{"title":"Camburg","description":null,"products":[{"product_id":"camburg-1-00-uniball-replacement-kit-pair","title":"Camburg 1.00 Uniball Replacement Kit (Pair)","description":"This kit is what's required to rebuild the uniballs in your Camburg upper arms, spindles and lower arm inner pivots. The kit includes two FK 1.00\" uniballs and two snap rings. These are made in the USA and are not some cheap imported parts. For optimum strength they are heat-treated and have a self-lubricating military grade PTFE liner internally for reduced stiction and noise. Having a 90,000 lbs. load rating, these are far stronger than OEM style ball-joints and cheaper or smaller uniball bearings. The bearing ID with the mis-alignment spacers removed is 1.00\" and the bearing OD is 2.125\".Refer to our instructions for step-by-step directions.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768427110634,"sku":"CMBCAM-010046","price":150.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/bc8da7959e8a1df84de959e2cefb8b7bL.jpg?v=1775857130"},{"product_id":"camburg-1-25-uniball-replacement-kit-pair","title":"Camburg 1.25 Uniball Replacement Kit (pair)","description":"This kit is what’s required to rebuild the uniballs in your Camburg upper arms and some of our lower arms. The kit includes two FK 1.25 uniballs and two snap rings. These are made in the USA and are not some cheap imported parts.  They have a self-lubricating military grade PTFE liner internally for reduced stiction and noise. Having a 100,730 lbs. load rating, these are far stronger than OEM style ball-joints and cheaper or smaller uniball bearings. The bearing ID with the mis-alignment spacers removed is 1.25\" and the bearing OD is 2.375\".Refer to our instructions for step-by-step directions. Confirm sizing before ordering as some older version upper arms use a smaller 1.00\" uniball. Easiest way to tell is by the bolt. If the bolt is a hex head and above the uniball, than it's a 1\" uniball as the 1.25\" has the bolt recessed below.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768427176170,"sku":"CMBCAM-010047","price":160.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/bc8da7959e8a1df84de959e2cefb8b7bL_26b74688-d1ea-4ece-9139-6e37ff5061bc.jpg?v=1775858903"},{"product_id":"camburg-ford-raptor-10-14-1-25in-performance-uniball-upper-arms","title":"Camburg Ford Raptor 10-14 1.25in Performance Uniball Upper Arms","description":"When lifting your 10'-14' F-150 SVT Raptor, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more. Replacing the stock ball-joint with a larger Made in the USA FK uniball bearing with a military grade PTFE internal liner, we’re able to gain wheel travel with a part that is considerably stronger and allows for higher angle misalignment. Machined in-house, the uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder coated. We pride ourselves in producing the best parts available under our own roof and control. Step by step instructions, with all the necessary hardware, ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768427241706,"sku":"CMBCAM-110109","price":1122.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/aba758b72d4dd923327b8015821eb07cL.jpg?v=1775858908"},{"product_id":"camburg-ford-f-150-2wd-4wd-21-23-kinetik-v2-performance-billet-uniball-upper-arms","title":"Camburg Ford F-150 2WD\/4WD 21-23 KINETIK V2 Performance Billet Uniball Upper Arms","description":"Our 21'-25' F-150 KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized and laser etched. We utilize a larger FK 1.25\" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25\" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768427372778,"sku":"CMBCAM-110211-GRY","price":1766.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/8d90c44f0128f49ba1fb9d08af12a72dL.jpg?v=1775859220"},{"product_id":"camburg-ford-bronco-21-23-1-25in-performance-uniball-upper-arms-w-covers","title":"Camburg Ford Bronco 21-23 1.25in Performance Uniball Upper Arms (w\/Covers)","description":"When lifting your 21'-25' Bronco, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more. Replacing the stock ball-joint with a larger Made in the USA FK uniball bearing with a military grade PTFE internal liner, we’re able to gain wheel travel with a part that is considerably stronger and allows for higher angle misalignment. Machined in-house, the uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder coated. We pride ourselves in producing the best parts available under our own roof and control. Step by step instructions, with all the necessary hardware, ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768427438314,"sku":"CMBCAM-110213","price":1142.