Version 1L Tail Light Overlays - 2021+ Bronco (w/ LED Taillights)
- Tail light overlays for the 2021+ Ford Bronco with LED taillights — covers the turn signal portion only
- Not compatible with halogen taillights — LED tails only
- Sold as a left and right pair
- 9 material options: plain smoked, LX+ air-egress, Stealth matte, Honeycomb, Carbon Fiber, and Galaxy
- Made to order by StickerFab in Fort Myers, FL
Version 1L Tail Light Overlays — 2021+ Ford Bronco (LED Taillights)
The Version 1L covers the turn signal portion of the LED tail lights on the 2021+ Ford Bronco, giving the tails a smoked, tinted, or patterned appearance with or without the lights on. This was a user-submitted design that quickly became one of our most popular Bronco overlays — we think it was done right the first time. Sold as a left/right pair, precision cut for the Bronco's LED tail light configuration.
Important: These overlays are designed for the LED taillights only. They are not compatible with the halogen tail light version. Check your Bronco's tail light type before ordering.
Material Options
- Dark Smoke — standard dark smoke tint. Clean, classic smoked look. Made in Germany.
- Dark Smoke LX+ — premium dark smoke with air-egress channels (helps eliminate bubbles during install). Made in the USA.
- Light Smoke — lighter tint for a subtle tone-down without going full dark. Made in Germany.
- Light Smoke LX+ — premium light smoke with air-egress channels. Made in the USA.
- Dark Smoke Stealth — premium dark smoke in a matte finish with air-egress channels. Eliminates the gloss look entirely. Made in the USA.
- Light Smoke Stealth — premium light smoke in a matte finish with air-egress channels. Made in the USA.
- Dark Smoke Honeycomb — dark smoke with a honeycomb pattern visible when the lights are on. Air-egress channels. Made in the USA.
- Dark Smoke Carbon Fiber — dark smoke with carbon fiber texture visible when lit. Air-egress channels. Made in the USA.
- Dark Smoke Galaxy — dark smoke loaded with metallic flake that catches light when illuminated. Appears similar to standard dark smoke when backlit from behind. Air-egress channels. Made in the USA.
LX+ and air-egress channel materials have micro-channels cut into the adhesive side that allow air to escape during installation — significantly easier to apply without bubbles, especially on the first attempt.
Installation
Orientation tip: You can tell driver from passenger side by the angled design on the bottom of each overlay.
What you'll need:
- Wax-free detailer spray or glass cleaner + microfiber towel
- StickerFab Application Fluid (recommended) or soapy water (a few drops of dish soap in 1-2 cups of water)
- Felt-lined squeegee (optional but helpful)
- Heat gun or hair dryer (optional)
Clean the tail light surface thoroughly — no wax-based products. Wet install is recommended: spray the adhesive side of the vinyl with application fluid or soapy water, position the overlay on the tail light, slide into alignment, then squeegee from center outward to push out the fluid. Allow to dry fully before driving.
Fitment
Fits: 2021+ Ford Bronco — LED taillights only (all trims with factory LED tails). Does not fit halogen taillights.
FAQ
How do I know if my Bronco has LED or halogen taillights?
LED taillights have a distinct segmented LED light bar design. Halogen tails have a conventional round/oval bulb visible through the lens. If you're unsure, check your Bronco's window sticker or compare to product photos.
Will the overlay affect brake light brightness?
Dark Smoke will reduce apparent brightness somewhat — this is expected and common with any smoked tail light treatment. Light Smoke has minimal impact. These overlays comply with general use; always ensure your lights remain visible to other drivers.
What's the difference between Dark Smoke and Dark Smoke Stealth?
Dark Smoke has a gloss finish; Dark Smoke Stealth has a matte finish. If you're running a flat or satin exterior, Stealth blends in better. Both are the same level of tint darkness.
Do the patterned options (Honeycomb, Carbon Fiber, Galaxy) look good when the lights are off?
When the lights are off, all three appear as a standard dark smoke tint — the pattern becomes visible when the LEDs illuminate from behind. Galaxy is the exception; it retains a subtle metallic sheen even when unlit.
Are these easy to remove?
Yes — apply mild heat and peel slowly. No adhesive residue remains on clean, properly prepared surfaces.
