{"product_id":"bevinsee-front-sway-bar-relocation-kit-for-toyota-4runner-2010-2024-for-toyota-fj-cruiser-2010-2014-replace-for-48824-60190","title":"Toyota 4Runner \u0026 FJ Cruiser Billet Aluminium Front Sway Bar Relocation Kit for 2\"+ Lift Setups 2010 - 2024 (Non-KDSS Models \/ Replaces 48824-60190)","description":"\u003cp\u003e\nRestore proper front suspension geometry on your lifted Toyota 4Runner or FJ Cruiser with this premium billet aluminium front sway bar relocation kit, precision CNC-machined for permanent durability and optimal sway bar alignment after 2\"+ lift modifications. After installing a 2-inch or larger lift on your 4Runner or FJ Cruiser, the factory sway bar mounting position becomes geometrically misaligned with the lifted suspension travel — causing increased chassis noise from sway bar interference with suspension components, uncoordinated suspension movement, reduced cornering support on uneven terrain, and diminished steering precision. Standard shim solutions deform under load and use corrosion-prone hardware that fails over time. This relocation kit solves all three problems with rigid billet aluminium brackets that shift the sway bar mounting position 1\" forward, restoring optimal sway bar angle and proper suspension coordination for lifted overland and off-road builds.\n\u003c\/p\u003e\n\n\u003ch6\u003eFeatures:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight and durable construction – billet aluminium material delivers exceptional strength while keeping weight low for off-road and overland applications\u003c\/li\u003e\n\u003cli\u003eCNC machined precision – ensures high dimensional accuracy for perfect fitment to factory sway bar mounting points\u003c\/li\u003e\n\u003cli\u003eAnodized surface finish – delivers rust-proof and anti-corrosion protection for sustained outdoor, off-road, and weather exposure\u003c\/li\u003e\n\u003cli\u003eHigh-strength grade 10.9 mounting screws – included Dacromet-finished hardware delivers superior strength and corrosion resistance compared to standard fasteners\u003c\/li\u003e\n\u003cli\u003eSway bar forward shift design – relocates the front sway bar 1\" forward to optimize geometry on vehicles with 2\"+ lift modifications, eliminating interference and restoring proper suspension function\u003c\/li\u003e\n\u003cli\u003eComplete installation kit – includes brackets, high-strength screws, and spacers needed for professional-grade installation\u003c\/li\u003e\n\u003cli\u003eDirect OE replacement design – installs to factory mounting locations with included hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eSpecifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: 100% Brand New\u003c\/li\u003e\n\u003cli\u003eType: Front Sway Bar Relocation Kit (1\" Forward Shift)\u003c\/li\u003e\n\u003cli\u003eMaterial: Billet Aluminium\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC Machined\u003c\/li\u003e\n\u003cli\u003eSurface Finish: Anodized\u003c\/li\u003e\n\u003cli\u003eMounting Hardware: Grade 10.9 High-Strength Screws with Dacromet Coating\u003c\/li\u003e\n\u003cli\u003eItem Weight: 0.961 kg\u003c\/li\u003e\n\u003cli\u003eQuantity: Complete Kit (2 Brackets + 8 Screws + 4 Spacers)\u003c\/li\u003e\n\u003cli\u003eMounting Position: Above Factory Sway Bar Mounting Bracket\u003c\/li\u003e\n\u003cli\u003ePosition on Vehicle: Front\u003c\/li\u003e\n\u003cli\u003eDesigned For: 2\"+ Lift Modifications\u003c\/li\u003e\n\u003cli\u003ePurpose: Sway Bar Geometry Correction \/ Lift Compensation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eOE \/ Replacement Part Numbers:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e48824-60190\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eFitment:\u003c\/h6\u003e\n\u003cp\u003e\u003cstrong\u003eNon-KDSS models only. KDSS-equipped vehicles use a different sway bar system and are NOT compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eToyota 4Runner – Non-KDSS (2010 – 2024)\u003c\/li\u003e\n\u003cli\u003eToyota FJ Cruiser – Non-KDSS (2010 – 2014)\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for vehicles with 2-inch or larger lift modifications – not intended for stock-height vehicles\u003c\/li\u003e\n\u003cli\u003eCompatible with factory sway bar mounting points only – not compatible with KDSS (Kinetic Dynamic Suspension System) equipped vehicles which use a hydraulically interconnected sway bar system\u003c\/li\u003e\n\u003cli\u003eConfirm vehicle model, lift height, and KDSS configuration before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eContents:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e2x Billet Aluminium Sway Bar Relocation Brackets\u003c\/li\u003e\n\u003cli\u003e8x Grade 10.9 High-Strength Mounting Screws (Dacromet Finish)\u003c\/li\u003e\n\u003cli\u003e4x Spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eBenefits:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eRestores proper sway bar geometry on lifted 4Runner and FJ Cruiser builds – eliminating the noise, interference, and handling compromises that develop with stock sway bar positioning at 2\"+ lift heights\u003c\/li\u003e\n\u003cli\u003eEliminates chassis noise caused by sway bar interference with suspension components – the persistent clunking and rubbing sounds common to lifted vehicles with unmodified sway bar positioning are resolved\u003c\/li\u003e\n\u003cli\u003eImproves cornering support and traction on bumpy off-road terrain – correct sway bar geometry allows the suspension to articulate properly while maintaining body control\u003c\/li\u003e\n\u003cli\u003eRestores steering precision and predictable handling on lifted vehicles – proper sway bar alignment ensures consistent suspension response under all driving conditions\u003c\/li\u003e\n\u003cli\u003eBillet aluminium construction delivers significantly higher durability than standard shim solutions – will not deform or fail under sustained off-road loads\u003c\/li\u003e\n\u003cli\u003eGrade 10.9 Dacromet-coated hardware provides superior corrosion resistance compared to standard zinc-plated fasteners – critical for vehicles exposed to mud, water, and salt during off-road use\u003c\/li\u003e\n\u003cli\u003eSignificant value for serious overland and off-road builders – addresses a real geometry problem with a permanent quality solution\u003c\/li\u003e\n\u003cli\u003eCompatible with the entire 2010-2024 4Runner production range and 2010-2014 FJ Cruiser – versatile upgrade for the popular Toyota off-road platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eInstallation Notes:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift requirement:\u003c\/strong\u003e This kit is specifically designed for vehicles with 2-inch or larger lift modifications. Installing on stock-height vehicles will NOT improve geometry and may actually create new interference issues\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKDSS incompatibility:\u003c\/strong\u003e This kit will NOT fit KDSS (Kinetic Dynamic Suspension System) equipped 4Runner or FJ Cruiser models. KDSS vehicles use a hydraulically interconnected sway bar system with different mounting geometry\u003c\/li\u003e\n\u003cli\u003eVerify your vehicle is non-KDSS before ordering – KDSS-equipped vehicles can be identified by the hydraulic actuator visible at the sway bar mounting point\u003c\/li\u003e\n\u003cli\u003eProperly support the front of the vehicle on jack stands rated for the vehicle weight before beginning installation – never work under a vehicle supported only by a jack\u003c\/li\u003e\n\u003cli\u003eLoosen the factory sway bar mounting hardware before removal to ensure smooth installation of the new brackets\u003c\/li\u003e\n\u003cli\u003ePosition the relocation brackets above the factory sway bar mounting bracket location – use the included spacers as required for proper alignment\u003c\/li\u003e\n\u003cli\u003eTighten the included grade 10.9 mounting screws to manufacturer-specified torque values – do not overtighten, which can damage the aluminium brackets\u003c\/li\u003e\n\u003cli\u003eVerify proper sway bar clearance and free movement through the full suspension travel range after installation – check for any interference points before driving\u003c\/li\u003e\n\u003cli\u003eTest handling and chassis behavior at low speeds before aggressive driving – verify resolved chassis noise and improved suspension response\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended if you are unfamiliar with suspension modification procedures\u003c\/li\u003e\n\u003cli\u003eIf unsure about compatibility with your specific 4Runner or FJ Cruiser variant, lift configuration, or KDSS status, contact our team with your year, model, lift height, and suspension configuration before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWarranty:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e12-month standard warranty from date of purchase\u003c\/li\u003e\n\u003cli\u003eContact our support team for assistance with any issues\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Black","offer_id":46015630541034,"sku":"1005010266842570-black","price":89.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":46057059090666,"sku":"1005010266842570-Red","price":89.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/S3baa7e673f234b8491ab8181699e588bE.webp?v=1777564269","url":"https:\/\/www.k2-industries.com\/en-au\/products\/bevinsee-front-sway-bar-relocation-kit-for-toyota-4runner-2010-2024-for-toyota-fj-cruiser-2010-2014-replace-for-48824-60190","provider":"K2 Industries","version":"1.0","type":"link"}