{"product_id":"bevinsee-aluminum-rear-tunnel-brace-for-vw-for-golf-7-for-vw-passat-b8-jetta-for-audi-a3-8v-8y-q2-for-seat-replace-for-5q0802128","title":"VW MQB Platform 8mm Billet Aluminium Rear Tunnel Brace for Golf MK7 \/ MK8 \/ Passat B8 \/ Jetta \/ Arteon \/ T-Roc \/ Taos \u0026 Audi A3 8V \/ 8Y \/ Q2 \u0026 SEAT Leon \/ Ateca \/ Formentor \u0026 Skoda Octavia \/ Superb \/ Karoq (FWD \/ AWD \/ Replaces 5Q0802128)","description":"\u003cp\u003eReinforce the chassis on your MQB-platform VW, Audi, SEAT, or Skoda with this premium 8mm billet aluminum rear tunnel brace, precision crafted from 6061 aircraft-grade aluminum for permanent durability and dramatically improved chassis stiffness compared to the failure-prone factory stamped-steel component. The factory rear tunnel brace on MQB-platform vehicles is a thin stamped-steel piece that provides minimal structural reinforcement and frequently obstructs the installation of larger aftermarket exhaust pipes. This billet aluminum upgrade replaces the weak factory component with a substantially thicker 8mm aluminum structure that simultaneously addresses two needs: (1) significantly improving chassis rigidity by reinforcing one of the body's weaker structural points, reducing chassis flex under cornering and high-load driving, and (2) providing the necessary clearance for larger aftermarket exhaust pipes that the factory brace blocks. Easy bolt-on installation requires no drilling or cutting, and the upgraded brace introduces no additional cabin noise, vibration, or comfort compromises.\u003c\/p\u003e\n\u003ch6\u003eFeatures:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect aftermarket exhaust pipe clearance – provides the clearance needed to install larger aftermarket exhaust systems that the factory tunnel brace obstructs\u003c\/li\u003e\n\u003cli\u003eEnhanced chassis strength – upgraded from thin stamped-steel factory construction to substantial 8mm thick 6061 aluminum alloy, dramatically reinforcing one of the body's weaker structural points\u003c\/li\u003e\n\u003cli\u003eReduced chassis flex – the rigid aluminum construction reduces chassis flex under sustained cornering loads, hard launches, and aggressive driving\u003c\/li\u003e\n\u003cli\u003eEasy bolt-on installation – no drilling, cutting, or modification required, installs directly to factory mounting points\u003c\/li\u003e\n\u003cli\u003eNo NVH compromise – delivers improved chassis rigidity without introducing additional cabin noise, vibration, or ride harshness\u003c\/li\u003e\n\u003cli\u003eAnodized surface finish – delivers superior rust-proof durability and a clean professional aesthetic\u003c\/li\u003e\n\u003cli\u003eColor options available – choose from black, red, or blue to match your build theme or engine bay aesthetic\u003c\/li\u003e\n\u003cli\u003eIncludes high-strength serrated flange nuts – complete installation hardware ready for direct assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: 100% Brand New\u003c\/li\u003e\n\u003cli\u003eType: Rear Tunnel Brace\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061 Aircraft-Grade Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC Machined\u003c\/li\u003e\n\u003cli\u003eThickness: 8mm\u003c\/li\u003e\n\u003cli\u003eSurface Finish: Anodized\u003c\/li\u003e\n\u003cli\u003eAvailable Colors: Black \/ Red \/ Blue\u003c\/li\u003e\n\u003cli\u003eItem Weight: 0.390 kg\u003c\/li\u003e\n\u003cli\u003eQuantity: Complete Brace Kit (Brace + 4 Serrated Flange Nuts)\u003c\/li\u003e\n\u003cli\u003eMounting Hardware: M8 x 1.25 Serrated Flange Nuts (4 included)\u003c\/li\u003e\n\u003cli\u003eTightening Torque: 20 Nm\u003c\/li\u003e\n\u003cli\u003ePosition: Rear Chassis Tunnel\u003c\/li\u003e\n\u003cli\u003ePurpose: Performance Upgrade \/ Chassis Reinforcement \/ Exhaust Clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eOE \/ Replacement Part Numbers:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e5Q0802128\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eCritical Compatibility Notes:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVW MQB platform