Amazing drl
1
of
13
Loading...
Jeep Wrangler 2018-2023 JLU 4 Door - Second Row Seat Delete Plate System - V2
Jeep Wrangler 2018-2023 JLU Seat Delete Plate System for the Second Row is available to order for the 60% Passenger Seat and 40% Drivers Seat or can be combined to create a 100% second row delete.
Completely redesigned V2 model. In the redesign of this classic seat delete, we added some features and upgraded the fit and finish. NOTE: The infill panels by each door will be shipped as part of each seat delete. There is no longer a need to order the infill panels separately as was necessary with the V1 seat delete design.
This model is designed to fit into 2018-2023 Model Year Vehicles.
Major Changes to V2:
-
Tighter fitting joints for a cleaner appearance.
-
Infill panel at doorway is now included in the design and has a tighter fit as well.
-
Center support leg is wider to create a better compartment divider.
-
Center support leg now has slotted mounting points for easier installation.
-
Front support leg has been widened and is a tighter fit as well.
-
Front support leg now has our new slotted pillow extension mounting points integrated.
-
Pillow extension is now available as an add on option for our V1 seat delete systems, for those that plan on sleeping in their rigs. With the Pillow extension, you now have 6' of platform length.
Click here for more details about our JLU Pillow Extension Kit
Jeep Wrangler JLU Rear Plate System is required to install the Seat Delete Plate System.
The 60% Passenger Seat Delete Plate System is a bolt in replacement for the 60% rear seat delete. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points to attach it to the Jeep JLU Rear Plate System, no drilling required. If you are installing just the 60% delete you will need to own or purchase a 60% Seat Delete Bracket. The bracket provides support for the 40% seat. This kit DOES NOT include the Jeep JLU Plate System, or the rear seat delete bracket.
Seat delete bracket can be found here
The 40% Driver Seat Delete Plate System is a bolt in replacement for the driver's side second row seat. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points without drilling and anchor points to attach it to the Jeep JLU Rear Plate System which is required to install the platform.
Second Row Seat Deletes require the Rear Plate System™ be installed in your vehicle as it serves as the main attachment point for seat deletes. Rear Plate System™ is sold separately.
This Plate System is NOT compatible with the Jeep Wrangler 4xe.
Second Row Seat Deletes for 2024 and newer Wranglers have been updated with new support legs. If your Jeep is 2024 or newer, please search the 2024+ listings on our website.
The Goose Gear plate system and sleeping platform for the Jeep JLU are direct bolt in units and require no drilling into your vehicle for model years 2018+. Designed and built with industrial grade plywood and coating using our propriety spray methods for superior durability and wear resistance.
Also makes a great platform for securing your own storage or gear including dog crates, other fridge slide brands, etc. If you have or plan to run an Ursa Minor J30 this also makes a great stepping platform.
The factory 40% seat weighs 32 pounds.
The 40% Seat Delete weighs 21 pounds
The factory 60% seat weighs 63 pounds.
The 60% Seat Delete weighs 28 pounds.
40% Usable Space: Roughly 31" x 19" measured at the top of the plate. However, with the front seat back in the full back position with a typical seat recline, the usable space get reduced to 19" wide x 23" long. Not quite big enough for a typical 35-50 liter refrigerator. Unless you use the front seat in a much more forward position.
60% Usable Space: Roughly 31" x 34" measured at the top of the plate. However, with the front seat back in the full back position with a typical seat recline, the usable space gets reduced to 19" wide x 34" long. Due to the wider width, this product will accommodate a fridge sideways on the delete.
…
Jeep Wrangler 2018-2023 JLU Seat Delete Plate System for the Second Row is available to order for the 60% Passenger Seat and 40% Drivers Seat or can be combined to create a 100% second row delete.
Completely redesigned V2 model. In the redesign of this classic seat delete, we added some features and upgraded the fit and finish. NOTE: The infill panels by each door will be shipped as part of each seat delete. There is no longer a need to order the infill panels separately as was necessary with the V1 seat delete design.
This model is designed to fit into 2018-2023 Model Year Vehicles.
