Restore proper rear camber alignment on your lowered VAG PQ35-platform vehicle with this premium adjustable rear upper camber control arm pair, precision crafted for permanent durability and full alignment adjustment range. The factory rear suspension on PQ35-platform vehicles (MK5/MK6 Golf, Jetta, Passat, CC, Tiguan, Scirocco, EOS, Audi A3 8P, Q3, SEAT Leon, Altea, Skoda Octavia, Yeti, Superb, and related applications) does NOT provide any rear camber adjustment from the factory — meaning when you lower the vehicle for performance or aesthetic reasons, the rear suspension automatically gains negative camber that cannot be corrected with stock components. The result is dramatically uneven inner-edge tire wear, reduced tire life, compromised handling balance, and reduced traction during cornering. This adjustable camber arm pair replaces the fixed-length factory components with infinitely adjustable arms, enabling proper rear camber alignment across the full range of suspension modifications from mild street drops through aggressive track-focused setups.

Features:

Adjustable length design – enables precise rear camber alignment across the full range of suspension modifications
Direct OE-style replacement – installs into factory mounting points without modification
Improved vehicle stability and handling – proper rear camber adjustment optimizes the suspension geometry for predictable handling and consistent tire contact patches
Reduced tire wear – correcting camber on lowered or raised vehicles dramatically extends tire life by ensuring even tread contact
Wide cross-platform compatibility – fits the entire VAG PQ35 platform across VW, Audi, SEAT, and Skoda variants
Pair design – includes both left and right adjustable arms for complete rear camber correction in a single purchase
Essential supporting modification for any PQ35-platform lowering project

Specifications:

Condition: 100% Brand New
Type: Rear Adjustable Upper Camber Control Arms
Item Weight: 2.4 kg per pair
Quantity: Pair (Left & Right) – 2 Pieces
Position: Rear Upper Suspension
Platform Compatibility: VAG PQ35 Platform
Purpose: Performance Upgrade / Camber Alignment Correction

OE / Replacement Part Numbers:

1K0505323N / 1K0 505 323 N
5Q0505323C / 5Q0 505 323 C

Fitment:

VAG PQ35 Platform compatible vehicles. Verify your factory camber arm part number matches 1K0505323N or 5Q0505323C before ordering.

Volkswagen Fitment:

VW Golf MK5 (2003 – 2009) – Including GTI / R32
VW Golf MK6 (2008 – 2013) – Including GTI / R
VW Jetta MK5 / MK6 (2005 – 2018)
VW Passat B6 / B7 (2005 – 2014)
VW Passat CC (2008 – 2017)
VW Tiguan 5N (2007 – 2017)
VW Scirocco (2008 – 2017)
VW EOS (2006 – 2016)

Audi Fitment:

Audi A3 / S3 8P (2003 – 2013)
Audi Q3 8U (2011 – 2018)

SEAT Fitment:

SEAT Leon 1P (2005 – 2012)
SEAT Altea 5P (2004 – 2015)
SEAT Toledo 5P (2004 – 2009)

Skoda Fitment:

Skoda Octavia 1Z (2004 – 2013)
Skoda Yeti 5L (2009 – 2017)
Skoda Superb 3T (2008 – 2015)

Compatible with all PQ35 platform vehicles using factory camber arm part numbers 1K0505323N or 5Q0505323C
Confirm vehicle model, production year, and factory camber arm part number before ordering

Benefits:

Restores proper rear camber alignment on lowered PQ35-platform vehicles – the factory components provide ZERO camber adjustment, making this kit essential for any lowering modification
Dramatically extends tire life on lowered vehicles – correcting excessive negative camber prevents the inner-edge tire wear that develops on lowered PQ35 chassis with factory suspension components
Improves handling balance and consistency – proper camber alignment ensures consistent tire contact patches under cornering loads
Increases traction during aggressive cornering – correct camber settings maximize grip during high-load driving scenarios
Adjustable length design accommodates virtually any lowering modification – from mild street drops through aggressive track-focused setups
Pair design provides everything needed for complete rear camber correction – no need to source matching arms separately
Wide platform compatibility makes this versatile for VAG enthusiasts who manage multiple PQ35-platform vehicles
Essential supporting modification for any PQ35 lowering project – proper alignment is critical for tire longevity and handling

Important Use-Case Notes:

NVH consideration: Adjustable camber arms typically transmit slightly more road feedback than factory rubber-bushed arms – drivers seeking maximum cabin refinement may want to consider this trade-off
Recommended for street and performance use: Designed for street, spirited driving, and track day applications
Wheel alignment mandatory after installation: Camber arm installation REQUIRES professional wheel alignment to set proper specifications – this product enables alignment but does not perform it
Replacement for factory non-adjustable arms: The factory PQ35 chassis does not provide rear camber adjustment – these adjustable arms are essential for proper alignment after any suspension modification

Installation Notes:

Part number verification required: Confirm your factory rear upper camber arms use OE part numbers 1K0505323N or 5Q0505323C before ordering – verify by inspecting existing arms or consulting service documentation
Wheel alignment service required: Have your vehicle professionally aligned after installation to set proper rear camber specifications for your specific application (street, performance, or track use)
Properly support the rear of the vehicle on jack stands rated for the vehicle weight before beginning installation – never work under a vehicle supported only by a jack
Mark the original alignment positions of the existing camber arms before disassembly – this provides a reference point for initial alignment after installation
Carefully disconnect the factory camber arm from both inner and outer mounting points
Inspect surrounding suspension components during installation – worn bushings, ball joints, or other suspension components should be replaced before installing the new camber arms
Install the new adjustable camber arms in the factory mounting positions
Pre-set the camber arms to approximately the same length as the original components for initial alignment reference
Tighten all suspension hardware to factory torque specifications using a calibrated torque wrench
Drive the vehicle directly to a professional alignment shop after installation – do NOT drive aggressively until proper alignment is set
For street-driven vehicles: typical rear camber settings range from -1.0° to -1.5° depending on tire choice and driving style
For track day vehicles: more aggressive camber settings (-2.0° to -3.5°) may be appropriate based on tire selection and track use
Re-check alignment after initial driving cycles to verify settings remain stable
Test rear-end behavior at low speeds before aggressive driving
Professional installation strongly recommended – rear suspension work requires geometry knowledge and proper torque specifications
If unsure about compatibility with your specific VW, Audi, SEAT, or Skoda variant or alignment requirements, contact our team with your year, model, chassis code, and lowering configuration before ordering

Warranty:

12-month standard warranty from date of purchase
Contact our support team for assistance with any issues

VW JETTA MK6 (11-18) Build Parts