{"product_id":"bevinsee-aluminium-rear-sway-bar-link-kit-for-toyota-4runner-2003-2024-for-toyota-fj-cruiser-2007-2014-replace-for-48830-60030","title":"Toyota 4Runner \u0026 FJ Cruiser Billet Aluminum Adjustable Rear Sway Bar End Link Kit 2003 - 2024 (137.5mm - 180mm Adjustable Length \/ Replaces 48830-60030)","description":"\u003cp\u003eRestore proper rear sway bar geometry on your lifted Toyota 4Runner or FJ Cruiser with this premium billet aluminum adjustable rear sway bar end link kit, precision CNC-machined for permanent durability and full geometric correction across the entire factory and lifted suspension range. The factory rear sway bar end links on 4Runner and FJ Cruiser are fixed-length components designed for stock ride height — once you install a 1\", 2\", 3\", or larger lift kit, the lifted suspension geometry pushes the sway bar out of its proper neutral position, causing it to operate under preload at static ride height rather than parallel to the ground. The result is uneven sway bar action, premature bushing wear, increased chassis noise, and compromised handling characteristics that worsen as lift height increases. This adjustable end link kit solves the problem with infinite length adjustability from 137.5mm to 180mm, allowing precise compensation for any lift height while maintaining proper sway bar neutral position. Suitable for factory ride height (with adjustment range from -2.5mm) through aggressively lifted overland and off-road builds (up to +40mm).\u003c\/p\u003e\n\u003ch6\u003eFeatures:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eSturdy and durable construction – billet aluminum material delivers exceptional strength with thicker connecting rod structure that doesn't significantly increase weight\u003c\/li\u003e\n\u003cli\u003eCNC machined precision – ensures precise thread quality, refined appearance, and perfect fitment to factory mounting points\u003c\/li\u003e\n\u003cli\u003eAnodized surface finish – delivers superior corrosion resistance and a clean professional aesthetic for sustained underbody and weather exposure\u003c\/li\u003e\n\u003cli\u003eAdjustable ball head design – suitable for both factory and lifted modified vehicles, supports direct adjustment on the vehicle\u003c\/li\u003e\n\u003cli\u003eWide adjustment range – 137.5mm to 180mm overall length (-2.5mm to +40mm based on factory 140mm length)\u003c\/li\u003e\n\u003cli\u003ePremium polyurethane bushings – more durable and aging-resistant than ordinary rubber, eliminating the recurring failure mode of factory rubber bushings\u003c\/li\u003e\n\u003cli\u003eDirect OE replacement design – installs to factory sway bar mounting points without modification\u003c\/li\u003e\n\u003cli\u003eWide compatibility – fits the entire 4Runner production range and FJ Cruiser lineup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: 100% Brand New\u003c\/li\u003e\n\u003cli\u003eType: Adjustable Rear Sway Bar End Link Kit\u003c\/li\u003e\n\u003cli\u003eMaterial: Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC Machined\u003c\/li\u003e\n\u003cli\u003eSurface Finish: Anodized\u003c\/li\u003e\n\u003cli\u003eBushing Material: Polyurethane\u003c\/li\u003e\n\u003cli\u003eAdjustable Length Range: 137.5mm – 180mm\u003c\/li\u003e\n\u003cli\u003eAdjustment Range from Factory: -2.5mm to +40mm (based on factory 140mm)\u003c\/li\u003e\n\u003cli\u003eItem Weight: 0.92 kg\u003c\/li\u003e\n\u003cli\u003eQuantity: Complete Pair (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003ePosition: Rear Sway Bar Connection\u003c\/li\u003e\n\u003cli\u003ePurpose: Suspension Geometry Correction \/ Lift Compensation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eOE \/ Replacement Part Numbers:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e48830-60030\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eFitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eToyota 4Runner (2003 – 2024)\u003c\/li\u003e\n\u003cli\u003eToyota FJ Cruiser (2007 – 2014)\u003c\/li\u003e\n\u003cli\u003eCompatible with both factory ride height and lifted suspension configurations\u003c\/li\u003e\n\u003cli\u003eCompatible with lift kits up to approximately 40mm (1.5\") additional rear ride height beyond factory specification\u003c\/li\u003e\n\u003cli\u003eConfirm vehicle model, production year, and lift configuration before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eContents:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable Rear Sway Bar End Link Kit (Pair)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eBenefits:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eRestores proper rear sway bar geometry across factory and lifted ride heights – the adjustable length