- Tail light overlays for the 2021+ Ford Bronco with LED taillights — covers the turn signal portion only
- Not compatible with halogen taillights — LED tails only
- Sold as a left and right pair
- 9 material options: plain smoked, LX+ air-egress, Stealth matte, Honeycomb, Carbon Fiber, and Galaxy
- Made to order by StickerFab in Fort Myers, FL
Version 1L Tail Light Overlays — 2021+ Ford Bronco (LED Taillights)
The Version 1L covers the turn signal portion of the LED tail lights on the 2021+ Ford Bronco, giving the tails a smoked, tinted, or patterned appearance with or without the lights on. This was a user-submitted design that quickly became one of our most popular Bronco overlays — we think it was done right the first time. Sold as a left/right pair, precision cut for the Bronco's LED tail light configuration.
Important: These overlays are designed for the LED taillights only. They are not compatible with the halogen tail light version. Check your Bronco's tail light type before ordering.
Material Options
- Dark Smoke — standard dark smoke tint. Clean, classic smoked look. Made in Germany.
- Dark Smoke LX+ — premium dark smoke with air-egress channels (helps eliminate bubbles during install). Made in the USA.
- Light Smoke — lighter tint for a subtle tone-down without going full dark. Made in Germany.
- Light Smoke LX+ — premium light smoke with air-egress channels. Made in the USA.
- Dark Smoke Stealth — premium dark smoke in a matte finish with air-egress channels. Eliminates the gloss look entirely. Made in the USA.
- Light Smoke Stealth — premium light smoke in a matte finish with air-egress channels. Made in the USA.
- Dark Smoke Honeycomb — dark smoke with a honeycomb pattern visible when the lights are on. Air-egress channels. Made in the USA.
- Dark Smoke Carbon Fiber — dark smoke with carbon fiber texture visible when lit. Air-egress channels. Made in the USA.
- Dark Smoke Galaxy — dark smoke loaded with metallic flake that catches light when illuminated. Appears similar to standard dark smoke when backlit from behind. Air-egress channels. Made in the USA.
LX+ and air-egress channel materials have micro-channels cut into the adhesive side that allow air to escape during installation — significantly easier to apply without bubbles, especially on the first attempt.
Installation
Orientation tip: You can tell driver from passenger side by the angled design on the bottom of each overlay.
What you'll need:
- Wax-free detailer spray or glass cleaner + microfiber towel
- StickerFab Application Fluid (recommended) or soapy water (a few drops of dish soap in 1-2 cups of water)
- Felt-lined squeegee (optional but helpful)
- Heat gun or hair dryer (optional)
Clean the tail light surface thoroughly — no wax-based products. Wet install is recommended: spray the adhesive side of the vinyl with application fluid or soapy water, position the overlay on the tail light, slide into alignment, then squeegee from center outward to push out the fluid. Allow to dry fully before driving.
Fitment
Fits: 2021+ Ford Bronco — LED taillights only (all trims with factory LED tails). Does not fit halogen taillights.
FAQ
How do I know if my Bronco has LED or halogen taillights?
LED taillights have a distinct segmented LED light bar design. Halogen tails have a conventional round/oval bulb visible through the lens. If you're unsure, check your Bronco's window sticker or compare to product photos.
Will the overlay affect brake light brightness?
Dark Smoke will reduce apparent brightness somewhat — this is expected and common with any smoked tail light treatment. Light Smoke has minimal impact. These overlays comply with general use; always ensure your lights remain visible to other drivers.
What's the difference between Dark Smoke and Dark Smoke Stealth?
Dark Smoke has a gloss finish; Dark Smoke Stealth has a matte finish. If you're running a flat or satin exterior, Stealth blends in better. Both are the same level of tint darkness.
Do the patterned options (Honeycomb, Carbon Fiber, Galaxy) look good when the lights are off?
When the lights are off, all three appear as a standard dark smoke tint — the pattern becomes visible when the LEDs illuminate from behind. Galaxy is the exception; it retains a subtle metallic sheen even when unlit.
Are these easy to remove?
Yes — apply mild heat and peel slowly. No adhesive residue remains on clean, properly prepared surfaces.
