Product came quick and fit great. I love it.

IN STOCK SHIPS OUT 2-3 BUSINESS DAYS AFTER PURCHASE DATE.
Pre-Preg Gloss Carbon Fiber | Direct-Fit Replacements
Fitment: 2025–2026 CT5-V Blackwing (does not fit non-Blackwing CT5)
Position: Front bumper — left & right outer side grilles (pair)
Reference OE Part Nos. (for fitment cross-check): GM 42794543 (LH), GM 42794542 (RH)
(These numbers are for OEM plastic pieces; this product is an aftermarket carbon-fiber replacement.)
Give the Blackwing front fascia the material it deserves. These direct-fit outer grilles are engineered in pre-preg (dry) carbon fiber and cured in an autoclave for strength, precision, and ultra-clean weave alignment. You’ll keep factory geometry for proper airflow and sensor clearances, while upgrading to a premium, high-gloss UV-protected finish that matches high-end OE carbon.
True Pre-Preg / Autoclave Construction: Lightweight, rigid, and dimensionally stable—no excess resin weight or print-through.
Direct-Fit Geometry: CAD-matched to the 2025–2026 CT5-V Blackwing bumper; designed to replace the factory outer grille pair corresponding to GM 42794543 / 42794542.
Show-Grade Finish: Gloss clearcoat with UV inhibitors to resist yellowing and hazing.
Weave & Layup Quality: 3K 2×2 twill (other weaves by request); mirrored weave orientation left/right for a balanced appearance.
Factory-Style Mounting: Utilizes OEM-style clip locations and tabs for a clean, secure install.
Aero/Airflow Preserved: Maintains OE duct openings to support brake- and intercooler-side flow paths.
Weight Reduction: Carbon construction typically reduces weight versus factory plastic while elevating visual impact.
(1) Left (Driver) Outer Grille — carbon fiber (pre-preg, gloss)
(1) Right (Passenger) Outer Grille — carbon fiber (pre-preg, gloss)
Installation guide (digital)
Surface-prep wipes & microfiber (when available)
Material: Pre-impregnated 3K 2×2 twill carbon fiber, multi-ply layup
Process: Autoclave cure, post-cure, hand-polished high-gloss UV clear
Finish: Gloss (matte available by special order)
Fitment Window: 2025–2026 Cadillac CT5-V Blackwing only
Position: Front bumper — outer (left/right) grilles
OE Cross-References: GM 42794543 (LH), 42794542 (RH) (for fitment verification only)
Direct replacement: Remove factory outer grilles and install carbon units using OEM-style mounting points.
Hardware/Retainers: Reuse OEM fasteners/clips where applicable; inspect and replace worn clips.
Sensors/Equipment: If your vehicle has front parking sensors or adaptive-cruise/radar equipment referenced near the outer grille areas, verify clearance and orientation during install.
Professional Recommended: Body-shop or experienced installer is recommended to ensure perfect panel alignment and clip engagement.
Prep & Care: Wipe with isopropyl alcohol prior to install. After installation, use non-abrasive wash and a polymer sealant or ceramic coating safe for carbon clearcoat.
UV-Safe Clear: Built-in UV inhibitors; periodic sealing/waxing recommended.
Warranty: Limited 1-year craftsmanship warranty against manufacturing defects (finish wear from harsh chemicals/abrasives excluded).
Support: Fitment questions? Share VIN and photos of your front bumper and we’ll confirm compatibility.
Packaging: Foam-bagged, edge-guarded, and double-boxed to minimize transit damage.
Transit: Ships from our warehouse; business-address delivery often arrives faster and more reliably.
AA_00000012

IN STOCK SHIPS OUT 2-3 BUSINESS DAYS AFTER PURCHASE DATE.
Pre-Preg Gloss Carbon Fiber | Direct-Fit Replacements
Fitment: 2025–2026 CT5-V Blackwing (does not fit non-Blackwing CT5)
Position: Front bumper — left & right outer side grilles (pair)
Reference OE Part Nos. (for fitment cross-check): GM 42794543 (LH), GM 42794542 (RH)
(These numbers are for OEM plastic pieces; this product is an aftermarket carbon-fiber replacement.)