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/b77ab9228fbb71cdd45e27479e516bf9L.jpg?v=1775859376"},{"product_id":"camburg-ford-bronco-21-23-kinetik-v2-performance-billet-uniball-upper-arms","title":"Camburg Ford Bronco 21-23 KINETIK V2 Performance Billet Uniball Upper Arms","description":"Our 21'-25' Bronco KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized and laser etched. We utilize a larger FK 1.25\" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25\" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768427503850,"sku":"CMBCAM-110214-GRY","price":1766.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/0553338489735b75e8135490180587d0L.jpg?v=1775859543"},{"product_id":"camburg-ford-raptor-21-23-1-5in-front-spring-preload-spacer-kit-fox-orange","title":"Camburg Ford Raptor 21-23 1.5in Front Spring Preload Spacer Kit (Fox Orange)","description":"Our Camburg coil spring preload kits are a cost effective and easy way to lift and level the front of your '21-25 Gen3 Ford Raptor while still keeping the plush factory ride with the OEM Fox coilovers. Lifting the front also increases your compression travel which is a great benefit off-roading. We offer them in black and FOX orange versions. Don’t confuse these with standard cheap “spacer\" lifts. These preload the coil spring, they do not space the shock down allowing the suspension to droop out too far and lose compression travel by bottoming out the shock sooner. Running a taller tire will also increase needed ground clearance when off-roading. We CNC machine these in-house from aerospace quality 6061-T6 aluminum, then have them anodized and laser etched. These install easily onto your factory OEM Fox coilovers and lift the front end 1.5\". These are not designed to be used with aftermarket coil springs on the OEM stock shocks. Combine these with our KINETIK series billet upper control arms and trailing arms to correct and improve geometry for better handling. Use of a spring compressor required to install Can not be used in conjunction with an aftermarket coil spring Designed for the OEM FOX LiveValve shocks.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768427569386,"sku":"CMBCAM-110227-ORG","price":414.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/cd849d48c27fb778eccc6d31f2a129f1L.jpg?v=1775859732"},{"product_id":"camburg-ford-raptor-17-23-kinetik-v2-performance-billet-uniball-upper-arms","title":"Camburg Ford Raptor 17-23 KINETIK V2 Performance Billet Uniball Upper Arms","description":"Our 17'-25' F-150 Raptor KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized and laser etched. We utilize a larger FK 1.25\" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25\" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768427864298,"sku":"CMBCAM-110233-GRY","price":1974.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/6ff2d4482eea166102e9ff929fbe6b22L.jpg?v=1775861679"},{"product_id":"camburg-ford-raptor-17-23-kinetik-v2-performance-billet-uniball-upper-arms-red","title":"Camburg Ford Raptor 17-23 KINETIK V2 Performance Billet Uniball Upper Arms (Red)","description":"Our 17'-25' F-150 Raptor KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized and laser etched. We utilize a larger FK 1.25\" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25\" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768428093674,"sku":"CMBCAM-110233-RED","price":2078.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/f393f246a0aaf80d6cb82aca619726a5L.jpg?v=1775861808"},{"product_id":"camburg-chevy-gmc-1500-2wd-4wd-19-23-1-25in-performance-uniball-upper-arms","title":"Camburg Chevy\/GMC 1500 2WD\/4WD 19-23 1.25in Performance Uniball Upper Arms","description":"When lifting your 19'-24' Silverado 1500, 19'-24' Sierra 1500, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more. Replacing the stock ball-joint with a larger Made in the USA FK uniball bearing with a military grade PTFE internal liner, we’re able to gain wheel travel with a part that is considerably stronger and allows for higher angle misalignment. Machined in-house, the uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder coated. We pride ourselves in producing the best parts available under our own roof and control. Step by step instructions, with all the necessary hardware, ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768428421354,"sku":"CMBCAM-210065","price":1090.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/7ba411b4108da4dbf5f8d6689d14049cL.jpg?v=1777026090"},{"product_id":"camburg-chevy-colorado-zr2-17-22-1-25in-performance-heim-uniball-upper-arms-w-covers","title":"Camburg Chevy Colorado ZR2 17-22 1.25in Performance Heim\/Uniball Upper Arms (w\/ covers)","description":"When lifting your 17'-22' Colorado ZR2, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more. Replacing the stock ball-joint with a larger Made in the USA FK uniball bearing with a military grade PTFE internal liner, we’re able to gain wheel travel with a part that is considerably stronger and allows for higher angle misalignment. Machined in-house, the uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder coated. We pride ourselves in producing the best parts available under our own roof and control. Step by step instructions, with all the necessary hardware, ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768428486890,"sku":"CMBCAM-210096","price":1454.