PRE-BLACK FRIDAY SALE · Up to 30% off, already applied · No code · Shop now → Pre-Black Friday: up to 30% off, no code →
Ask a Sales Tech

Ask a Sales Tech

USA Based. Verify parts fit & get product recommendations

Mon–Fri: 9 AM–5 PM EST

support@k2-industries.com Or ask via live chat

Porsche 992.1 Carrera+ Exhaust System & Race Headers - Yonristic Performance

$2,699.00
Available to order Check product details for shipping time
Shipping confirmed at checkout.
Yonristic Performance  |  SKU: YR-6742-POR-AIS
USA-based support Secure checkout Return policy

Questions on fit or freight? Ask our parts team · Mon–Fri 9–5 ET

Unlock Ultimate Performance with the Porsche 992.1 Carrera Exhaust System

The 992.1 Carrera family wraps a brilliant 3.0-liter twin-turbo flat-six in an exhaust tuned for quiet compliance. That stock center canister and dense routing soak up character and add backpressure that blunts mid-range response. Our system deletes the muffler entirely and replaces it with a precision center X-pipe flanked by tuned side-branch (Helmholtz) resonators—a motorsport layout that cleans the tone and kills drone without stuffing the flow through packing material. The result is a factory+ soundtrack: crisp and exotic under load, composed and conversation-friendly at cruise.

Design & Sound (what you see in the photos)

  • True Center X-Pipe: The crossover sits right where both banks meet, equalizing pressure and timing pulses for a smoother, higher-clarity note and better scavenging as revs rise.

  • Two Side-Branch Resonators (no mufflers): Those golden cylindrical branches are Helmholtz chambers tuned to cancel the dominant cabin-boom frequencies of the 992 (low-rpm, high-load). You get aggression outside, without the inside drone.

  • Straight-Through Tail Sections with PSE Brackets: The rear tubes are unpacked and free-flowing and retain factory PSE valve actuator mounts, so you keep OEM valve behavior (or add our remote kit on non-PSE cars).

  • Pack-free durability: With zero muffler packing to degrade, the tone stays consistent and heat management improves.

Materials & Craftsmanship

  • Available in AISI 304 stainless steel or heat-treated titanium (as pictured).

  • 3D-scanned for exact underbody geometry; CNC-machined flanges and brackets.

  • Mandrel bends maintain cross-section; back-purged TIG welds keep the internal surface smooth for velocity and crack resistance.

Performance — realistic expectations

On the 992.1 3.0TT, a high-flow, muffler-less X-pipe cat-back typically yields ~+8–12 whp / +8–12 lb-ft with noticeably sharper transient response (more with sport cats and a calibration). The big win here is sound quality + weight reduction versus the large OEM center canister.

Fitment & Options

  • Models: 2020–2024 992.1 Carrera / Carrera T / Carrera S / Carrera GTS / Carrera 4S (coupe & cabrio).

  • Valve Control: Works plug-and-play with PSE valves; optional remote valve kit available for non-PSE cars.

  • Tips: Quad finishes—polished, black chrome, burnt, or carbon fiber.

  • Install: 100% bolt-on and reversible; uses factory mounts.

Why this layout wins

By replacing the center muffler with a pure X-pipe and using targeted side-branch cancellation instead of stuffing and baffles, this system gives the 992 the voice enthusiasts want—cleaner harmonics, quicker spool feel, and no highway drone—while shaving weight and retaining full OEM valve functionality.

 

The Porsche 992.1 Carrera exhaust system from Yonristic Performance is engineered to elevate your driving experience with superior craftsmanship and race-inspired technology. Designed specifically for the Porsche 992.1 Carrera, this exhaust system optimizes airflow and enhances engine sound for exhilarating performance gains. Featuring high-quality materials and precision-engineered race headers, this system delivers both durability and aggressive tone. Whether you’re on the track or cruising city streets, the Porsche 992.1 Carrera exhaust system ensures responsive throttle feedback and a distinctive exhaust note that turns heads. Transform your Porsche into a powerhouse with this premium exhaust upgrade.

What to know before you install
Bolt-on install Install Type Bolt-on
Install requirement Requirement Basic tools
Carbon fiber Material Carbon fiber
What to expect
Most intake and exhaust parts are bolt-on, but rusted hardware, tight access, and sensor placement can affect install time.
Shipping, returns & warranty

Wrong item or delivery damage? Contact our team for help with your order.

Inspect your part before signing for it and note any damage on the delivery receipt.

Fitment: Vehicle fitment is listed in the title and description. Check the model years, trim and installation notes before ordering.

Check vehicle compatibility

Check the product fitment notes for your year, model and trim

Need help choosing?

Not sure? Email support@k2-industries.com for a real specialist to help you order

Installation questions?

Installation questions? Email our team before or after your purchase

Warranty details

Questions about warranty coverage? Our team can walk you through it. Contact us

Return policy

See the return policy for this item’s details. Questions? We’re happy to help before you order.

