Honda Civic & Acura Integra / RSX K-Series Engine Swap Billet Aluminum Throttle Cable Bracket 1988 - 2006 (LHD Only / RSX Type-S & EP3 Throttle Body)

Complete your K-series engine swap with this premium billet aluminum throttle cable bracket, precision CNC-machined from 6061 aircraft-grade aluminum for permanent durability and proper throttle cable routing on your converted Honda Civic or Acura Integra / RSX. K-series engine swaps (transplanting K20A, K20A2, K20Z1, K24, or similar K-series engines into earlier Honda chassis) require a properly sized cable-pull throttle cable bracket compatible with the K-series throttle body — and the factory throttle cable brackets from older B-series and D-series engines don't align correctly with the K-series throttle body geometry. This purpose-built bracket solves that problem with proper alignment for K-series throttle bodies (specifically the 2002-2006 RSX Type-S and EP3 Civic Si configurations), enabling clean cable routing and precise throttle response. Textured aluminum finish delivers a refined motorsport-grade aesthetic while the anodized surface ensures long-term corrosion resistance under sustained engine bay heat exposure.

Features:

• Premium 6061 aircraft-grade billet aluminum construction – delivers exceptional strength while keeping weight low for performance K-swap builds
• CNC machined precision – ensures accurate dimensional fitment to K-series throttle body and chassis throttle cable mounting points
• Anodized surface finish – delivers superior rust and corrosion resistance for sustained engine bay heat exposure
• Textured aluminum surface – refined motorsport-grade aesthetic that complements clean K-swap engine bay builds
• Direct K-series throttle body fitment – designed specifically for K-series throttle bodies with throttle wheel on the right side (engine-facing)
• Compatible with 84cm (33.07") sized throttle cables – verify your cable length matches before installation
• Includes mounting hardware – complete kit ready for installation without sourcing additional fasteners
• Direct factory throttle cable bracket replacement – essential K-swap supporting hardware

Specifications:

• Condition: 100% Brand New
• Type: K-Series Throttle Cable Bracket
• Material: 6061 Aircraft-Grade Billet Aluminum
• Construction: CNC Machined
• Surface Finish: Anodized (Textured)
• Item Weight: 0.12 kg
• Recommended Throttle Cable Length: 84cm (33.07")
• Quantity: 1 bracket per pack with mounting hardware
• Position: Throttle Cable Mounting
• Engine Compatibility: Honda K-Series (K20 / K24 family)
• Purpose: Engine Swap Component / Throttle Cable Routing

Critical Compatibility Notes:

• Throttle body orientation: Only works with throttle bodies featuring the throttle wheel on the right side (closest to the engine). Does NOT fit base RSX throttle bodies
• OEM-style throttle body compatibility: Specifically works with 2002-2006 RSX Type-S throttle bodies and USDM/CDM EP3 Civic Si throttle bodies. Does NOT fit base RSX throttle bodies
• Throttle cable sizing: Use a properly sized 84cm (33.07") throttle cable for correct routing and engagement
• Left-hand drive only: Designed for left-hand drive vehicle applications only

Fitment:

• Honda Civic (1988 – 2005) – LHD K-swap applications
• Acura Integra (1990 – 2001) – LHD K-swap applications
• Acura RSX (2002 – 2006) – LHD K-swap applications
• Compatible with K-series engine swap projects using compatible throttle body configurations
• Confirm vehicle model, swap configuration, and throttle body type before ordering

Contents:

• 1x Billet Aluminum K-Series Throttle Cable Bracket
• All necessary mounting hardware included

Benefits:

• Enables proper K-series throttle cable routing on K-swap builds – the factory throttle cable brackets from older B-series and D-series engines don't align with K-series throttle body geometry
• Restores precise throttle response on swap builds – proper cable routing ensures consistent throttle engagement without binding or sticking
• 6061 aircraft-grade billet aluminum construction permanently outlasts factory components and provides clean appearance for serious engine bay aesthetics
• Anodized finish maintains its appearance over years of engine bay heat exposure without fading or corrosion
• Textured aluminum finish delivers refined motorsport-grade aesthetic for show-quality engine bay builds
• CNC machined precision ensures clean professional installation without modification or fabrication
• Critical engine swap supporting hardware – essential for any K-swap project where proper throttle response matters
• Significant cost savings compared to fabricating custom brackets – this purpose-built bracket eliminates one-off fabrication work
• Wide chassis compatibility makes this versatile for K-swap builders working on multiple Honda platforms