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/f7e8cdf5bc65ded6bc62828febd318aeL.jpg?v=1775861849"},{"product_id":"camburg-toyota-tacoma-pre-4wd-96-04-4-runner-96-02-1in-performance-uniball-upper-arms","title":"Camburg Toyota Tacoma Pre 4WD 96-04 \/ 4-Runner 96-02 1in Performance Uniball Upper Arms","description":"When lifting your 96'-02' 4Runner, 96'-04' Tacoma 4WD, 98'-04' Tacoma Pre Runner, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more. Replacing the stock ball-joint with a larger Made in the USA FK uniball bearing with a military grade PTFE internal liner, we’re able to gain wheel travel with a part that is considerably stronger and allows for higher angle misalignment. Machined in-house, the uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder coated. We pride ourselves in producing the best parts available under our own roof and control. Step by step instructions, with all the necessary hardware, ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768428617962,"sku":"CMBCAM-310005","price":966.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/0acab406b1c25baa495f1cf5d837e00bL.jpg?v=1775861989"},{"product_id":"camburg-toyota-tundra-2wd-4wd-00-06-1in-performance-uniball-upper-arms","title":"Camburg Toyota Tundra 2WD\/4WD 00-06 1in Performance Uniball Upper Arms","description":"When lifting your 00'-06' Tundra, 01'-07' Sequoia, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more. Replacing the stock ball-joint with a larger Made in the USA FK uniball bearing with a military grade PTFE internal liner, we’re able to gain wheel travel with a part that is considerably stronger and allows for higher angle misalignment. Machined in-house, the uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder coated. We pride ourselves in producing the best parts available under our own roof and control. Step by step instructions, with all the necessary hardware, ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768428880106,"sku":"CMBCAM-310006","price":882.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/0acab406b1c25baa495f1cf5d837e00bL_03a798f5-b960-4883-975c-5c24e52c39f2.jpg?v=1775862013"},{"product_id":"camburg-05-23-toyota-tacoma-00-06-tundra-03-24-4-runner-uca-bushing-sleeve-kit","title":"Camburg 05-23 Toyota Tacoma \/ 00-06 Tundra \/ 03-24 4-Runner UCA Bushing\/Sleeve Kit","description":"Here's an easy way to freshen up your upper arms. Our Camburg upper arm bushing and sleeve rebuild kits include our replacement polyurethane bushings, inner pivot sleeves, 90 degree zerk grease fittings along with our super bushing grease packets. We even throw in some of our Camburg stickers to freshen up the back window of your truck or your tool box. If you're going to spend the time to pull the arms off your truck, let's get you all the parts you need so you can get the job done quick and easy.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768428945642,"sku":"CMBCAM-310023","price":116.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/be12f6ae982f7e32c345a642e7ed3f28L.jpg?v=1775862169"},{"product_id":"camburg-toyota-tacoma-pre-4wd-05-23-4-runner-03-23-fj-07-14-1-25in-uniball-upper-arms","title":"Camburg Toyota Tacoma Pre\/4WD 05-23 \/ 4-Runner 03-23 \/ FJ 07-14 1.25in Uniball Upper Arms","description":"When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.25 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD\/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768428978410,"sku":"CMBCAM-310036","price":1122.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/463d7d8028c2e32a277392c359dcd600L.jpg?v=1775862181"},{"product_id":"camburg-toyota-tundra-2wd-4wd-07-21-1-5in-performance-uniball-upper-arms","title":"Camburg Toyota Tundra 2WD\/4WD 07-21 1.5in Performance Uniball Upper Arms","description":"When lifting your 07'-21' Tundra, 08'-22' Sequoia, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more. Replacing the stock ball-joint with a larger Made in the USA FK uniball bearing with a military grade PTFE internal liner, we’re able to gain wheel travel with a part that is considerably stronger and allows for higher angle misalignment. Machined in-house, the uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder coated. We pride ourselves in producing the best parts available under our own roof and control. Step by step instructions, with all the necessary hardware, ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768429043946,"sku":"CMBCAM-310041","price":1049.