Major Changes to V2:
-
Tighter fitting joints for a cleaner appearance.
-
Infill panel at doorway is now included in the design and has a tighter fit as well.
-
Center support leg is wider to create a better compartment divider.
-
Center support leg now has slotted mounting points for easier installation.
-
Front support leg has been widened and is a tighter fit as well.
-
Front support leg now has our new slotted pillow extension mounting points integrated.
-
Pillow extension is now available as an add on option for our V1 seat delete systems, for those that plan on sleeping in their rigs. With the Pillow extension, you now have 6' of platform length.
Click here for more details about our JLU Pillow Extension Kit
Jeep Wrangler JLU Rear Plate System is required to install the Seat Delete Plate System.
The 60% Passenger Seat Delete Plate System is a bolt in replacement for the 60% rear seat delete. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points to attach it to the Jeep JLU Rear Plate System, no drilling required. If you are installing just the 60% delete you will need to own or purchase a 60% Seat Delete Bracket. The bracket provides support for the 40% seat. This kit DOES NOT include the Jeep JLU Plate System, or the rear seat delete bracket.
Seat delete bracket can be found here
The 40% Driver Seat Delete Plate System is a bolt in replacement for the driver's side second row seat. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points without drilling and anchor points to attach it to the Jeep JLU Rear Plate System which is required to install the platform.
Second Row Seat Deletes require the Rear Plate System™ be installed in your vehicle as it serves as the main attachment point for seat deletes. Rear Plate System™ is sold separately.
This Plate System is NOT compatible with the Jeep Wrangler 4xe.
Second Row Seat Deletes for 2024 and newer Wranglers have been updated with new support legs. If your Jeep is 2024 or newer, please search the 2024+ listings on our website.
The Goose Gear plate system and sleeping platform for the Jeep JLU are direct bolt in units and require no drilling into your vehicle for model years 2018+. Designed and built with industrial grade plywood and coating using our propriety spray methods for superior durability and wear resistance.
Also makes a great platform for securing your own storage or gear including dog crates, other fridge slide brands, etc. If you have or plan to run an Ursa Minor J30 this also makes a great stepping platform.
The factory 40% seat weighs 32 pounds.
The 40% Seat Delete weighs 21 pounds
The factory 60% seat weighs 63 pounds.
The 60% Seat Delete weighs 28 pounds.
40% Usable Space: Roughly 31" x 19" measured at the top of the plate. However, with the front seat back in the full back position with a typical seat recline, the usable space get reduced to 19" wide x 23" long. Not quite big enough for a typical 35-50 liter refrigerator. Unless you use the front seat in a much more forward position.
60% Usable Space: Roughly 31" x 34" measured at the top of the plate. However, with the front seat back in the full back position with a typical seat recline, the usable space gets reduced to 19" wide x 34" long. Due to the wider width, this product will accommodate a fridge sideways on the delete.
$595.00
Unit price
/
Unavailable
- Fitment verified for YOUR exact year/model/trim
- Not sure? Call +1 772-277-2495 for a real specialist to help you order
- Got install questions? Text a tech who's actually installed this part before, even after it arrives
FREE Shipping
In Stock - Usually ships in 3-5 days
Detecting shipping cost...
Jeep Wrangler 2018-2023 JLU 4 Door - Second Row Seat Delete Plate System - V2 - 40% Drivers is backordered and will ship as soon as it is back in stock.
Goose Gear | SKU:
1484-GGR-SH
Couldn't load pickup availability
Wrong fit or arrives damaged? Free replacement or refund
30,000+ Happy Customers
30-Day Returns
One Year Warranty
Details
Details
Jeep Wrangler 2018-2023 JLU Seat Delete Plate System for the Second Row is available to order for the 60% Passenger Seat and 40% Drivers Seat or can be combined to create a 100% second row delete.
Completely redesigned V2 model. In the redesign of this classic seat delete, we added some features and upgraded the fit and finish. NOTE: The infill panels by each door will be shipped as part of each seat delete. There is no longer a need to order the infill panels separately as was necessary with the V1 seat delete design.
This model is designed to fit into 2018-2023 Model Year Vehicles.
