Porsche 971 Panamera Turbo / GTS Valvetronic Exhaust System - Yonristic Performance
At the core of this system is a true performance-driven architecture designed specifically around the airflow demands and firing order of Porsche’s 4.0L V8. From the inlet to the rear section, the exhaust uses a carefully optimized layout that minimizes turbulence and pressure buildup while maintaining exhaust gas velocity. The internal flow path is engineered to enhance scavenging and balance pressure waves between banks, resulting in a sharper throttle response and a smoother, more linear power delivery across the rev range.
The system incorporates an active valved rear section, allowing the exhaust to operate in two distinct personalities. With the valves closed, exhaust gases are routed through a tuned internal path that suppresses drone and unwanted resonance, keeping the cabin refined during highway cruising and daily use. Open the valves, and the flow transitions to a more direct, straight-through path—unlocking maximum volume, aggressive overrun character, and a high-energy, exotic V8 tone that builds cleanly with RPM rather than breaking into harshness.
Every component is hand-built and TIG-welded, using casted transitions and collectors where necessary to ensure smooth internal geometry and consistent wall thickness. The system is designed using underbody scan data to maintain perfect clearance, OEM-style mounting points, and a true bolt-on installation with no cutting or welding required. Whether paired with a stock vehicle or a tuned setup, this exhaust provides the airflow headroom and acoustic control demanded by high-output Panamera builds.
Porsche 971 Panamera exhaust Upgrade for Sound and Performance
When installed on an otherwise stock Porsche 971 Panamera Turbo or GTS, owners can expect measurable performance improvements due to reduced backpressure and improved exhaust flow efficiency:
-
Horsepower Gain:
+22–30 HP at higher RPM -
Torque Gain:
+20–28 lb-ft, particularly noticeable in mid-range acceleration -
Throttle Response:
Sharper turbo response and improved transient boost recovery
With ECU tuning, these gains can increase further, as the engine is able to fully take advantage of the reduced exhaust restriction and improved thermal efficiency.
Key Specifications
Configuration
-
Performance cat-back exhaust system
-
Optimized internal flow architecture for 4.0L twin-turbo V8
-
Active valved rear section with dual flow paths
Valve Control
-
Factory drive-mode valve integration supported
-
Included remote valve control module for independent on-demand operation
-
Seamless switching between quiet and aggressive modes
Materials & Construction
-
Available in AISI 304 Stainless Steel or 4AL-6V (Grade 5) Titanium
-
Fully TIG-welded, hand-finished construction
-
Casted collectors and transitions for optimal internal airflow
-
Heat-resistant design for sustained high-load driving
Tips
-
Quad-tip configuration
-
Optional finishes available (depending on build spec)
Installation
-
100% bolt-on installation
-
Uses OEM mounting points
-
No cutting, welding, or permanent modification required
Vehicle Fitment
-
Porsche Panamera Turbo (971) – 2017+
-
Porsche Panamera Turbo Sport Turismo (971) – 2017+
-
Porsche Panamera GTS (971) – 2019+
-
Porsche Panamera GTS Sport Turismo (971) – 2019+
-
Engine: 4.0L Twin-Turbo V8
Why This Exhaust Is Different — Three Unique Points
1. Factory Integration + Remote Freedom
Unlike systems that force you to choose one or the other, this exhaust supports both OEM drive-mode valve control and an included remote valve system, giving you total authority over sound behavior at any time.
2. Engineered, Not Just Loud
The internal layout is designed to control pressure waves and flow, delivering a clean, exotic V8 tone without rasp or drone—especially critical for a long-wheelbase performance sedan like the Panamera.
3. Premium Materials, No Compromises
Choose between AISI 304 stainless steel for durability or 4AL-6V titanium for maximum weight reduction and sharper acoustics, with every unit hand-built and casted where it matters most.
Built for the 971 Panamera Turbo and GTS
The Porsche 971 Panamera exhaust system from Yonristic Performance is designed for drivers who want stronger sound, sharper response, and a premium fit. Made for the Panamera Turbo and GTS, this valvetronic setup brings out the character of the 971 chassis without losing everyday comfort. It gives you the ability to enjoy a quiet, refined drive when needed, then open the valves for a deeper, more aggressive exhaust note. This product is a smart upgrade for owners who want both performance style and controlled sound in one system.