- Fitment verified for YOUR exact year/model/trim
- Not sure? Call +1 772-277-2495 for a real specialist to help you order
- Got install questions? Text a tech who's actually installed this part before, even after it arrives
FREE Shipping
Select your exact model and see if this part fits
Version 1L Tail Light Overlays - 2021+ Bronco (w/ LED Taillights) - Dark Smoke is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Wrong fit or arrives damaged? Free replacement or refund
30,000+ Happy Customers
30-Day Returns
One Year Warranty
Details
Details
- Tail light overlays for the 2021+ Ford Bronco with LED taillights — covers the turn signal portion only
- Not compatible with halogen taillights — LED tails only
- Sold as a left and right pair
- 9 material options: plain smoked, LX+ air-egress, Stealth matte, Honeycomb, Carbon Fiber, and Galaxy
- Made to order by StickerFab in Fort Myers, FL
Version 1L Tail Light Overlays — 2021+ Ford Bronco (LED Taillights)
The Version 1L covers the turn signal portion of the LED tail lights on the 2021+ Ford Bronco, giving the tails a smoked, tinted, or patterned appearance with or without the lights on. This was a user-submitted design that quickly became one of our most popular Bronco overlays — we think it was done right the first time. Sold as a left/right pair, precision cut for the Bronco's LED tail light configuration.
Important: These overlays are designed for the LED taillights only. They are not compatible with the halogen tail light version. Check your Bronco's tail light type before ordering.
Material Options
- Dark Smoke — standard dark smoke tint. Clean, classic smoked look. Made in Germany.
- Dark Smoke LX+ — premium dark smoke with air-egress channels (helps eliminate bubbles during install). Made in the USA.
- Light Smoke — lighter tint for a subtle tone-down without going full dark. Made in Germany.
- Light Smoke LX+ — premium light smoke with air-egress channels. Made in the USA.
- Dark Smoke Stealth — premium dark smoke in a matte finish with air-egress channels. Eliminates the gloss look entirely. Made in the USA.
- Light Smoke Stealth — premium light smoke in a matte finish with air-egress channels. Made in the USA.
- Dark Smoke Honeycomb — dark smoke with a honeycomb pattern visible when the lights are on. Air-egress channels. Made in the USA.
- Dark Smoke Carbon Fiber — dark smoke with carbon fiber texture visible when lit. Air-egress channels. Made in the USA.
- Dark Smoke Galaxy — dark smoke loaded with metallic flake that catches light when illuminated. Appears similar to standard dark smoke when backlit from behind. Air-egress channels. Made in the USA.
LX+ and air-egress channel materials have micro-channels cut into the adhesive side that allow air to escape during installation — significantly easier to apply without bubbles, especially on the first attempt.
Installation
Orientation tip: You can tell driver from passenger side by the angled design on the bottom of each overlay.
What you'll need:
- Wax-free detailer spray or glass cleaner + microfiber towel
- StickerFab Application Fluid (recommended) or soapy water (a few drops of dish soap in 1-2 cups of water)
- Felt-lined squeegee (optional but helpful)
- Heat gun or hair dryer (optional)
Clean the tail light surface thoroughly — no wax-based products. Wet install is recommended: spray the adhesive side of the vinyl with application fluid or soapy water, position the overlay on the tail light, slide into alignment, then squeegee from center outward to push out the fluid. Allow to dry fully before driving.
Fitment
Fits: 2021+ Ford Bronco — LED taillights only (all trims with factory LED tails). Does not fit halogen taillights.
FAQ
How do I know if my Bronco has LED or halogen taillights?
LED taillights have a distinct segmented LED light bar design. Halogen tails have a conventional round/oval bulb visible through the lens. If you're unsure, check your Bronco's window sticker or compare to product photos.
Will the overlay affect brake light brightness?
Dark Smoke will reduce apparent brightness somewhat — this is expected and common with any smoked tail light treatment. Light Smoke has minimal impact. These overlays comply with general use; always ensure your lights remain visible to other drivers.
What's the difference between Dark Smoke and Dark Smoke Stealth?
Dark Smoke has a gloss finish; Dark Smoke Stealth has a matte finish. If you're running a flat or satin exterior, Stealth blends in better. Both are the same level of tint darkness.
Do the patterned options (Honeycomb, Carbon Fiber, Galaxy) look good when the lights are off?
