2023+ BMW G87 M2 and 2-Series G42 G43 Tail Light Turn Signal / Reverse Pre-cut Overlay Smoked

Customize your 2023+ BMW G87 M2 or 2 Series G42 G43 with our Tail Light Turn Signal / Reverse Pre-cut Overlay Smoked! With 5 different smoked options to choose from, you can easily change up your car's style and create a cohesive and aggressive look for the rear-end. Stand out on the road and make a strong statement with our premium overlay.

• Fitment: For 2023+ G87 BMW M2 and 2-Series G42 G43 Rear Taillight Turn/Reverse Signal Overlay 
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Offered in Smoke Out, Light Smoke, JDM Yellow, Cherry Red, or Blue Smoke 
• Easy Application, Peel and Stick.
• Comes in Pair (left and Right Tint for Tail Light)
• NOTE ** This is not an actual Tail Light replacement, it is a vinyl overlay.

How to Install

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your taillight to get rid of debris prior to application
2. Peel off Tail light Tint Overlay
3. Align the tail light from the edge closest to the middle of the rear bumper
4. Make sure you have a padded card or soft glove to put on your fingers to begin applying the overlay on the light. If not, your fingers will work
5. If using your fingers, start from the pointy/curved edge of the overlay working your way towards the other edge of the tail light that is closest to the outside of the car (left or right)
6. Use one hand to guide the way the overlay will lay as there will be a bump the overlay will have to go upwards and cover
7. This area will require some "heat" for the non-experience, otherwise make sure you have enough slack to lay the portions that are flat first then work on the bump.
8. Once laid, there will be bubbles in the area where the bump is.
9. Use a heat gun or blow dryer and aim it at the bump area to make it a bit more malleable to install over the bump.
10. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
11. If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge
12. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
13. For the Best application, use water underneath and squeegee out the water once the desired placement is met. (This Method only works if the backing has Oracle on it)