Audi R8 1st Gen Competition Valved Exhaust System Yonristic Performance
Audi R8 1st gen exhaust Upgrade for Sound, Control, and Performance
The first-generation Audi R8 is a landmark car—lightweight, naturally aspirated, and engineered around sound as much as speed. Our exhaust system is designed to unlock that character without compromising drivability or refinement. Built around a true X-pipe configuration, the system balances exhaust pulses from both banks before the rear section, smoothing airflow and sharpening the engine’s natural frequency. The result is a cleaner, more exotic tone that rises with RPM instead of flattening out, preserving the high-revving personality that defines the R8 V8 and V10 platforms.
This is a fully valved system, offering maximum flexibility. The exhaust can operate using the factory Audi valve control, retaining OEM drive-mode integration, or through the remote valve controller we provide, allowing on-demand control regardless of vehicle settings. With the valves open, exhaust flow follows a near straight-through path across the X-pipe and out to the rear exits, delivering maximum volume, instant throttle response, and sharp, motorsport-style overrun. Valves closed route the gases through the rear canisters, reducing overall output while maintaining a deep, mechanical tone suitable for street use and long drives.
Engineering and durability are core to the design. All primary junctions use casted collectors and transition pieces, ensuring smooth internal geometry where traditional welded joints can introduce turbulence. This improves flow consistency, reduces heat stress, and enhances long-term reliability—especially critical for high-revving naturally aspirated engines. The system is available in AISI 304 stainless steel for strength and longevity, or TI-6AL-4V (Grade 5) titanium for significant weight reduction and a sharper, more responsive acoustic character. Every unit is hand-fabricated and TIG-welded for structural integrity and a clean, motorsport-grade finish.
Designed using precise vehicle measurements, the exhaust bolts directly to factory mounting points with no cutting or modification required. It fits both V8 and V10 first-generation R8 models, transforming the car’s sound from muted OEM restraint into a clear, aggressive, and unmistakably exotic voice—exactly how an R8 should sound.
Key Specifications
Vehicle Fitment
Audi R8 First Generation (2008-2015)
• V8 models
• V10 models
• Coupe & Spyder variants
(Model years vary by market; designed to match OEM mounting points)
Exhaust Configuration
• True X-pipe design for balanced exhaust pulse merging
• Dual-path valved system
• Casted collectors and transition sections for optimized internal flow
• Straight-through routing when valves are open
• Muffled routing when valves are closed for reduced output
Valve Control
• Compatible with factory Audi valve control
• Includes remote valve control module for independent on-demand operation
• Valves can be operated regardless of drive mode when using remote
Materials
• AISI 304 Stainless Steel – corrosion-resistant, durable, daily-drivable
• TI-6AL-4V (Grade 5) Titanium – lightweight, heat-resistant, enhanced acoustic response
• All systems hand TIG-welded for strength and precision
Manufacturing & Engineering
• Casted exhaust sections for smooth internal geometry and reduced turbulence
• Mandrel-bent tubing to maintain constant diameter through all bends
• CNC-cut flanges and brackets for OEM-level fitment
• Designed to withstand high-RPM, naturally aspirated operation
Performance Gains (Estimated)
• Horsepower Gain: ~ +18–25 HP
• Torque Gain: ~ +14–20 lb-ft
• Improved throttle response and reduced backpressure
(Gains vary by engine configuration, material choice, and supporting modifications)
Weight Reduction
• Stainless Steel: Moderate reduction vs OEM
• Titanium: Significant weight savings over factory exhaust
Installation
• 100% bolt-on installation
• No cutting, welding, or permanent modification required
• Utilizes factory mounting locations
Precision-Tuned Sound for the Audi R8
The Audi R8 1st gen exhaust from Yonristic Performance is built for drivers who want a sharper, richer, and more exciting exhaust note. This competition valved exhaust system brings out the natural character of the V8 or V10 engine, depending on the model, while keeping the tone refined enough for everyday use when the valves are closed. When opened, the system delivers a more aggressive and motorsport-inspired sound that turns every drive into a more thrilling experience. It is designed to enhance the R8’s presence without sounding artificial, making it a strong upgrade for enthusiasts who value both performance and quality.