Major Changes to V2:
-
Tighter fitting joints for a cleaner appearance.
-
Infill panel at doorway is now included in the design and has a tighter fit as well.
-
Center support leg is wider to create a better compartment divider.
-
Center support leg now has slotted mounting points for easier installation.
-
Front support leg has been widened and is a tighter fit as well.
-
Front support leg now has our new slotted pillow extension mounting points integrated.
-
Pillow extension is now available as an add on option for our V1 seat delete systems, for those that plan on sleeping in their rigs. With the Pillow extension, you now have 6' of platform length.
Click here for more details about our JLU Pillow Extension Kit
Jeep Wrangler JLU Rear Plate System is required to install the Seat Delete Plate System.
The 60% Passenger Seat Delete Plate System is a bolt in replacement for the 60% rear seat delete. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points to attach it to the Jeep JLU Rear Plate System, no drilling required. If you are installing just the 60% delete you will need to own or purchase a 60% Seat Delete Bracket. The bracket provides support for the 40% seat. This kit DOES NOT include the Jeep JLU Plate System, or the rear seat delete bracket.
Seat delete bracket can be found here
The 40% Driver Seat Delete Plate System is a bolt in replacement for the driver's side second row seat. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points without drilling and anchor points to attach it to the Jeep JLU Rear Plate System which is required to install the platform.
Second Row Seat Deletes require the Rear Plate System™ be installed in your vehicle as it serves as the main attachment point for seat deletes. Rear Plate System™ is sold separately.
This Plate System is NOT compatible with the Jeep Wrangler 4xe.
Second Row Seat Deletes for 2024 and newer Wranglers have been updated with new support legs. If your Jeep is 2024 or newer, please search the 2024+ listings on our website.
The Goose Gear plate system and sleeping platform for the Jeep JLU are direct bolt in units and require no drilling into your vehicle for model years 2018+. Designed and built with industrial grade plywood and coating using our propriety spray methods for superior durability and wear resistance.
Also makes a great platform for securing your own storage or gear including dog crates, other fridge slide brands, etc. If you have or plan to run an Ursa Minor J30 this also makes a great stepping platform.
The factory 40% seat weighs 32 pounds.
The 40% Seat Delete weighs 21 pounds
The factory 60% seat weighs 63 pounds.
The 60% Seat Delete weighs 28 pounds.
40% Usable Space: Roughly 31" x 19" measured at the top of the plate. However, with the front seat back in the full back position with a typical seat recline, the usable space get reduced to 19" wide x 23" long. Not quite big enough for a typical 35-50 liter refrigerator. Unless you use the front seat in a much more forward position.
60% Usable Space: Roughly 31" x 34" measured at the top of the plate. However, with the front seat back in the full back position with a typical seat recline, the usable space gets reduced to 19" wide x 34" long. Due to the wider width, this product will accommodate a fridge sideways on the delete.
Our Guarantee
Our Guarantee
Warranty Assurance:
At K2 Industries, your satisfaction is our priority, and we stand behind the quality of our products. Here's a brief overview of our warranty:
Defect Coverage:
If you find a defect after receiving your order, get in touch with us. We're committed to resolving the issue, whether it involves a replacement, repair, or refund.
Installation Note:
Please inspect your purchase before installation. Unfortunately, damages post-installation are not covered, so ensure everything looks good beforehand.
Claims Made Simple:
Need to make a claim? Reach out to us at support@k2-industries.com. We're here to assist you. Just keep your original packaging and documentation handy.
Your Satisfaction Matters:
Your trust in K2 Industries is appreciated. We're dedicated to ensuring your satisfaction with our quality automotive parts.
Shipping & Returns
Shipping & Returns
Shipping Information:
At K2 Industries, we strive to provide a seamless and efficient shopping experience for automotive enthusiasts like you. Our commitment is to deliver high-quality parts to your doorstep with the utmost care.
Fast and Reliable Shipping:
Many of our products are stocked in our local warehouse, ensuring swift processing and delivery. Orders placed for these items typically ship within 2-5 business days, allowing you to get your parts in no time.
