as this accelerates wear
- Install the new billet aluminum trailing arms in the factory mounting positions
- Tighten all rear suspension hardware to factory torque specifications using a calibrated torque wrench
- Have the vehicle professionally aligned after installation – trailing arm replacement directly affects rear suspension geometry
- Bed in the new components with progressively increased driving loads over the first 100-200 miles before aggressive driving
- Test rear-end behavior at low speeds before aggressive driving
- Professional installation strongly recommended – rear suspension work requires geometry knowledge and proper torque specifications
- If unsure about compatibility with your specific BMW variant, contact our team with your year, model, and chassis code before ordering
Warranty:
- 12-month standard warranty from date of purchase
- Contact our support team for assistance with any issues
Eliminate rear suspension flex and restore precise handling on your BMW E8X, E9X, or E84 X1 with this premium billet aluminum rear trailing arm and monoball bearing kit, precision crafted for permanent durability and dramatically improved suspension response. The BMW E9X rear suspension uses a complex five-link design where the trailing arm connects the subframe to the main axle through factory rubber bushings — these factory components are notoriously prone to deformation under aggressive driving (hard braking, hard acceleration, cornering loads), causing dramatic changes in rear suspension geometry that result in handling instability, deflection, and compromised sport performance. This complete kit addresses both the trailing arm itself (rigid billet aluminum construction) and the trailing arm bearing (custom monoball with dust seal) to deliver maximum suspension precision while maintaining street-friendly low NVH characteristics. The result is consistent rear suspension geometry under all driving conditions, sharper handling response, and the direct mechanical feel that performance BMW enthusiasts demand.
Features:
Rear Trailing Arm:
- Sturdy and durable construction – billet aluminum alloy delivers exceptional strength and durability compared to factory stamped components
- Enhanced rigidity – rigid design optimizes rear suspension geometry for better cornering stability and faster response
- Precision CNC engineering – advanced manufacturing ensures perfect fit to factory mounting points
- Direct OE replacement – no calibration required, installs directly into factory trailing arm position
- Improved driving experience – more responsive handling characteristics under all driving conditions
Trailing Arm Bearing:
- Custom-sized monoball bearing – matches factory dimensions for non-destructive replacement of factory rubber bushings using proper installation tools
- Dust cover seal design – keeps debris out and locks grease in for extended bearing life, avoiding the wear-prone conditions common to exposed spherical bearings
- Precision handling – stabilizes camber and toe geometry during cornering, acceleration, and braking for improved steering response
- Direct road feedback – monoball construction transfers spring and damper forces to the ground without rubber bushing lag
- Low NVH increase design – engineered for quiet daily driving with minimal impact on cabin comfort
Specifications:
- Condition: 100% Brand New
- Type: Rear Trailing Arm & Monoball Bearing Kit
- Trailing Arm Material: Billet Aluminum Alloy
- Bearing Material: 40Cr Bearing Steel
- Construction: CNC Machined
- Bearing Design: Sealed Monoball with Dust Cover
- NVH Increase: Low (designed for street use)
- Recommended Use: Street Performance / Spirited Driving
- Item Weight: 4 kg
- Position: Rear Trailing Arm Mount
- Purpose: Performance Upgrade / Suspension Geometry Stabilization
OE / Replacement Part Numbers:
- Trailing Arm: 33322406291 / 33 32 2 406 291
- Trailing Arm: 33326763477 / 33 32 6 763 477
- Trailing Arm Bearing: 33326763092 / 33 32 6 763 092
Fitment:
- BMW 1 Series:
- BMW E81 (2005 – 2013)
- BMW E82 (2007 – 2013) – Coupe
- BMW E87 (2005 – 2013)
- BMW E88 (2007 – 2013) – Convertible
- BMW 3 Series:
- BMW E90 (2005 – 2013) – Sedan
- BMW E91 (2005 – 2013) – Touring / Wagon
- BMW E92 (2005 – 2013) – Coupe
- BMW E93 (2005 – 2013) – Convertible
- BMW X1:
- BMW E84 X1 (2010 – 2015)
- Compatible with all engine variants and trim levels within the listed chassis range
- Confirm vehicle model, chassis code, and production year before ordering
Contents:
- Rear Trailing Arm Set (Pair)
- Rear Trailing Arm Monoball Bearing Set (Pair)
Benefits:
- Eliminates rear suspension geometry deflection caused by deformed factory rubber bushings – critical for consistent handling under aggressive driving
- Stabilizes camber and toe alignment during cornering, acceleration, and braking – maintaining proper rear tire contact patches under all loads
- Improves steering response and handling precision – the rigid trailing arm and monoball bearing combination delivers direct mechanical feedback
- Restores sport performance characteristics – addresses the common complaint of "vague rear-end feel" that develops as factory bushings age
- Billet aluminum trailing arm construction provides permanent dimensional stability – will not bend, crack, or fail under sustained loads
- Custom monoball bearing maintains factory dimensions – enables non-destructive bushing replacement with proper installation tools
- Dust cover seal design provides extended bearing life compared to exposed spherical alternatives – critical for daily-driven vehicles in varied weather conditions
- Low NVH increase design enables street use without harsh ride compromise – delivers performance benefits while maintaining daily driveability
- Comprehensive kit addresses both the trailing arm and bearing – avoiding the partial fix scenario where one wears out faster than the other
- Wide cross-platform compatibility makes this versatile for BMW enthusiasts who manage multiple E8X / E9X / E84 chassis
Important Use-Case Notes:
- Recommended for street and performance use: Designed for street, spirited driving, and weekend track day applications
- Low NVH increase: The monoball bearing design will provide slightly increased steering wheel feedback and road imperfection transfer compared to factory rubber bushings, but is engineered for daily-driver compatibility
- Wheel alignment recommended: Have your vehicle professionally aligned after installation to verify proper rear suspension geometry
- Specialized installation tools: Bearing replacement requires proper bushing extraction/installation tools or hydraulic press for non-destructive installation
Installation Notes:
- Specialized tools required: Trailing arm bearing replacement requires a hydraulic press or proper bushing installation tools – do not attempt installation without correct equipment
- Properly support the rear of the vehicle on jack stands rated for the vehicle weight before beginning installation – never work under a vehicle supported only by a jack
- Mark the original alignment positions of all rear suspension components before disassembly
- Carefully remove the factory rear trailing arms from the vehicle following factory service procedure
- Use proper bushing installation tools to non-destructively replace the factory rubber bushings with the new monoball bearings – the custom-sized monoball matches factory dimensions for clean installation
- Inspect surrounding rear suspension components during installation – worn control arms, sway bar links, or other rear suspension components will compromise the performance benefits of the upgraded trailing arms
- Apply manufacturer-specified grease to the monoball bearing during installation – do not run dry, as this accelerates wear
- Install the new billet aluminum trailing arms in the factory mounting positions
- Tighten all rear suspension hardware to factory torque specifications using a calibrated torque wrench
- Have the vehicle professionally aligned after installation – trailing arm replacement directly affects rear suspension geometry
- Bed in the new components with progressively increased driving loads over the first 100-200 miles before aggressive driving
- Test rear-end behavior at low speeds before aggressive driving
- Professional installation strongly recommended – rear suspension work requires geometry knowledge and proper torque specifications
- If unsure about compatibility with your specific BMW variant, contact our team with your year, model, and chassis code before ordering
Warranty:
- 12-month standard warranty from date of purchase
- Contact our support team for assistance with any issues
- Fitment verified for YOUR exact year/model/trim
- Not sure? Call +1 772-277-2495 for a real specialist to help you order
- Got install questions? Text a tech who's actually installed this part before, even after it arrives
FREE Shipping
Select your exact model and see if this part fits