When the lights are off, all three appear as a standard dark smoke tint — the pattern becomes visible when the LEDs illuminate from behind. Galaxy is the exception; it retains a subtle metallic sheen even when unlit.
Are these easy to remove?
Yes — apply mild heat and peel slowly. No adhesive residue remains on clean, properly prepared surfaces.
Fitment
Fitment
Our Guarantee
Our Guarantee
Warranty Assurance:
At K2 Industries, your satisfaction is our priority, and we stand behind the quality of our products. Here's a brief overview of our warranty:
Defect Coverage:
If you find a defect after receiving your order, get in touch with us. We're committed to resolving the issue, whether it involves a replacement, repair, or refund.
Installation Note:
Please inspect your purchase before installation. Unfortunately, damages post-installation are not covered, so ensure everything looks good beforehand.
Claims Made Simple:
Need to make a claim? Reach out to us at support@k2-industries.com. We're here to assist you. Just keep your original packaging and documentation handy.
Your Satisfaction Matters:
Your trust in K2 Industries is appreciated. We're dedicated to ensuring your satisfaction with our quality automotive parts.
Shipping & Returns
Shipping & Returns
Shipping Information:
At K2 Industries, we strive to provide a seamless and efficient shopping experience for automotive enthusiasts like you. Our commitment is to deliver high-quality parts to your doorstep with the utmost care.
Fast and Reliable Shipping:
Many of our products are stocked in our local warehouse, ensuring swift processing and delivery. Orders placed for these items typically ship within 2-5 business days, allowing you to get your parts in no time.
Extended Selection, Global Reach:
To offer you a broader range of automotive parts, some items are sourced from trusted suppliers around the world. While these products might have a slightly longer processing time, we assure you that the wait is worth it for the exceptional quality and value they bring.
Shipping Transparency:
For products shipped internationally, we provide estimated delivery times on the product page. Rest assured, we are continually working to optimize our supply chain and minimize any potential delays.
Combined Shipments:
To streamline your shopping experience, if your order includes items from both our local warehouse and international suppliers, they may be shipped separately. You will receive separate tracking information for each shipment.
Questions or Concerns?
If you have any questions about shipping or would like assistance tracking your order, our dedicated customer support team is here to help. Feel free to reach out to us at support@k2-industries.com.
You can also track your order here
Thank you for choosing K2 Industries for your automotive needs. We appreciate your trust in us.
FAQs
Are these plug-and-play?
Most of our tail lights connect to your factory wiring without modification. The exact install type is in the spec sheet — if anything beyond direct plug-in is needed, we say so upfront.
Will I get a dashboard error after installing?
Some CAN-bus vehicles (commonly BMW, Audi, certain Euro models) may show a "tail light malfunction" error when LED tail lights replace OEM bulbs. The fix is usually a load resistor or quick coding step — we'll walk you through it if it happens.
Are these street-legal?
Most of our tail lights are designed for street use and meet standard automotive lighting requirements. A small number are sold for off-road or show use only — and when that's the case, we say so clearly.
What if a tail light stops working after install?
Most tail lights are covered by manufacturer warranty for at least 12 months against LED failure and wiring defects. Email support@k2-industries.com with your order number and photos — we handle the warranty claim and get you a replacement.
Version 1L Tail Light Overlays - 2021+ Bronco (w/ LED Taillights)
The K2 Difference
- • Built by enthusiasts who've made every fitment mistake you're afraid of. Now we verify parts for 30,000+ builds a year with zero wrong-part claims.
- • Real specialists answer your questions in minutes, not chatbots reading scripts. We've built the same cars you're building.
- • Freight damage, wrong parts, installation question, we handle it so you don't deal with suppliers or shipping companies.
Built By Someone Who's Been There
Max, the Owner, started in his garage making E36 M3 tail lights in his own oven.
- • Started modifying cars before he could legally drive them
- • Spent years hunting down parts that actually fit and don't suck
- • Made the same fitment mistakes you're afraid of
What You Get With Every Order
What Sets K2 Industries Apart?
Perfect fit guaranteedFrequently Asked Questions
How do I know this will actually fit my car?
How do I know this will actually fit my car?