Valved Design for Flexible Driving
One of the biggest advantages of this system is its valved design, which gives the driver better control over exhaust flow and sound levels. In quiet mode, the system helps reduce drone and keeps the car more comfortable for city driving or highway cruising. When you want a more dramatic driving experience, the valves open to release a louder and freer exhaust note. This flexibility makes the Audi R8 1st gen exhaust ideal for owners who want one system that performs well in different situations. It delivers daily usability without sacrificing the excitement that makes the R8 such a special sports car.
Built for Performance and Long-Term Use
Yonristic Performance engineers this exhaust system with quality materials and a strong focus on durability. The construction is made to handle high heat, demanding driving conditions, and repeated performance use. Beyond the sound upgrade, the system is designed to support smoother exhaust movement, helping the car breathe more efficiently. While the main benefit is sound and driver engagement, the overall design reflects a performance-first approach that matches the spirit of the Audi R8. For owners seeking a reliable and well-built Audi R8 1st gen exhaust, this system offers a practical balance of strength, style, and function.
A Premium Upgrade for R8 Enthusiasts
This exhaust system is a premium choice for Audi R8 owners who want their car to stand out in both sound and driving feel. It adds a more exciting personality to the vehicle while maintaining the refined look and feel expected from a high-end performance car. The system fits the R8’s design philosophy by combining control, performance, and a more emotional driving experience. Whether you are upgrading for weekend drives, car meets, or track-inspired performance, the Audi R8 1st gen exhaust from Yonristic Performance delivers a noticeable improvement. It is an upgrade that enhances the car without changing what makes it special.
Audi R8 1st gen exhaust Upgrade for Sound, Control, and Performance
The first-generation Audi R8 is a landmark car—lightweight, naturally aspirated, and engineered around sound as much as speed. Our exhaust system is designed to unlock that character without compromising drivability or refinement. Built around a true X-pipe configuration, the system balances exhaust pulses from both banks before the rear section, smoothing airflow and sharpening the engine’s natural frequency. The result is a cleaner, more exotic tone that rises with RPM instead of flattening out, preserving the high-revving personality that defines the R8 V8 and V10 platforms.
This is a fully valved system, offering maximum flexibility. The exhaust can operate using the factory Audi valve control, retaining OEM drive-mode integration, or through the remote valve controller we provide, allowing on-demand control regardless of vehicle settings. With the valves open, exhaust flow follows a near straight-through path across the X-pipe and out to the rear exits, delivering maximum volume, instant throttle response, and sharp, motorsport-style overrun. Valves closed route the gases through the rear canisters, reducing overall output while maintaining a deep, mechanical tone suitable for street use and long drives.
Engineering and durability are core to the design. All primary junctions use casted collectors and transition pieces, ensuring smooth internal geometry where traditional welded joints can introduce turbulence. This improves flow consistency, reduces heat stress, and enhances long-term reliability—especially critical for high-revving naturally aspirated engines. The system is available in AISI 304 stainless steel for strength and longevity, or TI-6AL-4V (Grade 5) titanium for significant weight reduction and a sharper, more responsive acoustic character. Every unit is hand-fabricated and TIG-welded for structural integrity and a clean, motorsport-grade finish.
Designed using precise vehicle measurements, the exhaust bolts directly to factory mounting points with no cutting or modification required. It fits both V8 and V10 first-generation R8 models, transforming the car’s sound from muted OEM restraint into a clear, aggressive, and unmistakably exotic voice—exactly how an R8 should sound.