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/8321572313c48e5d06e63fa1bacf981dL.jpg?v=1775862325"},{"product_id":"camburg-toyota-tacoma-pre-4wd-05-23-performance-x-joint-upper-arms","title":"Camburg Toyota Tacoma Pre\/4WD 05-23 Performance X-Joint Upper Arms","description":"When lifting your 05'-23' Tacoma, 06'-15' Tacoma 4WD, the stock upper arms become the limiting factor and hold back your suspension's performance. Our Camburg upper arms address these issues and more. We build more caster and change the camber curve to correct geometry, so the vehicle aligns correctly and improves driving characteristics and handling. We replace the stock ball-joint with our Camburg X-Joint for increased strength, longevity and high misalignment, allowing for maximum wheel travel. The X-Joint is a high performance, all-weather, all conditions, high angle ball joint. These fully sealed and greaseable joints are perfect for extreme conditions, so dirt, sand, rain, mud and snow are no match for them. The tubular construction also gives you more tire \u0026amp; shock clearance compared to the weaker stock stamped sheet metal arms. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder coated. Step by step instructions, with all the necessary hardware, ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768429109482,"sku":"CMBCAM-310078","price":1142.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/1f0842f80ab42e7d30ed08f8a422f7bdL.jpg?v=1775862345"},{"product_id":"camburg-toyota-4-runner-03-23-fj-07-14-performance-x-joint-upper-arms","title":"Camburg Toyota 4-Runner 03-23 \/ FJ 07-14 Performance X-Joint Upper Arms","description":"When lifting your 03'-09' GX470, 10'-22' GX460, 03'-24' 4Runner, 07'-14' FJ Cruiser, the stock upper arms become the limiting factor and hold back your suspension's performance. Our Camburg upper arms address these issues and more. We build more caster and change the camber curve to correct geometry, so the vehicle aligns correctly and improves driving characteristics and handling. We replace the stock ball-joint with our Camburg X-Joint for increased strength, longevity and high misalignment, allowing for maximum wheel travel. The X-Joint is a high performance, all-weather, all conditions, high angle ball joint. These fully sealed and greaseable joints are perfect for extreme conditions, so dirt, sand, rain, mud and snow are no match for them. The tubular construction also gives you more tire \u0026amp; shock clearance compared to the weaker stock stamped sheet metal arms. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder coated. Step by step instructions, with all the necessary hardware, ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768429175018,"sku":"CMBCAM-310079","price":1028.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/1f0842f80ab42e7d30ed08f8a422f7bdL_1b42a3a1-a028-4412-9f85-0b92644e5210.jpg?v=1775862499"},{"product_id":"camburg-toyota-tundra-2wd-4wd-07-21-performance-x-joint-upper-arms","title":"Camburg Toyota Tundra 2WD\/4WD 07-21 Performance X-Joint Upper Arms","description":"When lifting your 07'-21' Tundra, 08'-22' Sequoia, the stock upper arms become the limiting factor and hold back your suspension's performance. Our Camburg upper arms address these issues and more. We build more caster and change the camber curve to correct geometry, so the vehicle aligns correctly and improves driving characteristics and handling. We replace the stock ball-joint with our Camburg X-Joint for increased strength, longevity and high misalignment, allowing for maximum wheel travel. The X-Joint is a high performance, all-weather, all conditions, high angle ball joint. These fully sealed and greaseable joints are perfect for extreme conditions, so dirt, sand, rain, mud and snow are no match for them. The tubular construction also gives you more tire \u0026amp; shock clearance compared to the weaker stock stamped sheet metal arms. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder coated. Step by step instructions, with all the necessary hardware, ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768429240554,"sku":"CMBCAM-310083","price":1049.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/82bcf98ebb4dbe3b08b0426b31d7b232L.jpg?v=1775862645"},{"product_id":"camburg-toyota-tacoma-pre-4wd-05-23-4-runner-03-23-fj-07-14-1-25in-uniball-upper-arms-w-covers","title":"Camburg Toyota Tacoma Pre\/4WD 05-23 \/ 4-Runner 03-23 \/ FJ 07-14 1.25in Uniball Upper Arms w\/ covers","description":"When lifting your, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more. Replacing the stock ball-joint with a larger Made in the USA FK uniball bearing with a military grade PTFE internal liner, we’re able to gain wheel travel with a part that is considerably stronger and allows for higher angle misalignment. Machined in-house, the uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder coated. We pride ourselves in producing the best parts available under our own roof and control. Step by step instructions, with all the necessary hardware, ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768429633770,"sku":"CMBCAM-310130","price":1142.