only:\u003c\/strong\u003e Compatible with FWD and AWD MQB-platform vehicles only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeft-hand drive only:\u003c\/strong\u003e Designed specifically for left-hand-drive vehicles – will not fit right-hand-drive vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory part number verification:\u003c\/strong\u003e Confirm your factory tunnel brace is part number 5Q0802128 before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eVolkswagen Fitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eVW Arteon 3H (2017 – Up)\u003c\/li\u003e\n\u003cli\u003eVW Golf VII 5G Saloon (2013 – 2017)\u003c\/li\u003e\n\u003cli\u003eVW Golf VII 5G (2018 – Up)\u003c\/li\u003e\n\u003cli\u003eVW Golf VII Variant BA Estate (2014 – 2017)\u003c\/li\u003e\n\u003cli\u003eVW Golf VII BQ (2017 – 2020)\u003c\/li\u003e\n\u003cli\u003eVW Golf VIII CD (2020)\u003c\/li\u003e\n\u003cli\u003eVW Golf VIII CD Saloon (2020 – Up)\u003c\/li\u003e\n\u003cli\u003eVW Golf VIII CD Estate (2021 – Up)\u003c\/li\u003e\n\u003cli\u003eVW Golf Sportsvan AM (2014 – 2020)\u003c\/li\u003e\n\u003cli\u003eVW Jetta \/ Syncro BU (2020 – 2022)\u003c\/li\u003e\n\u003cli\u003eVW Passat B8 3G (2018 – 2024)\u003c\/li\u003e\n\u003cli\u003eVW T-Roc Convertible AC (2020 – Up)\u003c\/li\u003e\n\u003cli\u003eVW T-Roc A1 (2018 – Up)\u003c\/li\u003e\n\u003cli\u003eVW Taos CP (2021 – 2023)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eAudi Fitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A3 Cabriolet 8V (2015 – 2016)\u003c\/li\u003e\n\u003cli\u003eAudi A3 Cabriolet 8V (2017 – 2021)\u003c\/li\u003e\n\u003cli\u003eAudi A3 Saloon \/ Sportback 8V (2013 – 2016)\u003c\/li\u003e\n\u003cli\u003eAudi A3 Saloon \/ Sportback 8V (2017 – 2020)\u003c\/li\u003e\n\u003cli\u003eAudi A3 Saloon \/ Sportback 8Y (2020 – Up)\u003c\/li\u003e\n\u003cli\u003eAudi Q2 GA (2017 – Up)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSEAT Fitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eSEAT Ateca KH (2016 – Up)\u003c\/li\u003e\n\u003cli\u003eSEAT Formentor KM (2021 – Up)\u003c\/li\u003e\n\u003cli\u003eSEAT Leon 5F (2013 – 2016)\u003c\/li\u003e\n\u003cli\u003eSEAT Leon 5F (2017 – 2020)\u003c\/li\u003e\n\u003cli\u003eSEAT Leon KL (2020 – Up)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSkoda Fitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eSkoda Karoq ND (2018 – Up)\u003c\/li\u003e\n\u003cli\u003eSkoda Octavia 5E (2018 – 2021)\u003c\/li\u003e\n\u003cli\u003eSkoda Octavia 5E Saloon \/ Estate (2014 – 2017)\u003c\/li\u003e\n\u003cli\u003eSkoda Octavia 5E Saloon \/ Estate (2017 – 2021)\u003c\/li\u003e\n\u003cli\u003eSkoda Octavia NN (2020 – Up)\u003c\/li\u003e\n\u003cli\u003eSkoda Superb 3V Sedan \/ Estate (2015 – Up)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with FWD and AWD MQB-platform vehicles using factory tunnel brace part number 5Q0802128\u003c\/li\u003e\n\u003cli\u003eConfirm vehicle model, drivetrain configuration (FWD\/AWD), drive side (LHD only), and factory part number before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eContents:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x 8mm Billet Aluminum Rear Tunnel Brace\u003c\/li\u003e\n\u003cli\u003e4x M8 x 1.25 Serrated Flange Nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eBenefits:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eSignificantly improves chassis rigidity – the 8mm aluminum construction provides dramatically more reinforcement than the thin factory stamped-steel original, reducing chassis flex under cornering and high-load driving\u003c\/li\u003e\n\u003cli\u003eEnables larger aftermarket exhaust pipe installation – the redesigned brace geometry provides clearance for performance exhaust systems that the factory brace obstructs\u003c\/li\u003e\n\u003cli\u003eReduces flexion at one of the body's weaker structural points – the rear tunnel area is a known weak point on MQB-platform vehicles\u003c\/li\u003e\n\u003cli\u003eImproves handling consistency under sustained loads – critical for track day, autocross, and spirited street driving where