Give the Blackwing front fascia the material it deserves. These direct-fit outer grilles are engineered in pre-preg (dry) carbon fiber and cured in an autoclave for strength, precision, and ultra-clean weave alignment. You’ll keep factory geometry for proper airflow and sensor clearances, while upgrading to a premium, high-gloss UV-protected finish that matches high-end OE carbon.
True Pre-Preg / Autoclave Construction: Lightweight, rigid, and dimensionally stable—no excess resin weight or print-through.
Direct-Fit Geometry: CAD-matched to the 2025–2026 CT5-V Blackwing bumper; designed to replace the factory outer grille pair corresponding to GM 42794543 / 42794542.
Show-Grade Finish: Gloss clearcoat with UV inhibitors to resist yellowing and hazing.
Weave & Layup Quality: 3K 2×2 twill (other weaves by request); mirrored weave orientation left/right for a balanced appearance.
Factory-Style Mounting: Utilizes OEM-style clip locations and tabs for a clean, secure install.
Aero/Airflow Preserved: Maintains OE duct openings to support brake- and intercooler-side flow paths.
Weight Reduction: Carbon construction typically reduces weight versus factory plastic while elevating visual impact.
(1) Left (Driver) Outer Grille — carbon fiber (pre-preg, gloss)
(1) Right (Passenger) Outer Grille — carbon fiber (pre-preg, gloss)
Installation guide (digital)
Surface-prep wipes & microfiber (when available)
Material: Pre-impregnated 3K 2×2 twill carbon fiber, multi-ply layup
Process: Autoclave cure, post-cure, hand-polished high-gloss UV clear
Finish: Gloss (matte available by special order)
Fitment Window: 2025–2026 Cadillac CT5-V Blackwing only
Position: Front bumper — outer (left/right) grilles
OE Cross-References: GM 42794543 (LH), 42794542 (RH) (for fitment verification only)
Direct replacement: Remove factory outer grilles and install carbon units using OEM-style mounting points.
Hardware/Retainers: Reuse OEM fasteners/clips where applicable; inspect and replace worn clips.
Sensors/Equipment: If your vehicle has front parking sensors or adaptive-cruise/radar equipment referenced near the outer grille areas, verify clearance and orientation during install.
Professional Recommended: Body-shop or experienced installer is recommended to ensure perfect panel alignment and clip engagement.
Prep & Care: Wipe with isopropyl alcohol prior to install. After installation, use non-abrasive wash and a polymer sealant or ceramic coating safe for carbon clearcoat.
UV-Safe Clear: Built-in UV inhibitors; periodic sealing/waxing recommended.
Warranty: Limited 1-year craftsmanship warranty against manufacturing defects (finish wear from harsh chemicals/abrasives excluded).
Support: Fitment questions? Share VIN and photos of your front bumper and we’ll confirm compatibility.
Packaging: Foam-bagged, edge-guarded, and double-boxed to minimize transit damage.
Transit: Ships from our warehouse; business-address delivery often arrives faster and more reliably.
AA_00000012
2025-2026 Cadillac CT5-V Blackwing Front Side Outer Grilles Pre Preg Gloss Carbon Fiber Pair is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Wrong fit or arrives damaged? Free replacement available

IN STOCK SHIPS OUT 2-3 BUSINESS DAYS AFTER PURCHASE DATE.
Pre-Preg Gloss Carbon Fiber | Direct-Fit Replacements
Fitment: 2025–2026 CT5-V Blackwing (does not fit non-Blackwing CT5)
Position: Front bumper — left & right outer side grilles (pair)
Reference OE Part Nos. (for fitment cross-check): GM 42794543 (LH), GM 42794542 (RH)
(These numbers are for OEM plastic pieces; this product is an aftermarket carbon-fiber replacement.)
Give the Blackwing front fascia the material it deserves. These direct-fit outer grilles are engineered in pre-preg (dry) carbon fiber and cured in an autoclave for strength, precision, and ultra-clean weave alignment. You’ll keep factory geometry for proper airflow and sensor clearances, while upgrading to a premium, high-gloss UV-protected finish that matches high-end OE carbon.
True Pre-Preg / Autoclave Construction: Lightweight, rigid, and dimensionally stable—no excess resin weight or print-through.
Direct-Fit Geometry: CAD-matched to the 2025–2026 CT5-V Blackwing bumper; designed to replace the factory outer grille pair corresponding to GM 42794543 / 42794542.