BMW E81 / E82 / E87 / E88 1 Series, E90 / E91 / E92 / E93 3 Series & E84 X1 Billet Aluminum Rear Trailing Arm & Monoball Bearing Kit 2005 - 2015 (Replaces 33322406291 / 33326763477 / 33326763092) - Red is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Wrong fit or arrives damaged? Free replacement or refund
30,000+ Happy Customers
30-Day Returns
One Year Warranty
Details
Details
Eliminate rear suspension flex and restore precise handling on your BMW E8X, E9X, or E84 X1 with this premium billet aluminum rear trailing arm and monoball bearing kit, precision crafted for permanent durability and dramatically improved suspension response. The BMW E9X rear suspension uses a complex five-link design where the trailing arm connects the subframe to the main axle through factory rubber bushings — these factory components are notoriously prone to deformation under aggressive driving (hard braking, hard acceleration, cornering loads), causing dramatic changes in rear suspension geometry that result in handling instability, deflection, and compromised sport performance. This complete kit addresses both the trailing arm itself (rigid billet aluminum construction) and the trailing arm bearing (custom monoball with dust seal) to deliver maximum suspension precision while maintaining street-friendly low NVH characteristics. The result is consistent rear suspension geometry under all driving conditions, sharper handling response, and the direct mechanical feel that performance BMW enthusiasts demand.
Features:
Rear Trailing Arm:
- Sturdy and durable construction – billet aluminum alloy delivers exceptional strength and durability compared to factory stamped components
- Enhanced rigidity – rigid design optimizes rear suspension geometry for better cornering stability and faster response
- Precision CNC engineering – advanced manufacturing ensures perfect fit to factory mounting points
- Direct OE replacement – no calibration required, installs directly into factory trailing arm position
- Improved driving experience – more responsive handling characteristics under all driving conditions
Trailing Arm Bearing:
- Custom-sized monoball bearing – matches factory dimensions for non-destructive replacement of factory rubber bushings using proper installation tools
- Dust cover seal design – keeps debris out and locks grease in for extended bearing life, avoiding the wear-prone conditions common to exposed spherical bearings
- Precision handling – stabilizes camber and toe geometry during cornering, acceleration, and braking for improved steering response
- Direct road feedback – monoball construction transfers spring and damper forces to the ground without rubber bushing lag
- Low NVH increase design – engineered for quiet daily driving with minimal impact on cabin comfort
Specifications:
- Condition: 100% Brand New
- Type: Rear Trailing Arm & Monoball Bearing Kit
- Trailing Arm Material: Billet Aluminum Alloy
- Bearing Material: 40Cr Bearing Steel
- Construction: CNC Machined
- Bearing Design: Sealed Monoball with Dust Cover
- NVH Increase: Low (designed for street use)
- Recommended Use: Street Performance / Spirited Driving
- Item Weight: 4 kg
- Position: Rear Trailing Arm Mount
- Purpose: Performance Upgrade / Suspension Geometry Stabilization
OE / Replacement Part Numbers:
- Trailing Arm: 33322406291 / 33 32 2 406 291
- Trailing Arm: 33326763477 / 33 32 6 763 477
- Trailing Arm Bearing: 33326763092 / 33 32 6 763 092
Fitment:
- BMW 1 Series:
- BMW E81 (2005 – 2013)
- BMW E82 (2007 – 2013) – Coupe
- BMW E87 (2005 – 2013)
- BMW E88 (2007 – 2013) – Convertible
- BMW 3 Series:
- BMW E90 (2005 – 2013) – Sedan
- BMW E91 (2005 – 2013) – Touring / Wagon
- BMW E92 (2005 – 2013) – Coupe
- BMW E93 (2005 – 2013) – Convertible
- BMW X1:
- BMW E84 X1 (2010 – 2015)
- Compatible with all engine variants and trim levels within the listed chassis range
- Confirm vehicle model, chassis code, and production year before ordering
Contents:
- Rear Trailing Arm Set (Pair)
- Rear Trailing Arm Monoball Bearing Set (Pair)
Benefits:
- Eliminates rear suspension geometry deflection caused by deformed factory rubber bushings – critical for consistent handling under aggressive driving
- Stabilizes camber and toe alignment during cornering, acceleration, and braking – maintaining proper rear tire contact patches under all loads
- Improves steering response and handling precision – the rigid trailing arm and monoball bearing combination delivers direct mechanical feedback