chassis stiffness directly affects predictable response\u003c\/li\u003e\n\u003cli\u003e6061 aircraft-grade aluminum construction permanently outlasts the factory stamped-steel component – will not corrode, fatigue, or fail under sustained loads\u003c\/li\u003e\n\u003cli\u003eAnodized finish maintains the premium aluminum appearance and corrosion resistance for the lifetime of the vehicle\u003c\/li\u003e\n\u003cli\u003eColor options enable build theme coordination – black for stealthy builds, red or blue for accent-themed builds\u003c\/li\u003e\n\u003cli\u003eEasy bolt-on installation enables straightforward DIY upgrade without specialized tools\u003c\/li\u003e\n\u003cli\u003eNo NVH penalty – unlike some chassis stiffening modifications, this brace doesn't introduce harsh ride quality or cabin noise\u003c\/li\u003e\n\u003cli\u003eWide cross-platform compatibility makes this versatile for VAG enthusiasts who manage multiple MQB-platform vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eInstallation Notes:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive side verification:\u003c\/strong\u003e This brace fits LEFT-HAND DRIVE vehicles only – will not fit right-hand-drive applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrivetrain compatibility:\u003c\/strong\u003e Compatible with both FWD and AWD MQB-platform vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory part number verification:\u003c\/strong\u003e Confirm your factory tunnel brace is part number 5Q0802128 before ordering – verify by inspecting the existing brace\u003c\/li\u003e\n\u003cli\u003eProperly support the rear of the vehicle on jack stands rated for the vehicle weight before beginning installation – never work under a vehicle supported only by a jack\u003c\/li\u003e\n\u003cli\u003eLocate the rear tunnel brace on the underside of the vehicle near the rear differential or fuel tank area\u003c\/li\u003e\n\u003cli\u003eCarefully remove the factory tunnel brace by loosening and removing the factory mounting bolts\u003c\/li\u003e\n\u003cli\u003ePosition the new aluminum brace using the factory mounting points\u003c\/li\u003e\n\u003cli\u003eInstall the new brace using the included M8 x 1.25 serrated flange nuts\u003c\/li\u003e\n\u003cli\u003eTighten all mounting hardware to 20 Nm torque using a calibrated torque wrench\u003c\/li\u003e\n\u003cli\u003eVerify proper brace alignment and clearance with surrounding chassis components\u003c\/li\u003e\n\u003cli\u003eTest drive at low speeds before aggressive driving – verify no unusual noises or chassis behavior\u003c\/li\u003e\n\u003cli\u003eIf installing alongside a larger aftermarket exhaust system, verify proper exhaust clearance after both installations are complete\u003c\/li\u003e\n\u003cli\u003eInspect installation periodically for any signs of loosening from sustained driving vibration\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended if you are unfamiliar with chassis modification procedures\u003c\/li\u003e\n\u003cli\u003eIf unsure about compatibility with your specific VW, Audi, SEAT, or Skoda variant, drivetrain configuration, or drive side, contact our team with your year, model, drivetrain (FWD\/AWD), and drive side (LHD\/RHD) before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e12-month standard warranty from date of purchase\u003c\/li\u003e\n\u003cli\u003eContact our support team for assistance with any issues\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Black","offer_id":46024693907690,"sku":"1005009714803266-black","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":46056994439402,"sku":"1005009714803266-Blue","price":79.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":46056994472170,"sku":"1005009714803266-Red","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/S36c6217149994db5b44325f671a6d9a9A.webp?v=1777924217","url":"https:\/\/www.k2-industries.com\/en-my\/products\/bevinsee-aluminum-rear-tunnel-brace-for-vw-for-golf-7-for-vw-passat-b8-jetta-for-audi-a3-8v-8y-q2-for-seat-replace-for-5q0802128","provider":"K2 Industries","version":"1.0","type":"link"}