Key Specifications
Vehicle Fitment
Audi R8 First Generation (2008-2015)
• V8 models
• V10 models
• Coupe & Spyder variants
(Model years vary by market; designed to match OEM mounting points)
Exhaust Configuration
• True X-pipe design for balanced exhaust pulse merging
• Dual-path valved system
• Casted collectors and transition sections for optimized internal flow
• Straight-through routing when valves are open
• Muffled routing when valves are closed for reduced output
Valve Control
• Compatible with factory Audi valve control
• Includes remote valve control module for independent on-demand operation
• Valves can be operated regardless of drive mode when using remote
Materials
• AISI 304 Stainless Steel – corrosion-resistant, durable, daily-drivable
• TI-6AL-4V (Grade 5) Titanium – lightweight, heat-resistant, enhanced acoustic response
• All systems hand TIG-welded for strength and precision
Manufacturing & Engineering
• Casted exhaust sections for smooth internal geometry and reduced turbulence
• Mandrel-bent tubing to maintain constant diameter through all bends
• CNC-cut flanges and brackets for OEM-level fitment
• Designed to withstand high-RPM, naturally aspirated operation
Performance Gains (Estimated)
• Horsepower Gain: ~ +18–25 HP
• Torque Gain: ~ +14–20 lb-ft
• Improved throttle response and reduced backpressure
(Gains vary by engine configuration, material choice, and supporting modifications)
Weight Reduction
• Stainless Steel: Moderate reduction vs OEM
• Titanium: Significant weight savings over factory exhaust
Installation
• 100% bolt-on installation
• No cutting, welding, or permanent modification required
• Utilizes factory mounting locations
Precision-Tuned Sound for the Audi R8
The Audi R8 1st gen exhaust from Yonristic Performance is built for drivers who want a sharper, richer, and more exciting exhaust note. This competition valved exhaust system brings out the natural character of the V8 or V10 engine, depending on the model, while keeping the tone refined enough for everyday use when the valves are closed. When opened, the system delivers a more aggressive and motorsport-inspired sound that turns every drive into a more thrilling experience. It is designed to enhance the R8’s presence without sounding artificial, making it a strong upgrade for enthusiasts who value both performance and quality.
Valved Design for Flexible Driving
One of the biggest advantages of this system is its valved design, which gives the driver better control over exhaust flow and sound levels. In quiet mode, the system helps reduce drone and keeps the car more comfortable for city driving or highway cruising. When you want a more dramatic driving experience, the valves open to release a louder and freer exhaust note. This flexibility makes the Audi R8 1st gen exhaust ideal for owners who want one system that performs well in different situations. It delivers daily usability without sacrificing the excitement that makes the R8 such a special sports car.
Built for Performance and Long-Term Use
Yonristic Performance engineers this exhaust system with quality materials and a strong focus on durability. The construction is made to handle high heat, demanding driving conditions, and repeated performance use. Beyond the sound upgrade, the system is designed to support smoother exhaust movement, helping the car breathe more efficiently. While the main benefit is sound and driver engagement, the overall design reflects a performance-first approach that matches the spirit of the Audi R8. For owners seeking a reliable and well-built Audi R8 1st gen exhaust, this system offers a practical balance of strength, style, and function.
A Premium Upgrade for R8 Enthusiasts
This exhaust system is a premium choice for Audi R8 owners who want their car to stand out in both sound and driving feel. It adds a more exciting personality to the vehicle while maintaining the refined look and feel expected from a high-end performance car. The system fits the R8’s design philosophy by combining control, performance, and a more emotional driving experience. Whether you are upgrading for weekend drives, car meets, or track-inspired performance, the Audi R8 1st gen exhaust from Yonristic Performance delivers a noticeable improvement. It is an upgrade that enhances the car without changing what makes it special.
- Fitment verified for YOUR exact year/model/trim
- Not sure? Call +1 772-277-2495 for a real specialist to help you order
- Got install questions? Text a tech who's actually installed this part before, even after it arrives
FREE Shipping
Select your exact model and see if this part fits
Audi R8 1st Gen Competition Valved Exhaust System Yonristic Performance - Stright Pipe / AISI304 Stainless Steel / V8 4.2L (2008-2013) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Wrong fit or arrives damaged? Free replacement or refund
30,000+ Happy Customers
30-Day Returns
One Year Warranty
Details
Details
Audi R8 1st gen exhaust Upgrade for Sound, Control, and Performance
The first-generation Audi R8 is a landmark car—lightweight, naturally aspirated, and engineered around sound as much as speed. Our exhaust system is designed to unlock that character without compromising drivability or refinement. Built around a true X-pipe configuration, the system balances exhaust pulses from both banks before the rear section, smoothing airflow and sharpening the engine’s natural frequency. The result is a cleaner, more exotic tone that rises with RPM instead of flattening out, preserving the high-revving personality that defines the R8 V8 and V10 platforms.
This is a fully valved system, offering maximum flexibility. The exhaust can operate using the factory Audi valve control, retaining OEM drive-mode integration, or through the remote valve controller we provide, allowing on-demand control regardless of vehicle settings. With the valves open, exhaust flow follows a near straight-through path across the X-pipe and out to the rear exits, delivering maximum volume, instant throttle response, and sharp, motorsport-style overrun. Valves closed route the gases through the rear canisters, reducing overall output while maintaining a deep, mechanical tone suitable for street use and long drives.