Extended Selection, Global Reach:
To offer you a broader range of automotive parts, some items are sourced from trusted suppliers around the world. While these products might have a slightly longer processing time, we assure you that the wait is worth it for the exceptional quality and value they bring.
Shipping Transparency:
For products shipped internationally, we provide estimated delivery times on the product page. Rest assured, we are continually working to optimize our supply chain and minimize any potential delays.
Combined Shipments:
To streamline your shopping experience, if your order includes items from both our local warehouse and international suppliers, they may be shipped separately. You will receive separate tracking information for each shipment.
Questions or Concerns?
If you have any questions about shipping or would like assistance tracking your order, our dedicated customer support team is here to help. Feel free to reach out to us at support@k2-industries.com.
You can also track your order here
Thank you for choosing K2 Industries for your automotive needs. We appreciate your trust in us.
FAQs
How do I confirm this part fits my vehicle?
Use the vehicle selector at the top of this page to verify fitment. If anything's unclear, send us your year/model/trim (or VIN) via live chat or email support@k2-industries.com — we'll confirm fitment for free, before you commit.
How long until I get my order?
In-stock items typically process in 3-5 business days, then ship — most domestic orders arrive within 3-7 business days after that. Larger freight items take 3-10 days in transit. Some items are made-to-order (carbon fiber, aero kits) and require 10-25 business days of production before shipping — these are marked on the product page.
What if it arrives damaged?
Inspect your shipment when it arrives, take photos of any damage to the box and part, and reach out via live chat or support@k2-industries.com. For freight deliveries, note visible damage on the paperwork before signing. We handle the carrier claim and get you a replacement.
What if I want to return it?
You have 30 days from delivery. As long as the part is uninstalled and in original condition, you can choose between an exchange, store credit (no fees, never expires — our most popular option), or a refund. Drop us a message and we'll walk you through the easiest path.
Can I install this myself, or do I need a shop?
Depends on the part. Some are straightforward DIY, others are body shop or specialist work. Each product page indicates the recommended install path. If you're unsure, message us with your build details and we'll give you a real assessment.
What's the fastest way to reach you?
Live chat and email — typical response time is a few business hours, and you can reach out anytime. Chat with us on the site or email support@k2-industries.com. We resolve issues directly far faster than going through your bank or card processor.
Jeep Wrangler 2018-2023 JLU 4 Door - Second Row Seat Delete Plate S...
From
$595.00
Unit price
/
Unavailable
The K2 Difference
- • Built by enthusiasts who've made every fitment mistake you're afraid of. Now we verify parts for 30,000+ builds a year with zero wrong-part claims.
- • Real specialists answer your questions in minutes, not chatbots reading scripts. We've built the same cars you're building.
- • Freight damage, wrong parts, installation question, we handle it so you don't deal with suppliers or shipping companies.
Built By Someone Who's Been There
Max, the Owner, started in his garage making E36 M3 tail lights in his own oven.
- • Started modifying cars before he could legally drive them
- • Spent years hunting down parts that actually fit and don't suck
- • Made the same fitment mistakes you're afraid of
What You Get With Every Order
Products Selected to Meet Quality & Fitment Standards we Stand Behind.
Get Help From People Who Actually Understand Builds & Fitment.
Designed to Resist UV Exposure, Wear, and Everyday Use.
Join Thousands of Builders Who
Trust K2
What Sets K2 Industries Apart?
We don’t just sell parts. We actually care.
Pre-Order Fitment Verification
Damage Replacement
Real Experts Answer the Phone
Post-Purchase Installation Support
Curated Quality
30-Day Returns
K2 Industries
Other Brands
K2 Industries
Other Brands
Pre-Order Fitment Verification
Damage Replacement
Real Experts Answer the Phone
Post-Purchase Installation Support
Curated Quality
30-Day Returns
Add to Cart
Perfect fit guaranteed
Perfect fit guaranteedFrequently Asked Questions
How do I know this will actually fit my car?
How do I know this will actually fit my car?