compensates for lift kit modifications, ensuring the sway bar operates parallel to the ground in static position\u003c\/li\u003e\n\u003cli\u003eEliminates the chassis noise, uneven sway bar action, and premature bushing wear caused by improper sway bar geometry on lifted vehicles\u003c\/li\u003e\n\u003cli\u003eImproves handling consistency on lifted 4Runner and FJ Cruiser builds – proper sway bar geometry allows the suspension to articulate correctly while maintaining body control\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings dramatically outlast factory rubber bushings – the polyurethane construction resists aging, weather degradation, and load fatigue\u003c\/li\u003e\n\u003cli\u003eBillet aluminum construction provides permanent dimensional stability – will not bend, crack, or fail under sustained off-road loads where factory stamped steel links can deform\u003c\/li\u003e\n\u003cli\u003eWide 42.5mm adjustment range covers virtually any reasonable rear lift height – from factory through aggressive overland and off-road lifts\u003c\/li\u003e\n\u003cli\u003eAnodized finish provides long-term corrosion resistance for vehicles regularly exposed to mud, water, and salt during off-road use\u003c\/li\u003e\n\u003cli\u003ePairs naturally with front sway bar relocation kit and other suspension geometry correction products for comprehensive lifted suspension optimization\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eInstallation Notes:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift compensation guidance:\u003c\/strong\u003e Adjust the link length to maintain the rear sway bar in a neutral position (parallel to the ground) at static ride height. The amount of length adjustment needed depends on your specific lift height – consult your lift kit manufacturer for recommended adjustment values\u003c\/li\u003e\n\u003cli\u003eProperly support the rear of the vehicle on jack stands rated for the vehicle weight before beginning installation – never work under a vehicle supported only by a jack\u003c\/li\u003e\n\u003cli\u003eAllow the rear suspension to hang freely or position at static loaded ride height per included instructions for proper installation reference\u003c\/li\u003e\n\u003cli\u003eLoosen the factory sway bar end link mounting hardware before removal to ensure smooth replacement\u003c\/li\u003e\n\u003cli\u003eCarefully remove the factory rubber-bushed end links – inspect for damage and dispose properly\u003c\/li\u003e\n\u003cli\u003ePre-set the new adjustable end links to your estimated length based on your lift height before installation – minor adjustments can be made on the vehicle after initial installation\u003c\/li\u003e\n\u003cli\u003eInstall the adjustable end links using factory mounting hardware where possible\u003c\/li\u003e\n\u003cli\u003eTighten all sway bar mounting hardware to factory torque specifications using a calibrated torque wrench\u003c\/li\u003e\n\u003cli\u003eVerify the sway bar position with the vehicle at static ride height – the bar should be approximately parallel to the ground without preload\u003c\/li\u003e\n\u003cli\u003eAdjust link length as needed to achieve proper neutral position – longer links for higher lifts, shorter links for lower ride heights\u003c\/li\u003e\n\u003cli\u003eTest handling and chassis behavior at low speeds before aggressive driving – verify smooth sway bar operation through full suspension travel\u003c\/li\u003e\n\u003cli\u003ePeriodically inspect end link tightness and adjust if any settling occurs over the first 100-200 miles after installation\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended if you are unfamiliar with suspension modification procedures\u003c\/li\u003e\n\u003cli\u003eIf unsure about compatibility with your specific 4Runner or FJ Cruiser variant or lift configuration, contact our team with your year, model, lift height, and current suspension configuration before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e12-month standard warranty from date of purchase\u003c\/li\u003e\n\u003cli\u003eContact our support function for assistance with any issues\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Black","offer_id":46024649900266,"sku":"1005010322509682-black","price":189.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":46056994570474,"sku":"1005010322509682-Red","price":189.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/S7d3c8d7d0da049af9dfa0456b53a3f9fM.webp?v=1777914996","url":"https:\/\/www.k2-industries.com\/en-hk\/products\/bevinsee-aluminium-rear-sway-bar-link-kit-for-toyota-4runner-2003-2024-for-toyota-fj-cruiser-2007-2014-replace-for-48830-60030","provider":"K2 Industries","version":"1.0","type":"link"}