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/6f67516d2440cbcc1b84a7bf637efdadL.jpg?v=1775862666"},{"product_id":"camburg-toyota-tacoma-05-23-4-runner-03-23-fj-07-14-kinetik-v2-uniball-upper-arms-king-blue","title":"Camburg Toyota Tacoma 05-23 \/ 4-Runner 03-23 \/ FJ 07-14 KINETIK V2 Uniball Upper Arms (King Blue)","description":"Our KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized and laser etched. We utilize a larger FK 1.25\" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25\" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768429699306,"sku":"CMBCAM-310184-BLU","price":1766.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/884468c4fabaa272a220494c6fffdc32L.jpg?v=1775862821"},{"product_id":"camburg-toyota-tacoma-05-23-4-runner-03-23-fj-07-14-kinetik-v2-billet-uniball-upper-arms","title":"Camburg Toyota Tacoma 05-23 \/ 4-Runner 03-23 \/ FJ 07-14 KINETIK V2 Billet Uniball Upper Arms","description":"Our KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized and laser etched. We utilize a larger FK 1.25\" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25\" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768429764842,"sku":"CMBCAM-310184-GRY","price":1662.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/b1991c93631b7d103afe36f1e51ce39bL.jpg?v=1775862827"},{"product_id":"camburg-toyota-tacoma-05-23-4-runner-03-23-fj-07-14-kinetik-v2-billet-uniball-upper-arms-red","title":"Camburg Toyota Tacoma 05-23 \/ 4-Runner 03-23 \/ FJ 07-14 KINETIK V2 Billet Uniball Upper Arms (Red)","description":"Our KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized and laser etched. We utilize a larger FK 1.25\" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25\" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768430059754,"sku":"CMBCAM-310184-RED","price":1766.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/f1d266f0ead050c7ab2456d1cf1a56edL.jpg?v=1775862990"},{"product_id":"camburg-toyota-tundra-2wd-4wd-22-23-kinetik-v2-performance-billet-uniball-upper-arms-king-blue","title":"Camburg Toyota Tundra 2WD\/4WD 22-23 KINETIK V2 Performance Billet Uniball Upper Arms (King Blue)","description":"Our 22'-25' Tundra, 23'-25' Sequoia KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized and laser etched. We utilize a larger FK 1.25\" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25\" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768430190826,"sku":"CMBCAM-310189-BLU","price":1870.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/3740de1c24d0dd1df6e657c94a1ad9e1L.jpg?v=1775863144"},{"product_id":"camburg-toyota-tundra-2wd-4wd-22-23-kinetik-v2-performance-billet-uniball-upper-arms","title":"Camburg Toyota Tundra 2WD\/4WD 22-23 KINETIK V2 Performance Billet Uniball Upper Arms","description":"Our 22'-25' Tundra, 23'-25' Sequoia KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized and laser etched. We utilize a larger FK 1.25\" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25\" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768430256362,"sku":"CMBCAM-310189-GRY","price":1766.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/f598008b98f8f8bcb16b7c485363a64dL.jpg?v=1775863149"},{"product_id":"camburg-toyota-22-23-landcruiser-300-22-23-lx600-kinetik-v2-perf-billet-uniball-upper-arms","title":"Camburg Toyota 22-23 Landcruiser 300 \/ 22-23 LX600 KINETIK V2 Perf Billet Uniball Upper Arms","description":"Our 22'-25' LX600, 24'-25' GX550, 25' 4Runner, 24'-25' Land Cruiser, 24'-25' Tacoma KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized Gray and laser etched. We utilize a larger FK 1.25\" uniball with a military grade PTFE internal liner for increased strength, longevity and higher misalignment, allowing for maximum wheel travel. The uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, for a precision fit without the need for drilling or modifications. The 1.25\" uniball allows for a larger and stronger 12-point bolt with a low-profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is available with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure a successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768430321898,"sku":"CMBCAM-310194-GRY","price":1974.