Every part listing shows compatible years, models, and trims. But here's the thing—trim packages and factory options can be confusing. If you're not 100% certain, text us at 772-277-2495 with your VIN or photos of your car. We'll verify fitment before you order so you're not stuck with an $800 part that doesn't fit. We've done this for 30,000+ builds. We've seen every weird trim combo and factory option. Takes us 2 minutes to verify, saves you weeks of headaches.
What if the part arrives damaged or is the wrong item?
What if the part arrives damaged or is the wrong item?
We handle it. You don't fight with freight companies or file claims. Text us photos within 48 hours of delivery. If it's damaged or wrong, we ship a replacement immediately. You're not waiting 6 weeks for a freight claim to process. We eat the cost, not you. This is why we package everything like it's going to war. But if something slips through, we fix it ASAP. No forms, no back-and-forth, no "file a claim and wait." Just text us and we handle it.
Can I install this myself or do I need a shop?
Can I install this myself or do I need a shop?
Depends on the part. Emblems, front lips, some spoilers, bolt-on, DIY-friendly, you can do it in your driveway with basic tools. Full bumpers, hoods, wide-body kits, possible for experienced DIYers but most people take them to a shop for paint and install. Check the product description for installation difficulty. If you're unsure, text us. We'll be honest about whether you can handle it or if you should take it to a pro. We'd rather you know upfront than get frustrated halfway through.
What's your return policy if it doesn't fit or I don't like it?
What's your return policy if it doesn't fit or I don't like it?
30 days, unused parts in original packaging. You pay return shipping unless we sent the wrong part or it arrived defective. Once you install it, modify it, paint it, or mount it, we can't take it back. That's why we push so hard on verifying fitment BEFORE you order. We don't want you stuck with something you can't use. Text us before ordering if you're unsure. We'll confirm fitment so you never have to worry about returns.
Do you offer financing?
Do you offer financing?
Yes. Affirm and Shop Pay available at checkout for orders over $50. Split payments over 3-12 months depending on order size. No hard credit check to see your options. Most people use this for big-ticket items like body kits, suspension setups, or wheel/tire packages. Rates vary based on credit. You see the monthly payment before you commit. Makes it easier to build now instead of waiting months to save up.
What if I have questions after I receive the part?
What if I have questions after I receive the part?
Text 772-277-2495. We don't disappear after you buy. Fitment questions, installation issues, "does this bolt go here" questions... we'll walk you through it. We've installed these parts ourselves or helped hundreds of people install them. You're not getting transferred to a call center in the Philippines. You're texting someone who's actually installed your part before. If we can't help remotely, we'll recommend a local shop that knows these parts.
Why should I buy from K2 instead of eBay/Amazon/other sites?
Why should I buy from K2 instead of eBay/Amazon/other sites?
eBay and Amazon sellers don't answer fitment questions. They don't verify your VIN before shipping. They don't handle freight damage claims for you. If something goes wrong, you're filing disputes and waiting weeks. We're builders selling to builders. We verify fitment before you order. We handle damage claims same-day. We answer texts in minutes. We're not the cheapest, but you're not gambling $800 on whether a part fits. You're paying for support, verification, and someone who cares if your build goes sideways.
What does your warranty cover?
What does your warranty cover?
1 year against manufacturing defects: cracking, warping, paint peeling, hardware failure, fitment issues caused by the part being made wrong. Does NOT cover installation damage (you cracked it bolting it on), road damage (curb rash, rock chips), or normal wear. If it breaks because we made it wrong, we replace it free. If it breaks because you hit a parking block, that's on you. We're fair about it. Send photos and we'll tell you honestly if it's covered.
Shipping
Do you ship overseas?
Do you ship overseas?
Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.
How much does shipping cost and when will I see the total?
How much does shipping cost and when will I see the total?
Depending on where you're located, small parts can ship free. Large parts like bumpers, hoods, and body kits require freight shipping. Uou'll see the exact cost at checkout before you pay. Freight usually runs $150-$300 depending on size and your location. We know it's expensive. We negotiate the best rates we can. If you're ordering multiple large parts, text us. We can sometimes combine shipping and save you money. We're not hiding fees in the final step. What you see at checkout is what you pay.
How long will it take to receive my order?
How long will it take to receive my order?
It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.