Valved Control for Daily Driving Flexibility
One of the main benefits of this Porsche 971 Panamera exhaust is its valvetronic design. The valve system allows the driver to switch between a calm street mode and a louder performance mode, depending on road conditions and personal preference. This makes it ideal for daily use, long trips, and spirited driving. When the valves are open, exhaust flow improves and the sound becomes more exciting and more responsive. When closed, the system helps maintain a comfortable cabin experience, which is especially important in a luxury performance sedan like the Panamera.
Performance Sound with Refined Engineering
Yonristic Performance focuses on delivering an exhaust that feels as good as it sounds. This Porsche 971 Panamera exhaust is engineered to improve exhaust flow while keeping a clean, high-quality finish that matches the vehicle’s premium design. The result is a more confident driving feel and a richer exhaust tone that fits the Turbo and GTS character. It is built for enthusiasts who want an upgrade that enhances the car’s presence without looking out of place. With careful attention to fitment and sound tuning, this system adds excitement while still respecting the Panamera’s luxury identity.
A Premium Upgrade for Enthusiasts
For Panamera owners looking to make a meaningful change, this exhaust system offers a balanced mix of style, sound, and function. It is an excellent choice for drivers who want their Porsche to feel more alive on startup, under acceleration, and during high-performance driving. The valvetronic feature makes it practical, while the performance-focused design makes it rewarding every time you drive. If you are searching for a Porsche 971 Panamera exhaust that delivers a more aggressive sound profile and a refined driving experience, Yonristic Performance offers a solution made for true Porsche enthusiasts.
At the core of this system is a true performance-driven architecture designed specifically around the airflow demands and firing order of Porsche’s 4.0L V8. From the inlet to the rear section, the exhaust uses a carefully optimized layout that minimizes turbulence and pressure buildup while maintaining exhaust gas velocity. The internal flow path is engineered to enhance scavenging and balance pressure waves between banks, resulting in a sharper throttle response and a smoother, more linear power delivery across the rev range.
The system incorporates an active valved rear section, allowing the exhaust to operate in two distinct personalities. With the valves closed, exhaust gases are routed through a tuned internal path that suppresses drone and unwanted resonance, keeping the cabin refined during highway cruising and daily use. Open the valves, and the flow transitions to a more direct, straight-through path—unlocking maximum volume, aggressive overrun character, and a high-energy, exotic V8 tone that builds cleanly with RPM rather than breaking into harshness.
Every component is hand-built and TIG-welded, using casted transitions and collectors where necessary to ensure smooth internal geometry and consistent wall thickness. The system is designed using underbody scan data to maintain perfect clearance, OEM-style mounting points, and a true bolt-on installation with no cutting or welding required. Whether paired with a stock vehicle or a tuned setup, this exhaust provides the airflow headroom and acoustic control demanded by high-output Panamera builds.
Porsche 971 Panamera exhaust Upgrade for Sound and Performance
When installed on an otherwise stock Porsche 971 Panamera Turbo or GTS, owners can expect measurable performance improvements due to reduced backpressure and improved exhaust flow efficiency:
-
Horsepower Gain:
+22–30 HP at higher RPM -
Torque Gain:
+20–28 lb-ft, particularly noticeable in mid-range acceleration -
Throttle Response:
Sharper turbo response and improved transient boost recovery
With ECU tuning, these gains can increase further, as the engine is able to fully take advantage of the reduced exhaust restriction and improved thermal efficiency.
Key Specifications
Configuration
-
Performance cat-back exhaust system
-
Optimized internal flow architecture for 4.0L twin-turbo V8
-
Active valved rear section with dual flow paths
Valve Control
-
Factory drive-mode valve integration supported
-
Included remote valve control module for independent on-demand operation
-
Seamless switching between quiet and aggressive modes
Materials & Construction
-
Available in AISI 304 Stainless Steel or 4AL-6V (Grade 5) Titanium
-
Fully TIG-welded, hand-finished construction
-
Casted collectors and transitions for optimal internal airflow
-
Heat-resistant design for sustained high-load driving
Tips
-
Quad-tip configuration
-
Optional finishes available (depending on build spec)
Installation
-
100% bolt-on installation
-
Uses OEM mounting points
-
No cutting, welding, or permanent modification required
Vehicle Fitment
-
Porsche Panamera Turbo (971) – 2017+
-
Porsche Panamera Turbo Sport Turismo (971) – 2017+
-
Porsche Panamera GTS (971) – 2019+
-
Porsche Panamera GTS Sport Turismo (971) – 2019+
-
Engine: 4.0L Twin-Turbo V8
Why This Exhaust Is Different — Three Unique Points
1. Factory Integration + Remote Freedom
Unlike systems that force you to choose one or the other, this exhaust supports both OEM drive-mode valve control and an included remote valve system, giving you total authority over sound behavior at any time.