- Restores sport performance characteristics – addresses the common complaint of "vague rear-end feel" that develops as factory bushings age
- Billet aluminum trailing arm construction provides permanent dimensional stability – will not bend, crack, or fail under sustained loads
- Custom monoball bearing maintains factory dimensions – enables non-destructive bushing replacement with proper installation tools
- Dust cover seal design provides extended bearing life compared to exposed spherical alternatives – critical for daily-driven vehicles in varied weather conditions
- Low NVH increase design enables street use without harsh ride compromise – delivers performance benefits while maintaining daily driveability
- Comprehensive kit addresses both the trailing arm and bearing – avoiding the partial fix scenario where one wears out faster than the other
- Wide cross-platform compatibility makes this versatile for BMW enthusiasts who manage multiple E8X / E9X / E84 chassis
Important Use-Case Notes:
- Recommended for street and performance use: Designed for street, spirited driving, and weekend track day applications
- Low NVH increase: The monoball bearing design will provide slightly increased steering wheel feedback and road imperfection transfer compared to factory rubber bushings, but is engineered for daily-driver compatibility
- Wheel alignment recommended: Have your vehicle professionally aligned after installation to verify proper rear suspension geometry
- Specialized installation tools: Bearing replacement requires proper bushing extraction/installation tools or hydraulic press for non-destructive installation
Installation Notes:
- Specialized tools required: Trailing arm bearing replacement requires a hydraulic press or proper bushing installation tools – do not attempt installation without correct equipment
- Properly support the rear of the vehicle on jack stands rated for the vehicle weight before beginning installation – never work under a vehicle supported only by a jack
- Mark the original alignment positions of all rear suspension components before disassembly
- Carefully remove the factory rear trailing arms from the vehicle following factory service procedure
- Use proper bushing installation tools to non-destructively replace the factory rubber bushings with the new monoball bearings – the custom-sized monoball matches factory dimensions for clean installation
- Inspect surrounding rear suspension components during installation – worn control arms, sway bar links, or other rear suspension components will compromise the performance benefits of the upgraded trailing arms
- Apply manufacturer-specified grease to the monoball bearing during installation – do not run dry, as this accelerates wear
- Install the new billet aluminum trailing arms in the factory mounting positions
- Tighten all rear suspension hardware to factory torque specifications using a calibrated torque wrench
- Have the vehicle professionally aligned after installation – trailing arm replacement directly affects rear suspension geometry
- Bed in the new components with progressively increased driving loads over the first 100-200 miles before aggressive driving
- Test rear-end behavior at low speeds before aggressive driving
- Professional installation strongly recommended – rear suspension work requires geometry knowledge and proper torque specifications
- If unsure about compatibility with your specific BMW variant, contact our team with your year, model, and chassis code before ordering
Warranty:
- 12-month standard warranty from date of purchase
- Contact our support team for assistance with any issues
Fitment
Fitment
Our Guarantee
Our Guarantee
Warranty Assurance:
At K2 Industries, your satisfaction is our priority, and we stand behind the quality of our products. Here's a brief overview of our warranty:
Defect Coverage:
If you find a defect after receiving your order, get in touch with us. We're committed to resolving the issue, whether it involves a replacement, repair, or refund.
Installation Note:
Please inspect your purchase before installation. Unfortunately, damages post-installation are not covered, so ensure everything looks good beforehand.
Claims Made Simple:
Need to make a claim? Reach out to us at support@k2-industries.com. We're here to assist you. Just keep your original packaging and documentation handy.
Your Satisfaction Matters:
Your trust in K2 Industries is appreciated. We're dedicated to ensuring your satisfaction with our quality automotive parts.