Engineering and durability are core to the design. All primary junctions use casted collectors and transition pieces, ensuring smooth internal geometry where traditional welded joints can introduce turbulence. This improves flow consistency, reduces heat stress, and enhances long-term reliability—especially critical for high-revving naturally aspirated engines. The system is available in AISI 304 stainless steel for strength and longevity, or TI-6AL-4V (Grade 5) titanium for significant weight reduction and a sharper, more responsive acoustic character. Every unit is hand-fabricated and TIG-welded for structural integrity and a clean, motorsport-grade finish.
Designed using precise vehicle measurements, the exhaust bolts directly to factory mounting points with no cutting or modification required. It fits both V8 and V10 first-generation R8 models, transforming the car’s sound from muted OEM restraint into a clear, aggressive, and unmistakably exotic voice—exactly how an R8 should sound.
Key Specifications
Vehicle Fitment
Audi R8 First Generation (2008-2015)
• V8 models
• V10 models
• Coupe & Spyder variants
(Model years vary by market; designed to match OEM mounting points)
Exhaust Configuration
• True X-pipe design for balanced exhaust pulse merging
• Dual-path valved system
• Casted collectors and transition sections for optimized internal flow
• Straight-through routing when valves are open
• Muffled routing when valves are closed for reduced output
Valve Control
• Compatible with factory Audi valve control
• Includes remote valve control module for independent on-demand operation
• Valves can be operated regardless of drive mode when using remote
Materials
• AISI 304 Stainless Steel – corrosion-resistant, durable, daily-drivable
• TI-6AL-4V (Grade 5) Titanium – lightweight, heat-resistant, enhanced acoustic response
• All systems hand TIG-welded for strength and precision
Manufacturing & Engineering
• Casted exhaust sections for smooth internal geometry and reduced turbulence
• Mandrel-bent tubing to maintain constant diameter through all bends
• CNC-cut flanges and brackets for OEM-level fitment
• Designed to withstand high-RPM, naturally aspirated operation
Performance Gains (Estimated)
• Horsepower Gain: ~ +18–25 HP
• Torque Gain: ~ +14–20 lb-ft
• Improved throttle response and reduced backpressure
(Gains vary by engine configuration, material choice, and supporting modifications)
Weight Reduction
• Stainless Steel: Moderate reduction vs OEM
• Titanium: Significant weight savings over factory exhaust
Installation
• 100% bolt-on installation
• No cutting, welding, or permanent modification required
• Utilizes factory mounting locations
Precision-Tuned Sound for the Audi R8
The Audi R8 1st gen exhaust from Yonristic Performance is built for drivers who want a sharper, richer, and more exciting exhaust note. This competition valved exhaust system brings out the natural character of the V8 or V10 engine, depending on the model, while keeping the tone refined enough for everyday use when the valves are closed. When opened, the system delivers a more aggressive and motorsport-inspired sound that turns every drive into a more thrilling experience. It is designed to enhance the R8’s presence without sounding artificial, making it a strong upgrade for enthusiasts who value both performance and quality.
Valved Design for Flexible Driving
One of the biggest advantages of this system is its valved design, which gives the driver better control over exhaust flow and sound levels. In quiet mode, the system helps reduce drone and keeps the car more comfortable for city driving or highway cruising. When you want a more dramatic driving experience, the valves open to release a louder and freer exhaust note. This flexibility makes the Audi R8 1st gen exhaust ideal for owners who want one system that performs well in different situations. It delivers daily usability without sacrificing the excitement that makes the R8 such a special sports car.
Built for Performance and Long-Term Use
Yonristic Performance engineers this exhaust system with quality materials and a strong focus on durability. The construction is made to handle high heat, demanding driving conditions, and repeated performance use. Beyond the sound upgrade, the system is designed to support smoother exhaust movement, helping the car breathe more efficiently. While the main benefit is sound and driver engagement, the overall design reflects a performance-first approach that matches the spirit of the Audi R8. For owners seeking a reliable and well-built Audi R8 1st gen exhaust, this system offers a practical balance of strength, style, and function.