2. Engineered, Not Just Loud
The internal layout is designed to control pressure waves and flow, delivering a clean, exotic V8 tone without rasp or drone—especially critical for a long-wheelbase performance sedan like the Panamera.
3. Premium Materials, No Compromises
Choose between AISI 304 stainless steel for durability or 4AL-6V titanium for maximum weight reduction and sharper acoustics, with every unit hand-built and casted where it matters most.
Built for the 971 Panamera Turbo and GTS
The Porsche 971 Panamera exhaust system from Yonristic Performance is designed for drivers who want stronger sound, sharper response, and a premium fit. Made for the Panamera Turbo and GTS, this valvetronic setup brings out the character of the 971 chassis without losing everyday comfort. It gives you the ability to enjoy a quiet, refined drive when needed, then open the valves for a deeper, more aggressive exhaust note. This product is a smart upgrade for owners who want both performance style and controlled sound in one system.
Valved Control for Daily Driving Flexibility
One of the main benefits of this Porsche 971 Panamera exhaust is its valvetronic design. The valve system allows the driver to switch between a calm street mode and a louder performance mode, depending on road conditions and personal preference. This makes it ideal for daily use, long trips, and spirited driving. When the valves are open, exhaust flow improves and the sound becomes more exciting and more responsive. When closed, the system helps maintain a comfortable cabin experience, which is especially important in a luxury performance sedan like the Panamera.
Performance Sound with Refined Engineering
Yonristic Performance focuses on delivering an exhaust that feels as good as it sounds. This Porsche 971 Panamera exhaust is engineered to improve exhaust flow while keeping a clean, high-quality finish that matches the vehicle’s premium design. The result is a more confident driving feel and a richer exhaust tone that fits the Turbo and GTS character. It is built for enthusiasts who want an upgrade that enhances the car’s presence without looking out of place. With careful attention to fitment and sound tuning, this system adds excitement while still respecting the Panamera’s luxury identity.
A Premium Upgrade for Enthusiasts
For Panamera owners looking to make a meaningful change, this exhaust system offers a balanced mix of style, sound, and function. It is an excellent choice for drivers who want their Porsche to feel more alive on startup, under acceleration, and during high-performance driving. The valvetronic feature makes it practical, while the performance-focused design makes it rewarding every time you drive. If you are searching for a Porsche 971 Panamera exhaust that delivers a more aggressive sound profile and a refined driving experience, Yonristic Performance offers a solution made for true Porsche enthusiasts.
- Fitment verified for YOUR exact year/model/trim
- Not sure? Call +1 772-277-2495 for a real specialist to help you order
- Got install questions? Text a tech who's actually installed this part before, even after it arrives
FREE Shipping
Select your exact model and see if this part fits
Porsche 971 Panamera Turbo / GTS Valvetronic Exhaust System - Yonristic Performance - Catback System / AISI304 Stainless Steel / (4) Chrome is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Wrong fit or arrives damaged? Free replacement or refund
30,000+ Happy Customers
30-Day Returns
One Year Warranty
Details
Details
At the core of this system is a true performance-driven architecture designed specifically around the airflow demands and firing order of Porsche’s 4.0L V8. From the inlet to the rear section, the exhaust uses a carefully optimized layout that minimizes turbulence and pressure buildup while maintaining exhaust gas velocity. The internal flow path is engineered to enhance scavenging and balance pressure waves between banks, resulting in a sharper throttle response and a smoother, more linear power delivery across the rev range.
The system incorporates an active valved rear section, allowing the exhaust to operate in two distinct personalities. With the valves closed, exhaust gases are routed through a tuned internal path that suppresses drone and unwanted resonance, keeping the cabin refined during highway cruising and daily use. Open the valves, and the flow transitions to a more direct, straight-through path—unlocking maximum volume, aggressive overrun character, and a high-energy, exotic V8 tone that builds cleanly with RPM rather than breaking into harshness.