Shipping & Returns
Shipping & Returns
Shipping Information:
At K2 Industries, we strive to provide a seamless and efficient shopping experience for automotive enthusiasts like you. Our commitment is to deliver high-quality parts to your doorstep with the utmost care.
Fast and Reliable Shipping:
Many of our products are stocked in our local warehouse, ensuring swift processing and delivery. Orders placed for these items typically ship within 2-5 business days, allowing you to get your parts in no time.
Extended Selection, Global Reach:
To offer you a broader range of automotive parts, some items are sourced from trusted suppliers around the world. While these products might have a slightly longer processing time, we assure you that the wait is worth it for the exceptional quality and value they bring.
Shipping Transparency:
For products shipped internationally, we provide estimated delivery times on the product page. Rest assured, we are continually working to optimize our supply chain and minimize any potential delays.
Combined Shipments:
To streamline your shopping experience, if your order includes items from both our local warehouse and international suppliers, they may be shipped separately. You will receive separate tracking information for each shipment.
Questions or Concerns?
If you have any questions about shipping or would like assistance tracking your order, our dedicated customer support team is here to help. Feel free to reach out to us at support@k2-industries.com.
You can also track your order here
Thank you for choosing K2 Industries for your automotive needs. We appreciate your trust in us.
FAQs
How do I confirm this part fits my vehicle?
Use the vehicle selector at the top of this page to verify fitment. If anything's unclear, send us your year/model/trim (or VIN) via live chat or email support@k2-industries.com — we'll confirm fitment for free, before you commit.
How long until I get my order?
In-stock items typically process in 3-5 business days, then ship — most domestic orders arrive within 3-7 business days after that. Larger freight items take 3-10 days in transit. Some items are made-to-order (carbon fiber, aero kits) and require 10-25 business days of production before shipping — these are marked on the product page.
What if it arrives damaged?
Inspect your shipment when it arrives, take photos of any damage to the box and part, and reach out via live chat or support@k2-industries.com. For freight deliveries, note visible damage on the paperwork before signing. We handle the carrier claim and get you a replacement.
What if I want to return it?
You have 30 days from delivery. As long as the part is uninstalled and in original condition, you can choose between an exchange, store credit (no fees, never expires — our most popular option), or a refund. Drop us a message and we'll walk you through the easiest path.
Can I install this myself, or do I need a shop?
Depends on the part. Some are straightforward DIY, others are body shop or specialist work. Each product page indicates the recommended install path. If you're unsure, message us with your build details and we'll give you a real assessment.
What's the fastest way to reach you?
Live chat and email — typical response time is a few business hours, and you can reach out anytime. Chat with us on the site or email support@k2-industries.com. We resolve issues directly far faster than going through your bank or card processor.
BMW E81 / E82 / E87 / E88 1 Series, E90 / E91 / E92 / E93 3 Series ...
The K2 Difference
- • Built by enthusiasts who've made every fitment mistake you're afraid of. Now we verify parts for 30,000+ builds a year with zero wrong-part claims.
- • Real specialists answer your questions in minutes, not chatbots reading scripts. We've built the same cars you're building.
- • Freight damage, wrong parts, installation question, we handle it so you don't deal with suppliers or shipping companies.
Built By Someone Who's Been There
Max, the Owner, started in his garage making E36 M3 tail lights in his own oven.
- • Started modifying cars before he could legally drive them
- • Spent years hunting down parts that actually fit and don't suck
- • Made the same fitment mistakes you're afraid of
What You Get With Every Order
What Sets K2 Industries Apart?
Perfect fit guaranteedFrequently Asked Questions
How do I know this will actually fit my car?
How do I know this will actually fit my car?
Every part listing shows compatible years, models, and trims. But here's the thing—trim packages and factory options can be confusing. If you're not 100% certain, text us at 772-277-2495 with your VIN or photos of your car. We'll verify fitment before you order so you're not stuck with an $800 part that doesn't fit. We've done this for 30,000+ builds. We've seen every weird trim combo and factory option. Takes us 2 minutes to verify, saves you weeks of headaches.