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/87bdd9fa8c6156a3b23334b3be327804L.jpg?v=1775863325"},{"product_id":"camburg-22-24-toyota-tundra-2wd-4wd-dominator-preload-spacer-kit","title":"Camburg 22-24 Toyota Tundra 2wd \/4wd Dominator Preload Spacer Kit","description":"Camburg's Dominator Preload System is a game-changer in the leveling suspension market. It replaces the top hat of OE shocks with a one-piece billet aluminum design that not only preloads the coil spring but also provides added lift. This innovative system ensures that suspension, steering, and driveline components operate within OE working limitations, preventing wear and failures. The added lift and preload allow for larger tires, increasing ground clearance and improving approach angles. It also offers better bottoming control and minimizes front end dive and body roll while maintaining a plush ride. CNC machined from aerospace 6061-T6 billet aluminum, red anodized, and laser-etched, the Dominator Preload System is a high-quality product. It includes all necessary hardware for a hassle-free installation and is suitable for both seasoned off-road enthusiasts and weekend warriors. Upgrade your stock vehicle for your next off-road adventure with Camburg's Dominator Preload System. This system  features patented designs under U.S. Patent Number 12611907.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768430518506,"sku":"CMBCAM-310203","price":623.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/9f6f88429225153a00144f5313e02f13L.jpg?v=1775865435"},{"product_id":"camburg-05-23-toyota-tacoma-03-24-toyota-4runner-dominator-preload-spacer-kit","title":"Camburg 05-23 Toyota Tacoma \/ 03-24 Toyota 4Runner Dominator Preload Spacer Kit","description":"Camburg's Dominator Preload System is a game-changer in the leveling suspension market. It replaces the top hat of OE shocks with a one-piece billet aluminum design that not only preloads the coil spring but also provides added lift. This innovative system ensures that suspension, steering, and driveline components operate within OE working limitations, preventing wear and failures. The added lift and preload allow for larger tires, increasing ground clearance and improving approach angles. It also offers better bottoming control and minimizes front end dive and body roll while maintaining a plush ride. CNC machined from aerospace 6061-T6 billet aluminum, red anodized, and laser-etched, the Dominator Preload System is a high-quality product. It includes all necessary hardware for a hassle-free installation and is suitable for both seasoned off-road enthusiasts and weekend warriors. Upgrade your stock vehicle for your next off-road adventure with Camburg's Dominator Preload System. This system  features patented designs under U.S. Patent Number 12611907.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768430584042,"sku":"CMBCAM-310205","price":415.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/6f0beedec6ab35ca38d8970742c11fc8L.jpg?v=1775865587"},{"product_id":"camburg-2024-toyota-tacoma-2wd-4wd-kinetik-v2-performance-billet-x-joint-xl-upper-arms-king-blue","title":"Camburg 2024 Toyota Tacoma 2WD\/4WD KINETIK V2 Performance Billet X-Joint XL Upper Arms (KING BLUE)","description":"Our 22'-25' LX600, 24'-25' GX550, 25' 4Runner, 24'-25' Land Cruiser, 24'-25' Tacoma KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handling both on and off-road and are considerably higher quality and higher strength compared to the OEM parts for off-road use. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, Type II anodized Blue and laser etched. They utilize our new Camburg X-joint XL for increased strength, longevity and high misalignment, allowing for maximum wheel travel. The larger X-Joint XL is an extreme performance, all-weather, all conditions, high angle ball joint. These are much higher quality, considerably stronger and have an improved boot design that allows for higher angle use, better greasing and increased longevity. With higher strength heat-treated chromoly materials and an improved design, we were able to vastly improve upon what was available on the market. These fully sealed and greaseable joints are perfect for extreme conditions, so dirt, sand, rain, mud and snow are no match for them. Additional camber and caster adjustment is available with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and heavy braking without binding. Step by step instructions with all the necessary hardware ensure successful installation for your next off-road adventure.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":45768430977258,"sku":"CMBCAM-310277-BLU","price":2130.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/files\/7675a97bf4a4e45415dd87514b3f81e5L.jpg?v=1775865794"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0477\/0427\/7142\/collections\/cropped-camburg-logo.png?v=1782252670","url":"https:\/\/www.k2-industries.com\/collections\/camburg.oembed?page=2","provider":"K2 Industries","version":"1.0","type":"link"}