Every component is hand-built and TIG-welded, using casted transitions and collectors where necessary to ensure smooth internal geometry and consistent wall thickness. The system is designed using underbody scan data to maintain perfect clearance, OEM-style mounting points, and a true bolt-on installation with no cutting or welding required. Whether paired with a stock vehicle or a tuned setup, this exhaust provides the airflow headroom and acoustic control demanded by high-output Panamera builds.
Porsche 971 Panamera exhaust Upgrade for Sound and Performance
When installed on an otherwise stock Porsche 971 Panamera Turbo or GTS, owners can expect measurable performance improvements due to reduced backpressure and improved exhaust flow efficiency:
-
Horsepower Gain:
+22–30 HP at higher RPM -
Torque Gain:
+20–28 lb-ft, particularly noticeable in mid-range acceleration -
Throttle Response:
Sharper turbo response and improved transient boost recovery
With ECU tuning, these gains can increase further, as the engine is able to fully take advantage of the reduced exhaust restriction and improved thermal efficiency.
Key Specifications
Configuration
-
Performance cat-back exhaust system
-
Optimized internal flow architecture for 4.0L twin-turbo V8
-
Active valved rear section with dual flow paths
Valve Control
-
Factory drive-mode valve integration supported
-
Included remote valve control module for independent on-demand operation
-
Seamless switching between quiet and aggressive modes
Materials & Construction
-
Available in AISI 304 Stainless Steel or 4AL-6V (Grade 5) Titanium
-
Fully TIG-welded, hand-finished construction
-
Casted collectors and transitions for optimal internal airflow
-
Heat-resistant design for sustained high-load driving
Tips
-
Quad-tip configuration
-
Optional finishes available (depending on build spec)
Installation
-
100% bolt-on installation
-
Uses OEM mounting points
-
No cutting, welding, or permanent modification required
Vehicle Fitment
-
Porsche Panamera Turbo (971) – 2017+
-
Porsche Panamera Turbo Sport Turismo (971) – 2017+
-
Porsche Panamera GTS (971) – 2019+
-
Porsche Panamera GTS Sport Turismo (971) – 2019+
-
Engine: 4.0L Twin-Turbo V8
Why This Exhaust Is Different — Three Unique Points
1. Factory Integration + Remote Freedom
Unlike systems that force you to choose one or the other, this exhaust supports both OEM drive-mode valve control and an included remote valve system, giving you total authority over sound behavior at any time.
2. Engineered, Not Just Loud
The internal layout is designed to control pressure waves and flow, delivering a clean, exotic V8 tone without rasp or drone—especially critical for a long-wheelbase performance sedan like the Panamera.
3. Premium Materials, No Compromises
Choose between AISI 304 stainless steel for durability or 4AL-6V titanium for maximum weight reduction and sharper acoustics, with every unit hand-built and casted where it matters most.
Built for the 971 Panamera Turbo and GTS
The Porsche 971 Panamera exhaust system from Yonristic Performance is designed for drivers who want stronger sound, sharper response, and a premium fit. Made for the Panamera Turbo and GTS, this valvetronic setup brings out the character of the 971 chassis without losing everyday comfort. It gives you the ability to enjoy a quiet, refined drive when needed, then open the valves for a deeper, more aggressive exhaust note. This product is a smart upgrade for owners who want both performance style and controlled sound in one system.
Valved Control for Daily Driving Flexibility
One of the main benefits of this Porsche 971 Panamera exhaust is its valvetronic design. The valve system allows the driver to switch between a calm street mode and a louder performance mode, depending on road conditions and personal preference. This makes it ideal for daily use, long trips, and spirited driving. When the valves are open, exhaust flow improves and the sound becomes more exciting and more responsive. When closed, the system helps maintain a comfortable cabin experience, which is especially important in a luxury performance sedan like the Panamera.
Performance Sound with Refined Engineering
Yonristic Performance focuses on delivering an exhaust that feels as good as it sounds. This Porsche 971 Panamera exhaust is engineered to improve exhaust flow while keeping a clean, high-quality finish that matches the vehicle’s premium design. The result is a more confident driving feel and a richer exhaust tone that fits the Turbo and GTS character. It is built for enthusiasts who want an upgrade that enhances the car’s presence without looking out of place. With careful attention to fitment and sound tuning, this system adds excitement while still respecting the Panamera’s luxury identity.