Installation Notes:

• Throttle body verification required: Confirm your K-series throttle body is from a 2002-2006 RSX Type-S or EP3 Civic Si (USDM/CDM) before ordering – this bracket does NOT fit base RSX throttle bodies which use a different throttle wheel orientation
• Throttle cable sizing: Source a 84cm (33.07") throttle cable for proper routing and engagement – cables of incorrect length will not enable proper throttle operation
• LHD only: Verify your vehicle is left-hand drive before ordering – RHD applications are not compatible
• Disconnect the negative battery terminal before beginning installation to prevent electrical issues during throttle body service
• Plan complete throttle cable routing from pedal through bracket to throttle body before installation – verify clearance from heat sources, moving components, and pinch points
• Position the bracket for proper alignment with both the chassis throttle cable mounting point and the K-series throttle body cable receiver
• Install the bracket using the included mounting hardware – tighten to manufacturer-specified torque values
• Route the throttle cable through the bracket and connect to the K-series throttle body cable receiver
• Verify smooth throttle operation through full pedal travel before starting the engine – check for binding, sticking, or incomplete return to closed position
• Reconnect battery and test throttle response at idle before driving
• Test full RPM range operation at low speeds before aggressive driving
• Inspect bracket and cable mounting periodically for any signs of loosening or wear from sustained engine vibration
• Professional installation strongly recommended unless you have experience with K-series engine swap procedures
• If unsure about compatibility with your specific K-swap configuration, contact our team with your chassis, throttle body source, and intended throttle cable specification before ordering

Warranty:

• 12-month standard warranty from date of purchase
• Contact our support team for assistance with any issues

Warranty Assurance:

At K2 Industries, your satisfaction is our priority, and we stand behind the quality of our products. Here's a brief overview of our warranty:

Defect Coverage:
If you find a defect after receiving your order, get in touch with us. We're committed to resolving the issue, whether it involves a replacement, repair, or refund.

Installation Note:
Please inspect your purchase before installation. Unfortunately, damages post-installation are not covered, so ensure everything looks good beforehand.

Claims Made Simple:
Need to make a claim? Reach out to us at support@k2-industries.com. We're here to assist you. Just keep your original packaging and documentation handy.

Your Satisfaction Matters:
Your trust in K2 Industries is appreciated. We're dedicated to ensuring your satisfaction with our quality automotive parts.

Shipping Information:

At K2 Industries, we strive to provide a seamless and efficient shopping experience for automotive enthusiasts like you. Our commitment is to deliver high-quality parts to your doorstep with the utmost care.

Fast and Reliable Shipping:
Many of our products are stocked in our local warehouse, ensuring swift processing and delivery. Orders placed for these items typically ship within 2-5 business days, allowing you to get your parts in no time.

Extended Selection, Global Reach:
To offer you a broader range of automotive parts, some items are sourced from trusted suppliers around the world. While these products might have a slightly longer processing time, we assure you that the wait is worth it for the exceptional quality and value they bring.

Shipping Transparency:
For products shipped internationally, we provide estimated delivery times on the product page. Rest assured, we are continually working to optimize our supply chain and minimize any potential delays.

Combined Shipments:
To streamline your shopping experience, if your order includes items from both our local warehouse and international suppliers, they may be shipped separately. You will receive separate tracking information for each shipment.

Questions or Concerns?
If you have any questions about shipping or would like assistance tracking your order, our dedicated customer support team is here to help. Feel free to reach out to us at support@k2-industries.com.

You can also track your order here

Thank you for choosing K2 Industries for your automotive needs. We appreciate your trust in us.