Show-Grade Finish: Gloss clearcoat with UV inhibitors to resist yellowing and hazing.
Weave & Layup Quality: 3K 2×2 twill (other weaves by request); mirrored weave orientation left/right for a balanced appearance.
Factory-Style Mounting: Utilizes OEM-style clip locations and tabs for a clean, secure install.
Aero/Airflow Preserved: Maintains OE duct openings to support brake- and intercooler-side flow paths.
Weight Reduction: Carbon construction typically reduces weight versus factory plastic while elevating visual impact.
(1) Left (Driver) Outer Grille — carbon fiber (pre-preg, gloss)
(1) Right (Passenger) Outer Grille — carbon fiber (pre-preg, gloss)
Installation guide (digital)
Surface-prep wipes & microfiber (when available)
Material: Pre-impregnated 3K 2×2 twill carbon fiber, multi-ply layup
Process: Autoclave cure, post-cure, hand-polished high-gloss UV clear
Finish: Gloss (matte available by special order)
Fitment Window: 2025–2026 Cadillac CT5-V Blackwing only
Position: Front bumper — outer (left/right) grilles
OE Cross-References: GM 42794543 (LH), 42794542 (RH) (for fitment verification only)
Direct replacement: Remove factory outer grilles and install carbon units using OEM-style mounting points.
Hardware/Retainers: Reuse OEM fasteners/clips where applicable; inspect and replace worn clips.
Sensors/Equipment: If your vehicle has front parking sensors or adaptive-cruise/radar equipment referenced near the outer grille areas, verify clearance and orientation during install.
Professional Recommended: Body-shop or experienced installer is recommended to ensure perfect panel alignment and clip engagement.
Prep & Care: Wipe with isopropyl alcohol prior to install. After installation, use non-abrasive wash and a polymer sealant or ceramic coating safe for carbon clearcoat.
UV-Safe Clear: Built-in UV inhibitors; periodic sealing/waxing recommended.
Warranty: Limited 1-year craftsmanship warranty against manufacturing defects (finish wear from harsh chemicals/abrasives excluded).
Support: Fitment questions? Share VIN and photos of your front bumper and we’ll confirm compatibility.
Packaging: Foam-bagged, edge-guarded, and double-boxed to minimize transit damage.
Transit: Ships from our warehouse; business-address delivery often arrives faster and more reliably.
AA_00000012
Warranty Assurance:
At K2 Industries, your satisfaction is our priority, and we stand behind the quality of our products. Here's a brief overview of our warranty:
Defect Coverage:
If you find a defect after receiving your order, get in touch with us. We're committed to resolving the issue, whether it involves a replacement, repair, or refund.
Installation Note:
Please inspect your purchase before installation. Unfortunately, damages post-installation are not covered, so ensure everything looks good beforehand.
Claims Made Simple:
Need to make a claim? Reach out to us at support@k2-industries.com. We're here to assist you. Just keep your original packaging and documentation handy.
Your Satisfaction Matters:
Your trust in K2 Industries is appreciated. We're dedicated to ensuring your satisfaction with our quality automotive parts.
Shipping Information:
At K2 Industries, we strive to provide a seamless and efficient shopping experience for automotive enthusiasts like you. Our commitment is to deliver high-quality parts to your doorstep with the utmost care.
Fast and Reliable Shipping:
Many of our products are stocked in our local warehouse, ensuring swift processing and delivery. Orders placed for these items typically ship within 2-5 business days, allowing you to get your parts in no time.
Extended Selection, Global Reach:
To offer you a broader range of automotive parts, some items are sourced from trusted suppliers around the world. While these products might have a slightly longer processing time, we assure you that the wait is worth it for the exceptional quality and value they bring.
Shipping Transparency:
For products shipped internationally, we provide estimated delivery times on the product page. Rest assured, we are continually working to optimize our supply chain and minimize any potential delays.
Combined Shipments:
To streamline your shopping experience, if your order includes items from both our local warehouse and international suppliers, they may be shipped separately. You will receive separate tracking information for each shipment.
Questions or Concerns?
If you have any questions about shipping or would like assistance tracking your order, our dedicated customer support team is here to help. Feel free to reach out to us at support@k2-industries.com.