A Premium Upgrade for R8 Enthusiasts
This exhaust system is a premium choice for Audi R8 owners who want their car to stand out in both sound and driving feel. It adds a more exciting personality to the vehicle while maintaining the refined look and feel expected from a high-end performance car. The system fits the R8’s design philosophy by combining control, performance, and a more emotional driving experience. Whether you are upgrading for weekend drives, car meets, or track-inspired performance, the Audi R8 1st gen exhaust from Yonristic Performance delivers a noticeable improvement. It is an upgrade that enhances the car without changing what makes it special.
Fitment
Fitment
Our Guarantee
Our Guarantee
Warranty Assurance:
At K2 Industries, your satisfaction is our priority, and we stand behind the quality of our products. Here's a brief overview of our warranty:
Defect Coverage:
If you find a defect after receiving your order, get in touch with us. We're committed to resolving the issue, whether it involves a replacement, repair, or refund.
Installation Note:
Please inspect your purchase before installation. Unfortunately, damages post-installation are not covered, so ensure everything looks good beforehand.
Claims Made Simple:
Need to make a claim? Reach out to us at support@k2-industries.com. We're here to assist you. Just keep your original packaging and documentation handy.
Your Satisfaction Matters:
Your trust in K2 Industries is appreciated. We're dedicated to ensuring your satisfaction with our quality automotive parts.
Shipping & Returns
Shipping & Returns
Shipping Information:
At K2 Industries, we strive to provide a seamless and efficient shopping experience for automotive enthusiasts like you. Our commitment is to deliver high-quality parts to your doorstep with the utmost care.
Fast and Reliable Shipping:
Many of our products are stocked in our local warehouse, ensuring swift processing and delivery. Orders placed for these items typically ship within 2-5 business days, allowing you to get your parts in no time.
Extended Selection, Global Reach:
To offer you a broader range of automotive parts, some items are sourced from trusted suppliers around the world. While these products might have a slightly longer processing time, we assure you that the wait is worth it for the exceptional quality and value they bring.
Shipping Transparency:
For products shipped internationally, we provide estimated delivery times on the product page. Rest assured, we are continually working to optimize our supply chain and minimize any potential delays.
Combined Shipments:
To streamline your shopping experience, if your order includes items from both our local warehouse and international suppliers, they may be shipped separately. You will receive separate tracking information for each shipment.
Questions or Concerns?
If you have any questions about shipping or would like assistance tracking your order, our dedicated customer support team is here to help. Feel free to reach out to us at support@k2-industries.com.
You can also track your order here
Thank you for choosing K2 Industries for your automotive needs. We appreciate your trust in us.
FAQs
Will this require a tune after installation?
Bolt-ons like exhaust tips, cat-backs, and basic intakes usually don't. Larger mods — turbo upgrades, supercharger kits, headers — typically need an ECU tune to run safely. The spec sheet indicates if tuning is recommended.
Is this part emissions / CARB compliant?
If you're in California or another CARB-regulated state, check the CARB status on this page before ordering. Many performance parts are off-road or competition use only — if so, we say it clearly.
Will installing this void my factory warranty?
Modifications can affect manufacturer warranty on related components only — not your entire warranty. The Magnuson-Moss Warranty Act protects you from blanket warranty voids. If warranty matters to you, talk to your dealer before installing.
Can I install this myself?
Depends on the part. Bolt-ons are DIY-friendly. Turbo upgrades, headers, and supercharger kits need a professional shop. The product description gives a difficulty estimate.
Audi R8 1st Gen Competition Valved Exhaust System Yonristic Perform...
The K2 Difference
- • Built by enthusiasts who've made every fitment mistake you're afraid of. Now we verify parts for 30,000+ builds a year with zero wrong-part claims.
- • Real specialists answer your questions in minutes, not chatbots reading scripts. We've built the same cars you're building.
- • Freight damage, wrong parts, installation question, we handle it so you don't deal with suppliers or shipping companies.
Built By Someone Who's Been There
Max, the Owner, started in his garage making E36 M3 tail lights in his own oven.
- • Started modifying cars before he could legally drive them
- • Spent years hunting down parts that actually fit and don't suck
- • Made the same fitment mistakes you're afraid of
What You Get With Every Order
What Sets K2 Industries Apart?
Perfect fit guaranteedFrequently Asked Questions
How do I know this will actually fit my car?