Read return policy · Contact us

Shipping & Returns

Shipping Information:

At K2 Industries, we strive to provide a seamless and efficient shopping experience for automotive enthusiasts like you. Our commitment is to deliver high-quality parts to your doorstep with the utmost care.

Fast and Reliable Shipping:
Many of our products are stocked in our local warehouse, ensuring swift processing and delivery.

Extended Selection, Global Reach:
To offer you a broader range of automotive parts, some items are sourced from trusted suppliers around the world. While these products might have a slightly longer processing time, we assure you that the wait is worth it for the exceptional quality and value they bring.

Shipping Transparency:
For products shipped internationally, we provide estimated delivery times on the product page. Rest assured, we are continually working to optimize our supply chain and minimize any potential delays.

Combined Shipments:
To streamline your shopping experience, if your order includes items from both our local warehouse and international suppliers, they may be shipped separately. You will receive separate tracking information for each shipment.

Questions or Concerns?
If you have any questions about shipping or would like assistance tracking your order, our dedicated customer support team is here to help. Feel free to reach out to us at support@k2-industries.com.

You can also track your order here

Thank you for choosing K2 Industries for your automotive needs. We appreciate your trust in us.

FAQs

Will this require a tune after installation?

Bolt-ons like exhaust tips, cat-backs, and basic intakes usually don't. Larger mods — turbo upgrades, supercharger kits, headers — typically need an ECU tune to run safely. The spec sheet indicates if tuning is recommended.

Is this part emissions / CARB compliant?

If you're in California or another CARB-regulated state, check the CARB status on this page before ordering. Many performance parts are off-road or competition use only — if so, we say it clearly.

Will installing this void my factory warranty?

Modifications can affect manufacturer warranty on related components only — not your entire warranty. The Magnuson-Moss Warranty Act protects you from blanket warranty voids. If warranty matters to you, talk to your dealer before installing.

Can I install this myself?

Depends on the part. Bolt-ons are DIY-friendly. Turbo upgrades, headers, and supercharger kits need a professional shop. The product description gives a difficulty estimate.

See Why Customers Love K2 Industries

Customer Reviews

Overall rating: 4.5 / 5 from 995 reviews.

Customer video review of Shipping Insurance

Product came quick and fit great. I love it.

Shipping Insurance

Customer photo review of Shipping Insurance

Roof rails a proper fit for my Ford Transit Connect - SWB. Some concern about the threaded connectors, wondering if rivnuts might offer stronger attachment.

Shipping Insurance

Customer video review of Shipping Insurance

GREAT EXPERIENCE SHIPPING WAS QUICK IM ENJOYING THE PRODUCT

Shipping Insurance

Customer photo review of NTXGlow RGB Tail Lights (2015-2023 Ford Mustang)

Took 2 weeks to deliver with standard shipping. But well worth the wait. Install took 25 minutes with minimal tools and the lights look amazing. Fitment is perfect and the quality is excellent. Its kinda pricey but you get what you pay for with ntxglow products. Highly recommend!

NTXGlow RGB Tail Lights (2015-2023 Ford Mustang)

Customer photo review of Shipping Insurance

Wing came in perfect condition! No chip paint, no scratches. Amazing service!

Shipping Insurance

Customer photo review of Spec-D Projector Headlights Ford F150 (04-08) Mark LT (06-08) Halo Black / Smoked / Chrome

They look amazing, and after using ChatGPT to help me understand how to install them (because the instructions were not very helpful whatsoever), I’m glad with how they turned out. My problems are that the lights aren’t too bright, the instructions weren’t helpful, and the arrival date was wrong, even if they arrived early.

Spec-D Projector Headlights Ford F150 (04-08) Mark LT (06-08) Halo Black / Smoked / Chrome

Customer photo review of 1993-1997 Honda Del Sol Redclear Tail Light Lenses

This isn’t on K2, but the lenses came In which I was thrilled about. I’d already removed my OEM lenses from their housings. The passenger side lense fit well and mostly flush. The driver side, however, looks like it was slightly warped and caused poor fitment and what looks like a small dip in the red portion of the lense. I had no choice but to use them, as my OEM lenses were no longer usable. It can be very difficult to get replacement lenses in a timely manner for a Del Sol. I drive my car everyday, so I had to just go with it. Again, not a K2 issue but presumably the manufacturer.

1993-1997 Honda Del Sol Redclear Tail Light Lenses

Customer video review of 2003-2008 Nissan 350Z N4 Style Rear Bumper Cover - FRP

This rear bumper fits great the only thing is the trunk button on the bottom is cut a little to wide but that’s an easy fix it looks great and definitely makes the rear look more aggressive. I love it!

2003-2008 Nissan 350Z N4 Style Rear Bumper Cover - FRP

Customer photo review of Upgraded VANOS Oil Supply Line – M52 / M54 Engines (E36, E46, E39, E60, X3, X5, Z3, Z4)

The box was a little crushed, but the line was packed well and it wasn't a problem. The instructions are 3 pages of color pictures and lots of explanations. Very nice. The line itself is a very nice bit of kit with a swivel AN line end that allows a No-tension install. No leaks so far and it looks great. It came with new banjo bolts and copper crush washers. The only criticism I have is that I would have liked this hose coated in black so it disappears like the original, but it does look good, so I don't mind.