A Premium Upgrade for Enthusiasts
For Panamera owners looking to make a meaningful change, this exhaust system offers a balanced mix of style, sound, and function. It is an excellent choice for drivers who want their Porsche to feel more alive on startup, under acceleration, and during high-performance driving. The valvetronic feature makes it practical, while the performance-focused design makes it rewarding every time you drive. If you are searching for a Porsche 971 Panamera exhaust that delivers a more aggressive sound profile and a refined driving experience, Yonristic Performance offers a solution made for true Porsche enthusiasts.
Fitment
Fitment
Our Guarantee
Our Guarantee
Warranty Assurance:
At K2 Industries, your satisfaction is our priority, and we stand behind the quality of our products. Here's a brief overview of our warranty:
Defect Coverage:
If you find a defect after receiving your order, get in touch with us. We're committed to resolving the issue, whether it involves a replacement, repair, or refund.
Installation Note:
Please inspect your purchase before installation. Unfortunately, damages post-installation are not covered, so ensure everything looks good beforehand.
Claims Made Simple:
Need to make a claim? Reach out to us at support@k2-industries.com. We're here to assist you. Just keep your original packaging and documentation handy.
Your Satisfaction Matters:
Your trust in K2 Industries is appreciated. We're dedicated to ensuring your satisfaction with our quality automotive parts.
Shipping & Returns
Shipping & Returns
Shipping Information:
At K2 Industries, we strive to provide a seamless and efficient shopping experience for automotive enthusiasts like you. Our commitment is to deliver high-quality parts to your doorstep with the utmost care.
Fast and Reliable Shipping:
Many of our products are stocked in our local warehouse, ensuring swift processing and delivery. Orders placed for these items typically ship within 2-5 business days, allowing you to get your parts in no time.
Extended Selection, Global Reach:
To offer you a broader range of automotive parts, some items are sourced from trusted suppliers around the world. While these products might have a slightly longer processing time, we assure you that the wait is worth it for the exceptional quality and value they bring.
Shipping Transparency:
For products shipped internationally, we provide estimated delivery times on the product page. Rest assured, we are continually working to optimize our supply chain and minimize any potential delays.
Combined Shipments:
To streamline your shopping experience, if your order includes items from both our local warehouse and international suppliers, they may be shipped separately. You will receive separate tracking information for each shipment.
Questions or Concerns?
If you have any questions about shipping or would like assistance tracking your order, our dedicated customer support team is here to help. Feel free to reach out to us at support@k2-industries.com.
You can also track your order here
Thank you for choosing K2 Industries for your automotive needs. We appreciate your trust in us.
FAQs
Will this require a tune after installation?
Bolt-ons like exhaust tips, cat-backs, and basic intakes usually don't. Larger mods — turbo upgrades, supercharger kits, headers — typically need an ECU tune to run safely. The spec sheet indicates if tuning is recommended.
Is this part emissions / CARB compliant?
If you're in California or another CARB-regulated state, check the CARB status on this page before ordering. Many performance parts are off-road or competition use only — if so, we say it clearly.
Will installing this void my factory warranty?
Modifications can affect manufacturer warranty on related components only — not your entire warranty. The Magnuson-Moss Warranty Act protects you from blanket warranty voids. If warranty matters to you, talk to your dealer before installing.
Can I install this myself?
Depends on the part. Bolt-ons are DIY-friendly. Turbo upgrades, headers, and supercharger kits need a professional shop. The product description gives a difficulty estimate.
Porsche 971 Panamera Turbo / GTS Valvetronic Exhaust System - Yonri...
The K2 Difference
- • Built by enthusiasts who've made every fitment mistake you're afraid of. Now we verify parts for 30,000+ builds a year with zero wrong-part claims.
- • Real specialists answer your questions in minutes, not chatbots reading scripts. We've built the same cars you're building.
- • Freight damage, wrong parts, installation question, we handle it so you don't deal with suppliers or shipping companies.
Built By Someone Who's Been There
Max, the Owner, started in his garage making E36 M3 tail lights in his own oven.
- • Started modifying cars before he could legally drive them
- • Spent years hunting down parts that actually fit and don't suck
- • Made the same fitment mistakes you're afraid of
What You Get With Every Order
What Sets K2 Industries Apart?
Perfect fit guaranteedFrequently Asked Questions
How do I know this will actually fit my car?