You can also track your order here
Thank you for choosing K2 Industries for your automotive needs. We appreciate your trust in us.
It's made for the vehicle fitment listed on this page. Confirm your model and trunk style before ordering, especially if your car has an aftermarket trunk or existing spoiler holes.
Some spoilers use 3M tape mounting (no drilling), others require bolt-through installation. The spec sheet tells you which. Once holes are drilled, they can't be undone.
Most ship unpainted and require paint to match your vehicle. A small number are available pre-painted in factory colors — the spec sheet tells you which.
Most wings sit above the trunk and don't interfere with backup cameras or parking sensors. Tall wings on hatchbacks may affect rear visibility — check the install photos to see how it sits relative to your rear glass.
Max, the Owner, started in his garage making E36 M3 tail lights in his own oven.
Every part listing shows compatible years, models, and trims. But here's the thing—trim packages and factory options can be confusing. If you're not 100% certain, text us at 772-277-2495 with your VIN or photos of your car. We'll verify fitment before you order so you're not stuck with an $800 part that doesn't fit. We've done this for 30,000+ builds. We've seen every weird trim combo and factory option. Takes us 2 minutes to verify, saves you weeks of headaches.
We handle it. You don't fight with freight companies or file claims. Text us photos within 48 hours of delivery. If it's damaged or wrong, we ship a replacement immediately. You're not waiting 6 weeks for a freight claim to process. We eat the cost, not you. This is why we package everything like it's going to war. But if something slips through, we fix it ASAP. No forms, no back-and-forth, no "file a claim and wait." Just text us and we handle it.
Depends on the part. Emblems, front lips, some spoilers, bolt-on, DIY-friendly, you can do it in your driveway with basic tools. Full bumpers, hoods, wide-body kits, possible for experienced DIYers but most people take them to a shop for paint and install. Check the product description for installation difficulty. If you're unsure, text us. We'll be honest about whether you can handle it or if you should take it to a pro. We'd rather you know upfront than get frustrated halfway through.
30 days, unused parts in original packaging. You pay return shipping unless we sent the wrong part or it arrived defective. Once you install it, modify it, paint it, or mount it, we can't take it back. That's why we push so hard on verifying fitment BEFORE you order. We don't want you stuck with something you can't use. Text us before ordering if you're unsure. We'll confirm fitment so you never have to worry about returns.
Yes. Affirm and Shop Pay available at checkout for orders over $50. Split payments over 3-12 months depending on order size. No hard credit check to see your options. Most people use this for big-ticket items like body kits, suspension setups, or wheel/tire packages. Rates vary based on credit. You see the monthly payment before you commit. Makes it easier to build now instead of waiting months to save up.
Text 772-277-2495. We don't disappear after you buy. Fitment questions, installation issues, "does this bolt go here" questions... we'll walk you through it. We've installed these parts ourselves or helped hundreds of people install them. You're not getting transferred to a call center in the Philippines. You're texting someone who's actually installed your part before. If we can't help remotely, we'll recommend a local shop that knows these parts.
eBay and Amazon sellers don't answer fitment questions. They don't verify your VIN before shipping. They don't handle freight damage claims for you. If something goes wrong, you're filing disputes and waiting weeks. We're builders selling to builders. We verify fitment before you order. We handle damage claims same-day. We answer texts in minutes. We're not the cheapest, but you're not gambling $800 on whether a part fits. You're paying for support, verification, and someone who cares if your build goes sideways.
1 year against manufacturing defects: cracking, warping, paint peeling, hardware failure, fitment issues caused by the part being made wrong. Does NOT cover installation damage (you cracked it bolting it on), road damage (curb rash, rock chips), or normal wear. If it breaks because we made it wrong, we replace it free. If it breaks because you hit a parking block, that's on you. We're fair about it. Send photos and we'll tell you honestly if it's covered.
Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.
Depending on where you're located, small parts can ship free. Large parts like bumpers, hoods, and body kits require freight shipping. Uou'll see the exact cost at checkout before you pay. Freight usually runs $150-$300 depending on size and your location. We know it's expensive. We negotiate the best rates we can. If you're ordering multiple large parts, text us. We can sometimes combine shipping and save you money. We're not hiding fees in the final step. What you see at checkout is what you pay.
It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.