Every part listing shows compatible years, models, and trims. But here's the thing—trim packages and factory options can be confusing. If you're not 100% certain, text us at 772-277-2495 with your VIN or photos of your car. We'll verify fitment before you order so you're not stuck with an $800 part that doesn't fit. We've done this for 30,000+ builds. We've seen every weird trim combo and factory option. Takes us 2 minutes to verify, saves you weeks of headaches.
What if the part arrives damaged or is the wrong item?
What if the part arrives damaged or is the wrong item?
We handle it. You don't fight with freight companies or file claims. Text us photos within 48 hours of delivery. If it's damaged or wrong, we ship a replacement immediately. You're not waiting 6 weeks for a freight claim to process. We eat the cost, not you. This is why we package everything like it's going to war. But if something slips through, we fix it ASAP. No forms, no back-and-forth, no "file a claim and wait." Just text us and we handle it.
Can I install this myself or do I need a shop?
Can I install this myself or do I need a shop?
Depends on the part. Emblems, front lips, some spoilers, bolt-on, DIY-friendly, you can do it in your driveway with basic tools. Full bumpers, hoods, wide-body kits, possible for experienced DIYers but most people take them to a shop for paint and install. Check the product description for installation difficulty. If you're unsure, text us. We'll be honest about whether you can handle it or if you should take it to a pro. We'd rather you know upfront than get frustrated halfway through.
What's your return policy if it doesn't fit or I don't like it?
What's your return policy if it doesn't fit or I don't like it?
30 days, unused parts in original packaging. You pay return shipping unless we sent the wrong part or it arrived defective. Once you install it, modify it, paint it, or mount it, we can't take it back. That's why we push so hard on verifying fitment BEFORE you order. We don't want you stuck with something you can't use. Text us before ordering if you're unsure. We'll confirm fitment so you never have to worry about returns.
Do you offer financing?
Do you offer financing?
Yes. Affirm and Shop Pay available at checkout for orders over $50. Split payments over 3-12 months depending on order size. No hard credit check to see your options. Most people use this for big-ticket items like body kits, suspension setups, or wheel/tire packages. Rates vary based on credit. You see the monthly payment before you commit. Makes it easier to build now instead of waiting months to save up.
What if I have questions after I receive the part?
What if I have questions after I receive the part?
Text 772-277-2495. We don't disappear after you buy. Fitment questions, installation issues, "does this bolt go here" questions... we'll walk you through it. We've installed these parts ourselves or helped hundreds of people install them. You're not getting transferred to a call center in the Philippines. You're texting someone who's actually installed your part before. If we can't help remotely, we'll recommend a local shop that knows these parts.
Why should I buy from K2 instead of eBay/Amazon/other sites?
Why should I buy from K2 instead of eBay/Amazon/other sites?
eBay and Amazon sellers don't answer fitment questions. They don't verify your VIN before shipping. They don't handle freight damage claims for you. If something goes wrong, you're filing disputes and waiting weeks. We're builders selling to builders. We verify fitment before you order. We handle damage claims same-day. We answer texts in minutes. We're not the cheapest, but you're not gambling $800 on whether a part fits. You're paying for support, verification, and someone who cares if your build goes sideways.
What does your warranty cover?
What does your warranty cover?
1 year against manufacturing defects: cracking, warping, paint peeling, hardware failure, fitment issues caused by the part being made wrong. Does NOT cover installation damage (you cracked it bolting it on), road damage (curb rash, rock chips), or normal wear. If it breaks because we made it wrong, we replace it free. If it breaks because you hit a parking block, that's on you. We're fair about it. Send photos and we'll tell you honestly if it's covered.
Shipping
Do you ship overseas?
Do you ship overseas?
Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.
How much does shipping cost and when will I see the total?
How much does shipping cost and when will I see the total?
Depending on where you're located, small parts can ship free. Large parts like bumpers, hoods, and body kits require freight shipping. Uou'll see the exact cost at checkout before you pay. Freight usually runs $150-$300 depending on size and your location. We know it's expensive. We negotiate the best rates we can. If you're ordering multiple large parts, text us. We can sometimes combine shipping and save you money. We're not hiding fees in the final step. What you see at checkout is what you pay.
How long will it take to receive my order?
How long will it take to receive my order?
It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.