Upgraded VANOS Oil Supply Line – M52 / M54 Engines (E36, E46, E39, E60, X3, X5, Z3, Z4)

What You Get With Every Order

Products Selected to Meet Quality & Fitment Standards we Stand Behind.
Products Selected to Meet Quality & Fitment Standards we Stand Behind.
Get Help From People Who Actually Understand Builds & Fitment.
Get Help From People Who Actually Understand Builds & Fitment.
Designed to Resist UV Exposure, Wear, and Everyday Use.
Designed to Resist UV Exposure, Wear, and Everyday Use.
Join Thousands of Builders Who
Trust K2
Join Thousands of Builders Who Trust K2

What Sets K2 Industries Apart?

We don’t just sell parts. We actually care.
Pre-order fitment help
Carrier claims handled for you
Real Experts Answer the Phone
Post-Purchase Installation Support
Curated Quality
Return policy
K2 Industries
Other Brands
Check seller terms
K2 Industries
Other Brands
Pre-order fitment help
Carrier claims handled for you
Real Experts Answer the Phone
Post-Purchase Installation Support
Curated Quality
Return policy
Check seller terms
Add to Cart
GuaranteeCheck compatibility before ordering

The K2 Difference

  • • Check the product fitment notes and contact our team if you need help confirming compatibility before ordering.
  • • Real specialists, not chatbots reading scripts. We've built the same cars you're building.
  • • Freight damage, wrong parts, installation question, we handle it so you don't deal with suppliers or shipping companies.

Find your next upgrade

Browse Porsche parts
Vehicle build featured by K2 Industries

Frequently Asked Questions

How do I know this will actually fit my car?

Every part listing shows compatible years, models, and trims. But here's the thing—trim packages and factory options can be confusing. If you're not 100% certain, text us at 772-277-2495 with your VIN or photos of your car. We've done this for 30,000+ builds. We've seen every weird trim combo and factory option.

What if the part arrives damaged or is the wrong item?

Inspect your part before you sign for it and note any damage on the delivery receipt. Then email support@k2-industries.com with photos within 48 hours of delivery. Our team handles it with the carrier and the supplier, so you don't have to.

Can I install this myself or do I need a shop?

Depends on the part. Emblems, front lips, some spoilers, bolt-on, DIY-friendly, you can do it in your driveway with basic tools. Full bumpers, hoods, wide-body kits, possible for experienced DIYers but most people take them to a shop for paint and install. Check the product description for installation difficulty. If you're unsure, text us. We'll be honest about whether you can handle it or if you should take it to a pro. We'd rather you know upfront than get frustrated halfway through.

What's your return policy if it doesn't fit or I don't like it?

Return policy

See the return policy for this item’s details. Questions? We’re happy to help before you order.

Read return policy · Contact us

Do you offer financing?

Yes. Affirm and Shop Pay available at checkout for orders over $50. Split payments over 3-12 months depending on order size. No hard credit check to see your options. Most people use this for big-ticket items like body kits, suspension setups, or wheel/tire packages. Rates vary based on credit. You see the monthly payment before you commit. Makes it easier to build now instead of waiting months to save up.

What if I have questions after I receive the part?

Text 772-277-2495. We don't disappear after you buy. Fitment questions, installation issues, "does this bolt go here" questions... we'll walk you through it. We've installed these parts ourselves or helped hundreds of people install them. You're not getting transferred to a call center in the Philippines. You're texting someone who's actually installed your part before. If we can't help remotely, we'll recommend a local shop that knows these parts.

Why should I buy from K2 instead of eBay/Amazon/other sites?

eBay and Amazon sellers don't answer fitment questions. They don't verify your VIN before shipping. They don't handle freight damage claims for you. If something goes wrong, you're filing disputes and waiting weeks. We're builders selling to builders. We're not the cheapest, but you're not gambling $800 on whether a part fits. You're paying for support, verification, and someone who cares if your build goes sideways.

What does your warranty cover?

Warranty details

Questions about warranty coverage? Our team can walk you through it. Contact us

Shipping

Do you ship overseas?

Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout.

How much does shipping cost and when will I see the total?

Depending on where you're located, small parts can ship free. Large parts like bumpers, hoods, and body kits require freight shipping. You'll see the exact cost at checkout before you pay. Freight usually runs $150-$300 depending on size and your location. We know it's expensive. We negotiate the best rates we can. If you're ordering multiple large parts, text us. We can sometimes combine shipping and save you money. We're not hiding fees in the final step. What you see at checkout is what you pay.

How long will it take to receive my order?

It depends on where you are. Delivery details will be provided in your confirmation email.

Built By Someone Who's Been There

Max, the Owner, started in his garage making E36 M3 tail lights in his own oven.

  • • Started modifying cars before he could legally drive them
  • • Spent years hunting down parts that actually fit and don't suck
  • • Made the same fitment mistakes you're afraid of
Founder photo