What if the part arrives damaged or is the wrong item?
What if the part arrives damaged or is the wrong item?
We handle it. You don't fight with freight companies or file claims. Text us photos within 48 hours of delivery. If it's damaged or wrong, we ship a replacement immediately. You're not waiting 6 weeks for a freight claim to process. We eat the cost, not you. This is why we package everything like it's going to war. But if something slips through, we fix it ASAP. No forms, no back-and-forth, no "file a claim and wait." Just text us and we handle it.
Can I install this myself or do I need a shop?
Can I install this myself or do I need a shop?
Depends on the part. Emblems, front lips, some spoilers, bolt-on, DIY-friendly, you can do it in your driveway with basic tools. Full bumpers, hoods, wide-body kits, possible for experienced DIYers but most people take them to a shop for paint and install. Check the product description for installation difficulty. If you're unsure, text us. We'll be honest about whether you can handle it or if you should take it to a pro. We'd rather you know upfront than get frustrated halfway through.
What's your return policy if it doesn't fit or I don't like it?
What's your return policy if it doesn't fit or I don't like it?
30 days, unused parts in original packaging. You pay return shipping unless we sent the wrong part or it arrived defective. Once you install it, modify it, paint it, or mount it, we can't take it back. That's why we push so hard on verifying fitment BEFORE you order. We don't want you stuck with something you can't use. Text us before ordering if you're unsure. We'll confirm fitment so you never have to worry about returns.
Do you offer financing?
Do you offer financing?
Yes. Affirm and Shop Pay available at checkout for orders over $50. Split payments over 3-12 months depending on order size. No hard credit check to see your options. Most people use this for big-ticket items like body kits, suspension setups, or wheel/tire packages. Rates vary based on credit. You see the monthly payment before you commit. Makes it easier to build now instead of waiting months to save up.
What if I have questions after I receive the part?
What if I have questions after I receive the part?
Text 772-277-2495. We don't disappear after you buy. Fitment questions, installation issues, "does this bolt go here" questions... we'll walk you through it. We've installed these parts ourselves or helped hundreds of people install them. You're not getting transferred to a call center in the Philippines. You're texting someone who's actually installed your part before. If we can't help remotely, we'll recommend a local shop that knows these parts.
Why should I buy from K2 instead of eBay/Amazon/other sites?
Why should I buy from K2 instead of eBay/Amazon/other sites?
eBay and Amazon sellers don't answer fitment questions. They don't verify your VIN before shipping. They don't handle freight damage claims for you. If something goes wrong, you're filing disputes and waiting weeks. We're builders selling to builders. We verify fitment before you order. We handle damage claims same-day. We answer texts in minutes. We're not the cheapest, but you're not gambling $800 on whether a part fits. You're paying for support, verification, and someone who cares if your build goes sideways.
What does your warranty cover?
What does your warranty cover?
1 year against manufacturing defects: cracking, warping, paint peeling, hardware failure, fitment issues caused by the part being made wrong. Does NOT cover installation damage (you cracked it bolting it on), road damage (curb rash, rock chips), or normal wear. If it breaks because we made it wrong, we replace it free. If it breaks because you hit a parking block, that's on you. We're fair about it. Send photos and we'll tell you honestly if it's covered.
Shipping
Do you ship overseas?
Do you ship overseas?
Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.
How much does shipping cost and when will I see the total?
How much does shipping cost and when will I see the total?
Depending on where you're located, small parts can ship free. Large parts like bumpers, hoods, and body kits require freight shipping. Uou'll see the exact cost at checkout before you pay. Freight usually runs $150-$300 depending on size and your location. We know it's expensive. We negotiate the best rates we can. If you're ordering multiple large parts, text us. We can sometimes combine shipping and save you money. We're not hiding fees in the final step. What you see at checkout is what you pay.
How long will it take to receive my order?
How long will it take to receive my order?
It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.