How do I know this will actually fit my car?
Every part listing shows compatible years, models, and trims. But here's the thing—trim packages and factory options can be confusing. If you're not 100% certain, text us at 772-277-2495 with your VIN or photos of your car. We'll verify fitment before you order so you're not stuck with an $800 part that doesn't fit. We've done this for 30,000+ builds. We've seen every weird trim combo and factory option. Takes us 2 minutes to verify, saves you weeks of headaches.
What if the part arrives damaged or is the wrong item?
What if the part arrives damaged or is the wrong item?
We handle it. You don't fight with freight companies or file claims. Text us photos within 48 hours of delivery. If it's damaged or wrong, we ship a replacement immediately. You're not waiting 6 weeks for a freight claim to process. We eat the cost, not you. This is why we package everything like it's going to war. But if something slips through, we fix it ASAP. No forms, no back-and-forth, no "file a claim and wait." Just text us and we handle it.
Can I install this myself or do I need a shop?
Can I install this myself or do I need a shop?
Depends on the part. Emblems, front lips, some spoilers, bolt-on, DIY-friendly, you can do it in your driveway with basic tools. Full bumpers, hoods, wide-body kits, possible for experienced DIYers but most people take them to a shop for paint and install. Check the product description for installation difficulty. If you're unsure, text us. We'll be honest about whether you can handle it or if you should take it to a pro. We'd rather you know upfront than get frustrated halfway through.
What's your return policy if it doesn't fit or I don't like it?
What's your return policy if it doesn't fit or I don't like it?
30 days, unused parts in original packaging. You pay return shipping unless we sent the wrong part or it arrived defective. Once you install it, modify it, paint it, or mount it, we can't take it back. That's why we push so hard on verifying fitment BEFORE you order. We don't want you stuck with something you can't use. Text us before ordering if you're unsure. We'll confirm fitment so you never have to worry about returns.
Do you offer financing?
Do you offer financing?
Yes. Affirm and Shop Pay available at checkout for orders over $50. Split payments over 3-12 months depending on order size. No hard credit check to see your options. Most people use this for big-ticket items like body kits, suspension setups, or wheel/tire packages. Rates vary based on credit. You see the monthly payment before you commit. Makes it easier to build now instead of waiting months to save up.
What if I have questions after I receive the part?
What if I have questions after I receive the part?
Text 772-277-2495. We don't disappear after you buy. Fitment questions, installation issues, "does this bolt go here" questions... we'll walk you through it. We've installed these parts ourselves or helped hundreds of people install them. You're not getting transferred to a call center in the Philippines. You're texting someone who's actually installed your part before. If we can't help remotely, we'll recommend a local shop that knows these parts.
Why should I buy from K2 instead of eBay/Amazon/other sites?
Why should I buy from K2 instead of eBay/Amazon/other sites?
eBay and Amazon sellers don't answer fitment questions. They don't verify your VIN before shipping. They don't handle freight damage claims for you. If something goes wrong, you're filing disputes and waiting weeks. We're builders selling to builders. We verify fitment before you order. We handle damage claims same-day. We answer texts in minutes. We're not the cheapest, but you're not gambling $800 on whether a part fits. You're paying for support, verification, and someone who cares if your build goes sideways.
What does your warranty cover?
What does your warranty cover?
1 year against manufacturing defects: cracking, warping, paint peeling, hardware failure, fitment issues caused by the part being made wrong. Does NOT cover installation damage (you cracked it bolting it on), road damage (curb rash, rock chips), or normal wear. If it breaks because we made it wrong, we replace it free. If it breaks because you hit a parking block, that's on you. We're fair about it. Send photos and we'll tell you honestly if it's covered.
Shipping
Do you ship overseas?
Do you ship overseas?
Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.
How much does shipping cost and when will I see the total?
How much does shipping cost and when will I see the total?
Depending on where you're located, small parts can ship free. Large parts like bumpers, hoods, and body kits require freight shipping. Uou'll see the exact cost at checkout before you pay. Freight usually runs $150-$300 depending on size and your location. We know it's expensive. We negotiate the best rates we can. If you're ordering multiple large parts, text us. We can sometimes combine shipping and save you money. We're not hiding fees in the final step. What you see at checkout is what you pay.
How long will it take to receive my order?
How long will it take to receive my order?
It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.