How do I know this will actually fit my car?
Every part listing shows compatible years, models, and trims. But here's the thing—trim packages and factory options can be confusing. If you're not 100% certain, text us at 772-277-2495 with your VIN or photos of your car. We'll verify fitment before you order so you're not stuck with an $800 part that doesn't fit. We've done this for 30,000+ builds. We've seen every weird trim combo and factory option. Takes us 2 minutes to verify, saves you weeks of headaches.
What if the part arrives damaged or is the wrong item?
What if the part arrives damaged or is the wrong item?
We handle it. You don't fight with freight companies or file claims. Text us photos within 48 hours of delivery. If it's damaged or wrong, we ship a replacement immediately. You're not waiting 6 weeks for a freight claim to process. We eat the cost, not you. This is why we package everything like it's going to war. But if something slips through, we fix it ASAP. No forms, no back-and-forth, no "file a claim and wait." Just text us and we handle it.
Can I install this myself or do I need a shop?
Can I install this myself or do I need a shop?
Depends on the part. Emblems, front lips, some spoilers, bolt-on, DIY-friendly, you can do it in your driveway with basic tools. Full bumpers, hoods, wide-body kits, possible for experienced DIYers but most people take them to a shop for paint and install. Check the product description for installation difficulty. If you're unsure, text us. We'll be honest about whether you can handle it or if you should take it to a pro. We'd rather you know upfront than get frustrated halfway through.
What's your return policy if it doesn't fit or I don't like it?
What's your return policy if it doesn't fit or I don't like it?
30 days, unused parts in original packaging. You pay return shipping unless we sent the wrong part or it arrived defective. Once you install it, modify it, paint it, or mount it, we can't take it back. That's why we push so hard on verifying fitment BEFORE you order. We don't want you stuck with something you can't use. Text us before ordering if you're unsure. We'll confirm fitment so you never have to worry about returns.
Do you offer financing?
Do you offer financing?
Yes. Affirm and Shop Pay available at checkout for orders over $50. Split payments over 3-12 months depending on order size. No hard credit check to see your options. Most people use this for big-ticket items like body kits, suspension setups, or wheel/tire packages. Rates vary based on credit. You see the monthly payment before you commit. Makes it easier to build now instead of waiting months to save up.
What if I have questions after I receive the part?
What if I have questions after I receive the part?
Text 772-277-2495. We don't disappear after you buy. Fitment questions, installation issues, "does this bolt go here" questions... we'll walk you through it. We've installed these parts ourselves or helped hundreds of people install them. You're not getting transferred to a call center in the Philippines. You're texting someone who's actually installed your part before. If we can't help remotely, we'll recommend a local shop that knows these parts.
Why should I buy from K2 instead of eBay/Amazon/other sites?
Why should I buy from K2 instead of eBay/Amazon/other sites?
eBay and Amazon sellers don't answer fitment questions. They don't verify your VIN before shipping. They don't handle freight damage claims for you. If something goes wrong, you're filing disputes and waiting weeks. We're builders selling to builders. We verify fitment before you order. We handle damage claims same-day. We answer texts in minutes. We're not the cheapest, but you're not gambling $800 on whether a part fits. You're paying for support, verification, and someone who cares if your build goes sideways.
What does your warranty cover?
What does your warranty cover?
1 year against manufacturing defects: cracking, warping, paint peeling, hardware failure, fitment issues caused by the part being made wrong. Does NOT cover installation damage (you cracked it bolting it on), road damage (curb rash, rock chips), or normal wear. If it breaks because we made it wrong, we replace it free. If it breaks because you hit a parking block, that's on you. We're fair about it. Send photos and we'll tell you honestly if it's covered.
Shipping
Do you ship overseas?
Do you ship overseas?
Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.
How much does shipping cost and when will I see the total?
How much does shipping cost and when will I see the total?
Depending on where you're located, small parts can ship free. Large parts like bumpers, hoods, and body kits require freight shipping. Uou'll see the exact cost at checkout before you pay. Freight usually runs $150-$300 depending on size and your location. We know it's expensive. We negotiate the best rates we can. If you're ordering multiple large parts, text us. We can sometimes combine shipping and save you money. We're not hiding fees in the final step. What you see at checkout is what you pay.
How long will it take to receive my order?
How long will it take to receive my order?
It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.
